1
vote
0answers
15 views

Concurrency and lock challenge in Nonversioned editing in ArcMap

I use a non version SQLServer geodatabse with geometry type for spatial data storing.To do so,I have registered all layers in SDE repository and geodatabase and ArcMap shows all layers and edit them ...
3
votes
0answers
23 views

Are there any free live traffic layers for ArcGIS 9.3 MXD out there?

I am looking for free live traffic layers for a ArcGIS 9.3 MXD. My searches haven't been that successful.
3
votes
2answers
44 views

Calculating flowpaths downstream of a point

I am assessing the flood risk posed by pipeline failure. I need to calculate the likely flow-paths for flood water downstream of critical locations along the pipeline using GIS. I'm familiar with ...
1
vote
2answers
52 views

Dissolve tool misses out two polygons

I'm trying to dissolve polygons based on a code number in the attribute table. It all works well, with an exception of two polygons that fail to dissolve - they literally drop out from the output. It ...
1
vote
1answer
35 views

Clump and eliminate classes in a raster in ArcMap or R

after interpolation of sediment classes, I obtained a raster which looks like the image below (sample of the river). I would like to clump and eliminate areas within the raster that are below a ...
1
vote
0answers
21 views

Migrating ArcView GIS *.apr to ArcMap application of ArcGIS Desktop 9.3?

I have a lot of arcview .apr file. I need to open & edit in ArcMap 9.3, but the original project file is saved in .apr. I tried to use "import from arcview project". The project file can be open ...
1
vote
1answer
25 views

Intersecting two shapefiles from different folders based on their name using scripting in ArcGIS Desktop?

How can i script for intersecting the two shape files from two different folders based on their names? i have two folders which contains the shape files with same name i want to intersect the ...
1
vote
1answer
38 views

How to convert Geographic wgs-84 to lambert (LCC_wgs 84 projection for a vector file?

I have one shape file with Geographic wgs-84 projection but i need to calculate geometry for that I tried to convert it into UTM projection system. As my data is of whole country so I can't give one ...
1
vote
1answer
57 views

Calculating Field B from Field A, except where Field B has existing value, using ArcGIS Desktop 9.3?

Im trying to calculate Field B from Field A except where Field B has existing value in ArcGIS Desktop 9.3. (I suspect its straight forward but I have 'searched' and havent cracked it yet) Any ...
2
votes
3answers
49 views

How to increase raster extent by filling extent with no data using ArcGIS Desktop without Spatial Analyst?

I am using feature to raster to rasterize water polygons. It only makes a raster the extent of the features in the polygons, whereas I would like it to be the extent of another existing .tif image. ...
1
vote
4answers
43 views

How to split polygons at intersections in ArcGIS 9.3?

I have two polygon layers. I'd like to split the features in one based on where they intersect the other layer. I've tried using the Clip tool, but there is no option to simply split the features -- ...
0
votes
1answer
45 views

Problems Joining CSV to Shpfile arcgis 9.3

So I have been trying to get this to work all day and have had no success. I am attempting to join a CSV file with a Shapefile. The CSV is from the Hud's location affordability portal ...
0
votes
1answer
56 views

How do I overcome this problem of converting a raster layer to polygon form?

I am trying to convert a raster layer of U.S. climatic regions into polygon format using ArcMap 9.3 under Windows XP. The original data are to be found at the following address: Koppen Climate ...
3
votes
1answer
63 views

How can I create a constant slope DEM?

I wanted to create a DEM of constant slope say 1/3000. How can I proceed in ArcGIS 9.3? The area may be 1000m x 1000m or any other as per convenience.
1
vote
1answer
42 views

Is there a way to automatically select a feature when another feature in a different layer shares attribute data?

I have a mapset displaying foraging areas, each with a unique ID. I spatially joined the mapbooks layer, so each mapbook sheet identifies the foraging area it is depicting (1:1), so sheet 5 is ...
0
votes
1answer
29 views

Contouring surface with barriers?

