Take the 2-minute tour ×
Geographic Information Systems Stack Exchange is a question and answer site for cartographers, geographers and GIS professionals. It's 100% free, no registration required.

we are developing a web based GIS platform. We were planning to use Google maps' satellite view as BASE LAYER and serve WMS content through Geoserver as NON-BASE LAYERS. However since our application will also support premium content for registered users this violates Google's terms of use for the GoogleMaps API, and not only that.. It seems that it also violates Microsoft's Bing Maps and Nokia Maps ToU

particularly for the latter due to the following clause in its terms of use:

6.3 Use of the Service When using the Service, unless otherwise agreed in writing with Nokia, You hereby agree that You will not: vi) create an Application which displays any Content outside of the Service. For example, You may not use Content outside of the Nokia Maps service. You may not combine, mix or commingle any Content or Features with third party APIs, services or content similar to the Content or Features provided by the Service, for example with any third party map;

Since the area we will cover with our platform is relativelly small I was thinking to purchase georeferenced aerial images from a provider i.e. Terraserver and use them as a BASE LAYER, however (a) the cost - although considerably less to licensing - is still a barrier and (b) implementation complexity is increased,

Any recommendations or ideas on other options? All thoughts are welcomed and appreciated,

share|improve this question
1  
Which country (or countries) does the app need to show? –  user3461 Sep 21 '12 at 12:44
1  
Knowing the country will be important. Also, what resolution will be important as well. If you are in the US, you may want to look at the USGS, they have ortho quads available (1 foot pixels I believe). Check their licensing. Also, Landsat satellite imagery is available world wide, but the resolution ranges from 15 to 30 metres. –  Ryan Garnett Sep 21 '12 at 12:56
    
Country of interest is Greece, resolution at 1m. - see my second response below. –  Nik Sep 21 '12 at 14:42
add comment

1 Answer

MapQuest Open Aerial Tiles

Global Coverage (higher zoom level in the US)

MapQuest Open Aerial Tile URL example:

enter image description here

Terms of Use

The MapQuest Open Tiles are available for use for free under the following conditions: http://developer.mapquest.com/web/products/open/map#terms

MapQuest Open Aerial Tile URL example: http://oatile1.mqcdn.com/tiles/1.0.0/sat/15/5240/12661.jpg

Replace http://a.tile.openstreetmap.org with http://oatile1.mqcdn.com/tiles/1.0.0/sat.

Note: There are 4 subdomains set up for the MapQuest-hosted tiles: oatile1 to oatile4. All subdomains point to the same CDN. Just like with OSM’s a.tile to c.tile subdomains, the MapQuest subdomains are provided to work around browser limitations on the number of simultaneous HTTP connections to each “host”. Browser-based applications can request multiple map tiles from multiple subdomains faster than requesting map tiles from just one subdomain.

Please also note that global coverage is provided at zoom levels 0-11. Zoom Levels 12+ are provided only in the United States (lower 48).

http://developer.mapquest.com/web/products/open/map

share|improve this answer
3  
If you want high resolution imagery - you will have to commercially purchase it or access to it - it costs a lot of money to send aircraft into air to capture this information. –  Mapperz Sep 21 '12 at 13:56
1  
I should have mentioned the country of interest which is Greece. In this case the resolution provided by Map_quest Open tiles is inadequate. I went through the YahooMaps license and it seems that for the time being their license is provided for commercial applications with just a few limitations - compared to other satellite map service providers . They do state however that this policy may change. I start to think that the best solution are aerial images. You do not need to worry for deprecated APIs and change of policies. –  Nik Sep 21 '12 at 14:43
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.