# Tagged Questions

52 views

### Arithmetic on rasters with variable names in Map Algebra/Spatial Analyst?

I'm a Python (and StackExchange) novice trying to figure out how to perform calculations on temporary rasters with variable names. My attempt at a minimum working example is below, but I would ...
21 views

### Error issues when using Cut Fill operation in ArcGis 10.2

I wonder if someone is able to assist with an issue I have about a series of errors I get when using the cut/fill tool in spatial analyst, ArcGis 10.2? Someone posted a question sometime last year ...
65 views

### Zonal Statistics as Table Tool

I have a slope dataset. I have a polygon shapefile with territory within the extent of the slope map. I have to calculate the real surface area of this shapefile using the zonal statistics as table ...
81 views

### Calculating real surface area using Zonal Statistics as Table Tool?

I have a slope dataset. I have a polygon shapefile with territory within the extent of the slope map. how do I calculate the real surface area of this shapefile using the zonal statistics as table ...
26 views

### ArcMap - proportion of polygon in lon/lat grid cells

I have a polygon representing a river basin on a 1 X 1 degree lat/lon grid. I need to create a boundary using the grid cells as the boundary to best represent the outline of the basin. I would like to ...
32 views

### Error with the Contour (Spatial Analyst) tool in ArcGIS

I am having an issue with the Contour (Spatial Analyst) tool in ArcGIS. When I manually run the tool in ArcToolbox, it will sometimes say that the tool has failed, giving the following error message: ...
17 views

### How to Krige with expectation of 0

I am trying to Krige in ArcGIS from point samples of a chemical concentration. Towards the center, most of the points are larger, and on the periphery, all of the points are 0. The generated raster ...
121 views

### calculating zonal statistics of raster data in multiple overlapping zones and combining them into one table

The aim here is to calculate the max, min, mean, range, sum, count and std of raster data contained in areas delimited by polygons (much like what the Zonal Statistics as a Table tool from Spatial ...
35 views

### Feature Distance for each Raster Cell

I have a polyline layer of roads and a raster of land ownership. For each raster cell I would like to calculate the distance to the nearest road. I am on ArcMap 10.2 with Spatial Analyst and 3D ...
29 views

### Raster data with no values (ArcGIS)

Used a DEM raster and then used the extract-by-mask feature to shrink it to the shp file I'm working with. However, when I try to get unique values, it gives me the following error message: "The ...
44 views

### Choosing appropriate Interpolation Tool

I am interested in doing some fairly simple interpolation work in the next few weeks using ArcGIS 10.1. However, I am unsure about which interpolation tool is most appropriate for the task at hand. ...
57 views

### How can I create a constant slope DEM?

I wanted to create a DEM of constant slope say 1/3000. How can I proceed in ArcGIS 9.3? The area may be 1000m x 1000m or any other as per convenience.
28 views

### Trying to combine 29 zip code service areas into 10 or fewer service areas

I am tasked with coming up with 10 or fewer zip code service areas based on 29 pre-existing zip code service areas. The zip codes cover 5 counties and many service areas, obviously, overlap. The ...
45 views

### Why is my spatial join count 0 in ArcGIS Desktop?

In arcMap, I have a list of locations with lat/long. From a previous post, I learned about the Spatial Join tool to determine the amount of joins that I have. I tried to use the tool with my states ...
58 views

### What is GDAL equivalent to ArcGIS Lookup (Spatial Analyst) tool?

I use the Lookup (Spatial Analyst) tool to create several raster layers from a combined raster layer. I know ArcPy can do the same thing. However, I would like to know whether GDAL (or another ...
78 views

### How to extract NetCDF raster values to time enabled shapefiles?

Does anyone know a good way to extract NetCDF raster values to each data point from a time enabled shapefile at the correct time? I have tried using a python script tool and a loop that steps ...
97 views

### Extracting NetCDF raster values to time enabled shapefiles - what's wrong with my python script?

I'm trying to make a python script tool that extracts the values from a NetCDF raster to each data point from a time enabled shapefile at the correct time. My NetCDF raster consists of monthly sea ...
46 views

### Compare slopes between adjoining line segments

Using a DEM, I assigned slope values to individual segments in a street network feature class. In some areas the slope values seem suspect, such as where a highway overpasses a local road. Is there a ...
26 views

### Contouring surface with barriers?

I'm using ArcGIS Desktop 9.3, and I want to contour a surface with barriers. Every time the result is a polyline contour shape file which covers only a part of the surface not the whole surface. ...
46 views

### How do I create zones using location features? [closed]

I have a list of rock art sites with a recording of every image within each site. For example, Site 1 has 4 kudu, 1 lion, 3 males and a locust; Site 2 has 2 leopards, 1 elephant and 3 giraffes; Site 3 ...
25 views