I'm using ArcGIS Desktop 9.3, and I want to contour a surface with barriers. Every time the result is a polyline contour shape file which covers only a part of the surface not the whole surface. ...
1
vote
1answer
284 views

How to convert MXD to DWG File

I have been trying to export from MXD format to DWG format without much success. I used the Export to CAD conversion tool in GIS 9.3 but it only converts the lines and polygon.. etc to DWG format and ...
2
votes
0answers
28 views

Extracting outtermost points from a irregular grid of points

Good day to all, I am using Arcmap 9.3, and would like to remove all points inside an irregularly placed grid, except the outermost (boundary) points. For example, I would like to keep the black ...
0
votes
0answers
14 views

OSM exports at different scale to what is on screen

I am using ArcGIS 9.3.1 I have added OSM as a WMS layer. I have a map set up how I want it to look in the layout view. When I go to export the map, whether as an image file, or in AI, which is the ...
1
vote
2answers
122 views

How to fix shape file projections

I have a project with several shape files. The files overlapping however. I have to go to unusable extents to even see the file on the same screen. I have tried using to project to as suggested here ...
2
votes
1answer
124 views

Why is shapefile not drawing in expected location after (or before) using Define Projection tool? [duplicate]

I have downloaded this zipped shapefile of bus routes from the City of Houston data portal. I then performed these steps in ArcGIS Desktop 9.3.1: Extracted the shapefile from the *.zip Added this ...
0
votes
0answers
16 views

Problem with full extent after using python code [duplicate]

I delete my previous post on the same topic because it was not clear. I made a python code for ArcGIS 9.3 which : copy a shapefile every feature in the shapefile are shift for an x and an y given. ...
2
votes
1answer
176 views

Get a Shapefile Geometry Type

I am making a python code for Arcgis9.3. In this code I have an input feature and I create a Output feature. I want that the output feature is the same geometry type as the input feature. At the ...
1
vote
1answer
145 views

How to split circles in 8 quadrants

I am using ArcGis 9.3 and I need to split a large number of circles in quadrants. The circles corresponde to a 200m buffer of a point layer and, for each point, I need to split the buffer in 8 ...
0
votes
1answer
31 views

Converting NAD27 geographic to grid

I have a series of lat/long coordinates in NAD27 that i need to convert to NAD27 zone 17n eastings/northings. I have ARCGIS 9.3 but no direct and reliable means for the transformation. Any ideas?
0
votes
1answer
61 views

problem in spline with barriers in ArcGIS 9.3?

I am trying to use the script tool "Spline with Barriers" from arcgis 9.3 3D Analyst toolboxes. I am not getting expected output. The output is just only one value over the surface. We are using ...
2
votes
0answers
37 views

differentiating stone houses from barren rock in ArcGIS 9.3

I'm working in ArcGIS 9.3 trying to differentiate stone houses (often red brick roofs) from barren rock in a typical Mediterranean karst region via remote sensing. I have been using Landsat imagery. I ...
0
votes
1answer
57 views

How to determine stream elevation points from SRTM raster with stream lines vector?

I should determine elevation points of some streams. I have SRTM raster and stream vectors. Which tools can solve this problem in ArcGIS 9.3? Anybody can write me a workflow how to do this task? ...
1
vote
1answer
63 views

Problem with Intersect_Analysis : too long path? [closed]

I made a python code for Arcgis 9.3. to intersect 2 features. The problem is that code works when the files are on my desktop (for example) but not when they are in a long path on another disc. Here ...
1
vote
2answers
107 views

How to select island polygons witin the same polygon layer?

i have a dataset containing many polygons. In this dataset some polygons have other polygons (as a donut) inside of them. So those island polgons are contained by only one polygon but it originated ...
0
votes
0answers
28 views

calculate distances between different components in a (cable-) network

I have to calculate all distances between every different components in a cable network (for example the distance between an amplifier and a modem) and have to show the results in a diagram (frequency ...
1
vote
1answer
148 views

How to get Z attribute of point using Python and ArcGIS Desktop 9.3?

I am making a python code for arcgis 9.3. In this code i create a new point with x,y and z attributes as following : rowsLine = gp.updatecursor(line_Feature_Class) rowLine = rowsLine.next() ...
2
votes
1answer
88 views

How to Format Description when writing Help for Python script tool?

I try to format the description in script tool but I don't know how it works so i don't manage to add a line break for example. Does it works with HTML tags ? When editing my script the description ...
0
votes
0answers
1k views

How to install ArcGIS Desktop 9.3 on Windows 8 (64 bit)?

