Take the 2-minute tour ×
Geographic Information Systems Stack Exchange is a question and answer site for cartographers, geographers and GIS professionals. It's 100% free, no registration required.

I am just curious about the workflow that many of you use for runoff/stream analysis using a DEM and create a "water network" from the results in ArcGIS 10.1? I know the average rainfall for different seasons throughout the year, but that's really all I have to work with for my area.

I mainly want to investigate where water will "end up" given a fairly large rain event. I am guessing you would use ArcHydro for this? Is there a different software suite or suite of tools that you would recommend for this?

Thanks!

share|improve this question
    
If any tool available in ArcGIS 9.3.1 related to calculating runoff? –  user22349 Sep 26 '13 at 5:32
    
It sounds like you are asking a separate question, which would be better posted as a new question. It will be easier for people to find it, and potentially help you. –  Get Spatial Sep 26 '13 at 6:10
    
If you have a new question, please ask it by clicking the Ask Question button. Include a link to this question if it helps provide context. –  PolyGeo Sep 26 '13 at 6:40
    
This does not provide an answer to the question. To critique or request clarification from an author, leave a comment below their post - you can always comment on your own posts, and once you have sufficient reputation you will be able to comment on any post. –  Devdatta Tengshe Sep 26 '13 at 9:12
add comment

5 Answers

up vote 3 down vote accepted

Yes, I would use ArcHydro. I found a document on this page a while ago, that outlines some possible workflows (from the ArcHydro Team). There have been some changes compared to ArcMap 10.0 so for me it was quite useful.

share|improve this answer
add comment

If you want to calculate streamflow from rainfall/precipitation events, a hydrological model is needed. HEC-HMS is a good & not that complicated model. You can use HEC-GeoHMS (addon for ArcGIS) to generate most of the inputs for HEC-HMS. A very good tutorial for both HEC-HMS & HEC-GeoHMS can be found here

http://web.ics.purdue.edu/~vmerwade/tutorial.html

share|improve this answer
add comment

You should look into the Soil Water Assessment Tool (SWAT) for this type of analysis. It really depends on the soil types in your area along with temperature and topography. There are simpler ways to approximate your runoff (USLE method or the rational method), however it would be better if you could get more information.

http://swat.tamu.edu/

Good luck!

share|improve this answer
add comment

Tools in the TauDEM toolbox (http://hydrology.usu.edu/taudem/taudem5/index.html) can be used for (parts of) such an analysis. A basic analysis may invlove the following steps:

  • creating a DEM without/with few sinks
  • finding steepest path from any cell in the DEM
  • for each cell, finding how many contributing cells there are
  • setting a cut-off for defing what (in terms of contributing cells) a stream is
  • if needed, change "stream pixels" to vector lines
  • if needed, find the contributing area to each stream at an interesting point (e.g. crossing of a road, railway line, ...)

The TauDEM tools are available for ArcGIS 9.3.1 and 10. Although I don't think 10.1 is mentioned on the web-page, I run it under ArcGIS 10.1. Pay attention to the installation instructions!

The HEC-HMS modeling system (mentioned by samphilips) gives you more advanced tools than this, but requires non-GIS work. The software can be found here: http://www.hec.usace.army.mil/software/hec-hms/.

share|improve this answer
add comment

I was told by a fellow GIS professional with extensive watershed analysis experience in the Pacific Northwest that ArcHydro was developed more from an engineering stand point and not so much of a natural resources stand point. I have never been able to find any documentation about this however. Anyone else? This was back when v1.1 from the U. Of Texas was the module in use so perhaps that was the case but the tools may have morphed over time/ versions?

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.