Take the 2-minute tour ×
Geographic Information Systems Stack Exchange is a question and answer site for cartographers, geographers and GIS professionals. It's 100% free, no registration required.

I have a DEM of my study area, and polyline shapefile of the Dams in that area.

I have run the standard Hydrology tools on it( Fill, Flow Direction & Flow Accumulation).

I know that you can find the Watershed contributing to a pour point, but how do you use the Damlines, to get the catchment Area contributing water to the dam's reservoir?

share|improve this question
add comment

3 Answers

I don't know of a function that does exactly what you ask, but I use Arc Hydro Tools to get the catchment areas and drainage lines. When following the drainage lines it is easy to determine which catchment areas that contribute to each water body (i have cut them out from my dem first, so that they are viewed as sinks in the calculations). After that, just select the relevant ones and export to a new shapefile, or whatever you want to do with it.

To get the drainage lines in AHT, you need to complete the following steps in the Terrain Preprocessing dropdown menu: Fill Sinks, Flow direction, Flow accumulation, Stream definition, Stream segmentation, Catchment grid delineation and Drainage line processing. For further information about each tool, visit the tutorial.

The same thing can probably be done with the standard Hydrology toolbox in Arcmap, but I'm not that familiar with it.

share|improve this answer
add comment

Conceptually I think the issue of a a dam line is misleading. Dams are built across an existing river valley, and will act to artificially truncate a watershed. So if you compute the stream network for your DEM using either archydro or the standard hydrology tools and find the point of intersection between the stream network and the dam line, you can use that as a pour point which will return the upstream contributing area of the area above the dam.

You can generate your pour point using the intersect tool, selecting the output feature as Point.

Another option would be to create the watershed for the entire dammed stream using the standard methods for delineating a watershed, and then simply clip the resulting polygon by the dam line to create the truncated watershed, although this seems like it would be more time and processor intensive than the above method.

share|improve this answer
add comment

You could try to put the point for delineation on the base of the dam. Then you could put other two points at the intersection of the upper part of the dam with the hillslopes.

There is also a scientific paper on this:

Holger Schäuble, Oswald Marinoni, Matthias Hinderer (2008) A GIS-based method to calculate flow accumulation by considering dams and their specific operation time, Computers & Geosciences, Volume 34, Issue 6, Pages 635-646.

share|improve this answer
    
The abstract looks interesting, but I couldn't read the actual article. Is there a freely accessible link to the article? –  Devdatta Tengshe Jan 31 '13 at 3:05
    
From that site no, but i founded a presentation and a manual for their software (on terracs.com) on google using the title. –  Niculita Mihai Jan 31 '13 at 4:48
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.