I have installed Arc GIS 9.3 on window 8, 64 bit but the lisence server says not valid license server or the older version is running how can I solve such like problems?
0
votes
0answers
35 views

ArcGIS 9.3 Export network dataset from geodatabase

I've got a set of feature classes with network dataset in a geodatabase *.gdb format and would like to export out to *.nds format, may I know how to do that on ArcGIS/ArcCatalog ?
1
vote
1answer
70 views

How to add an independent panel in the ArcMap layout view?

In ArcMap 9.3, I want to make a map in which I start from a wider location (for example, a country) and then, I give some zooms until one specific area. I have all the data I need: country ...
0
votes
1answer
302 views

How to Calculate Area in Raster data in Arcgis 9.3

I run Supervised Classification on Spot image and now how to claculate The Area of different classes with out converting To shape file . because converting to polygon create too much polygon which is ...
0
votes
1answer
26 views

How to find annotation overlaping file in arcmap 9.3?

I have all my textstring(Annotation) at distance 1.5 feet? I want to find all the annotation which at distnce less than 1.5? Also want to find the overlapping file? Can I make any file like shape file ...
3
votes
2answers
416 views

Georeferenced TIF files, can TFW files be created from TFWX files? - (ArcGIS 9.3)

I have georeferenced some image TIF files in ArcGIS 9.3. Update Georeferencing creates a *.TFWX file. Renaming to *TFW file does not place the image in the correct spatial location for software ...
5
votes
1answer
321 views

Can conversion of MapInfo WOR to ArcGIS MXD preserve styles and coordinate systems?

Is there any ways to migrate from MapInfo's data with WOR project file to ArcGIS MXD project file without leaving all styles and coordinate system? I know that I can convert from TAB files to SHP ...
1
vote
0answers
36 views

How to Symbolize by creating tables containing different values (items) and with particular colors?

I work with ArcGIS Desktop 9.3. I want to illustrate my data for water sampling at different points in streams. I would like to illustrate a chart or a board for each point that would countain more ...
0
votes
0answers
35 views

classify lines in shapefile by distance to other lines in same shapefile

I'm using ArcGIS 9.3 (and have XTools Pro). I need to classify each line in a shapefile by how close it is to other lines in the shapefile (ie less than 475 ft, less than 450 ft, less than 425 ft) ...
3
votes
4answers
228 views

Converting KML files to shapefiles ArcView license level of ArcGIS for Desktop?

I only have an ArcView 9.3 license at work. What's the best way to convert a large KML file to SHP format? I tried the DNRGarmin tool to import, but the file was too large for that particular ...
1
vote
1answer
80 views

How to edit existing PMF file using ArcGIS Publisher?

I downloaded a trial version of ArcGIS Publisher and the second question on this page suggests that editing is possible in addition to creating PMFs: Can I edit a PMF with ArcReader? No, ...
0
votes
0answers
19 views

Hawths tools grid labelling

I want to label the grid cells which I create with Hawths Tools in Arcgis 9.3 horizontally instead of vertically. To explain a little more: The program labels the grid cells like this as default: ...
1
vote
1answer
70 views

Find areas of overlap [duplicate]

Apologies if this question has been asked (I suspect it has or is so simple that people havent needed to ask it) but I am extremely inexperienced with GIS software and need it to find out some ...
2
votes
2answers
67 views

How to select part of the polygon

I have a shapefile of the country. I need to select only percentage of that polygon for demonstration purposes. As an example, how to select 60% of polygon? I am using ArcGIS 9.3.
0
votes
0answers
100 views

How to install ArcGIS License Manager 9.3 silently?

Is there a way to install ArcGIS License Manager 9.3 silently (by using only command line)? (in windows environment xp/7).
2
votes
3answers
368 views

How to Add Basemap from ArcGIS Online to ArcMap 9.3? [closed]

I want to load a basemap into ArcMap 9.3 using "Add Data from ArcGIS Online" tools. Does anyone know the URL needed to load it?
4
votes
1answer
291 views

How to calculate total number of data cells in raster?

I am using ArcGIS 9.3 and python 2.5. My code is shown at the bottom of this post. I have a raster containing fire intensity information at 200m cell resolution. I run the script and the first count ...