Take the 2-minute tour ×
Geographic Information Systems Stack Exchange is a question and answer site for cartographers, geographers and GIS professionals. It's 100% free, no registration required.

I am trying to delineate watersheds automatically using Arcgis/Achydro. I got the drainage area contribution of stream segment (part of stream) as shown in figure stream. The corresponding drainage area as shown in figure area. But I am looking for drainage areas/catchment areas as shown in figure Water Shed. In watershed figure , at any point on the stream, it calculates drainage area by considering entire upstream length of the stream. Suppose, if you choose point "8", its catchment/drainage area covers the area of points "9" and "10". Similarly for point "5" covers all points upstream of stream. I want to get similar automatic watershed delineations. Please guide me to the software/method to get the result as shown in figure watershed for my entire stream network of an area. Stream Area WaterShed

share|improve this question
add comment

2 Answers

The areas you are looking to create are called "subwatersheds" or subsheds. You can use the "Batch Subwatershed Delineation" tool in ArcHydro under the "Watershed Processing" menu. This will calculate subsheds from a set of points you define. The other input is a flow direction grid. This is a raster where the value of each pixel represents the direction water would flow from this pixel (N, NE, E, SE, S, SW, W, NW).

The data you have in your screenshots look like the 1:100,000 resolution National Hydrography Dataset (NHD). If this is the case, the NHDPlus dataset has a flow direction grid already calculated that you can download. Otherwise, you will need to use the "Flow Direction" tool in ArcHydro under the "Terrain Preprocessing" menu to manually calculate flow direction from an input digital elevation model (DEM).

Note that the spatial resolution of your subwatersheds is limited to the spatial resolution of the input DEM.

share|improve this answer
    
Thanks for your reply. I have given figure watershed with limited points(10) for understanding. If it is the case, I can choose each point and calculate corresponding areas by using batch process in archydro. But in my case, to my entire stream network, I have taken points at equal interval(say 100m). so I got points in multiple of thousands along the stream (entire network include branches). In this case I cannot take each and every point along the main stream and branches and do batch process to get result.Hence I need a automatic process to calculate by any software or by any method.pls.. –  A.D.Prasad Aug 5 '12 at 14:56
    
@prasad Sorry, I don't understand. Why can't you use the batch processing? –  dmahr Aug 5 '12 at 15:07
    
If there are few points, then we can select those points as outlets in batch process to calculate subwatersheds. Here are many (thousands of points along the stream) points and selecting each and every point and delineate subwatershed with batch process is hectic process.Hence I need a automatic process to calculate by any software or by any method. –  A.D.Prasad Aug 5 '12 at 15:38
    
Some time ago I did for 25000 points. You do not need any scripting for this. –  Tomek Jul 10 '13 at 5:59
add comment

I Googled this when I faced the same issue, and found the solution is using the 'Append' tool in Data Management > General. This will copy all the stream gauges' coordinates into a point file. I think this can be done for raster (as in your case) with somewhat more processing.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.