Take the 2-minute tour ×
Geographic Information Systems Stack Exchange is a question and answer site for cartographers, geographers and GIS professionals. It's 100% free, no registration required.

I have a survey point data which has coordinates X,Y, Height, Angle(Dip),Azimuth, and Depth(Distance). for Example, point A:

Easting: 290694

Northing: 715927

Elevation: 1060

Angle: 65°

Azimuth:45°

Distance:150

Can you please let me know hoe I can calculate the end point(End of trace) Height? Thanks for your time and comments

share|improve this question
add comment

1 Answer 1

up vote 5 down vote accepted

The angle, azimuth, and distance are a form of spherical coordinates for the displacement from the initial position:

  • The horizontal displacement is a multiple of the distance. That multiple depends on the dip. The multiple--by definition--is called the cosine of the dip.

  • The vertical displacement is also a multiple of the distance. That multiple also depends only on the dip. Once again, by definition, the multiple is called the sine of the dip. But we must be careful to consider the dip a negative angle.

  • The northing and easting are, in a similar fashion, multiples of the horizontal displacement. Assuming the azimuth is measured east of north, the multiple to use for the northern displacement is the cosine of the azimuth and the multiple to use for the eastern displacement is the sine of the azimuth.

In the example given,

cos(dip) = cos(-65 degrees) = cos(-65/180 * pi radians) =  0.4226183;
sin(dip) = sin(-65/180 * pi radians) =  -0.9063078.

Therefore the vertical displacement equals 150 * -0.9063078 = -135.9462. For the sake of continuing the calculation, I will assume the distance and the elevation are measured in the same units. (If not, then of course the units have to be made commensurable before adding them.) Whence the elevation of at the end of the displacement is 1060 + -135.9462 = 924.0538.

Similarly the horizontal displacement equals 150 * 0.4226183 = 63.39274. In order to continue the calculation, I will assume the distance and the (easting, northing) coordinates are measured in the same units. (If not, then the units have to be made commensurable before proceeding.) We compute

cos(azimuth) = cos(45 degrees) = cos(45/180 * pi radians) = 0.7071068;
sin(azimuth) = sin(45/180 * pi radians) = 0.7071068.

Therefore the northern displacement is 63.39274 * 0.7071068 = 44.82544 and the eastern displacement works out to the same (because the sine and cosine of this particular azimuth happen to be equal). Whence the ground coordinates of the end of the displacement are

(290694, 715927) + (44.82544, 44.82544) = (290738.82544, 715971.82544).

As a double-check let's compute the distance between the start and end:

distance((290694, 715927, 1060), (290738.82544, 715971.82544, 924.0538))
= sqrt((290694 - 290738.82544)^2 + (715927 - 715971.82544)^2 + (1060 - 924.0538)^2)
= 150.0000,

as intended. We can also plot the two points and visually check that the angles look about right: that's a good idea when testing out these calculations on an unfamiliar computing platform, because it detects the common mistakes of (1) confusing radians and degrees, (2) mixing up sines and cosines, (3) not using the correct signs for the angles, and (4) not performing units conversions where needed.

share|improve this answer
    
Wow, Thanks a lot! Honestly I need to re-read this several times but to completely understand what is happening :-).So by this method you calculate both Height and Position of the point B? am I right? –  user1106951 Jul 28 '12 at 17:04
    
Yes, that is correct. If all you want is the height, then you can omit the calculations of position altogether. (Notice that the height depends only on the original elevation and the dip but not on the easting, northing, or azimuth.) Because variations of this question have occurred, and will likely occur again, I provided a full answer for future reference. –  whuber Jul 28 '12 at 18:07
    
Perfect, thanks –  user1106951 Jul 28 '12 at 20:20
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.