### ExtractByMask with one mask and multiple layers ArcMap

I have a multiple cost distance rasters and multiple feature layers. I need to find and join the feature layers (or associated shapefiles) that lie within a threshold of costs on the cost rasters. For ...
30 views

### Aggregate the raster from the Combine Tool in Spatial Analyst--->Local

I have a raster file created through the Combine tool (Spatial Analyst--->Local). The attribute table is showed below. Its resolution is roughly 10m. I would like to aggregate it to 50m with each ...
80 views

### Open source, Python option for Arcpy's Con tool?

I'm wondering if there is a method to perform a function similar to Arc's Con tool, using open source options in python. I have two rasters, one that shows locations of clouds and the other is just a ...
75 views

### Identifying clusters of points within a given distance

So I have a database of lats/longs representing incidents occurring on or near roadways. My goal is to identify the street block areas with the highest number of incidents in the database. I don't ...
41 views

### Z values all equal 0

I have just posted a similar question, but I solved part of it, however it has now lead to a new problem. I have a point layer, and have got the x,y and z coordinates from 'extract values to ...
35 views

### Can't save result of “Extract Values to Points (Spatial Analyst)” inside the working feature dataset!

I have a file geodatabase in which I have a feature dataset. I have some feature classes inside the feature dataset. I wonder why when I attempt to save the result of Extract Values to Points (Spatial ...
29 views

### Errors while running Region Group tool

I am getting an error while using Region Group on a large dataset. The errors are specified below: ERROR 999999: Error executing function. The table was not found. [VAT_final002] A column was ...
56 views

### Avoid NoData after Focal Statistics Majority

I am currently working with some classified land cover rasters (containing 8 land cover classes) in ArcGIS 10.0. I would like to make them look smoother and have therefore used the Focal Statistics ...
64 views

### Habitat fragmentation tool error

I am trying to calculate the habitat fragmentation of a forested region in Africa in order to protect the areas less fragmented. I have used the tool "Landscape Fragmentation Tool V2 requiring Spatial ...
93 views

### ArcGIS 10.1 calculating area out of Aspects

I have used the aspect tool to visualize the 8(+ Flat) slopes of the different directions, now I would like to get the numbers of the areas for each different direction (+Flat). Anybody knows how that ...
201 views

### Is Clip (Data management) or Extract By Mask (Spatial Analyst) more efficient?

I'm trying to clip down an Orthophoto to a county boundary. I've been using the Extract By Mask Tool, but this process has been running for about 12 hours! It's gone through 2 cycles already, so I'm ...
42 views

### Using floating point raster image for majority filter in ArcGIS?

I'm trying to do filter images using Majority filter in ArcGIS. My input images is a float point raster image in .img format. There is an error saying "Invalid parameters". What does it mean?
64 views

### Script to “extract by mask” a list of raster files

I'm trying to mask a group of raster files and save the new rasters in a different folder using the same name of the original files. It doesn't sound as a difficult task, but I'm having trouble ...
82 views

### How to export raster value into excel or ASCII [duplicate]

I'd like to get all pixel values of time series NDVI image to find regression coefficient to smooth the abnormal NDVI value through the time. So that firstly, I want to export values of raster into ...
56 views

### Is there any method to choose the value of each pixel according to land cover

I have 2 images; one is land cover image (imgA) and monthly mean temperature image (imgB). I'd like to choose value of each pixel from imgB corresponding to imgA. WhaT I expected is each pixel of ...
44 views

### What does “unsupported bin funcion type” error in ERDAS mean?

I want to open a set of .img files in ERDAS which are output files of zonal statistic function in ARCGIS. Before running the function, all images can be opened in ERDAS. After calculating zonal mean, ...
103 views

### Expand raster extent and set expanded values using nearest neighbor sampling

I have run a hydrodynamic model which has given me a grid of surface elevations throughout a bay. I am trying to process the results in ArcMap (or QGIS if needed). My goal is to take the current grid ...
24 views

### slope in model different value than slope in stand alone script [duplicate]

When running slope(analysis) from model I receive a high value of somewhere around 71. After then exporting model as python snippet and changing only the output raster name (using same input raster) I ...
100 views

### How to create graph out of two layers using ArcGIS 10.1 for Desktop?

I would like to create a graph of two layers I have. on one hand its the land price of a certain area and on the other a layer with a crime rate. first of all, the layer with the land prices doesnt ...
24 views

### How to modify extent (layer) for Fuzzy Membership analysis?

When applying the Fuzzy Membership, how do I modify the extent (layer) to which it is applied? I don't mean showing the extent, but changing the values (mid point & spread) to a different layer? ...
195 views

### Calculate Slope of Street Segments

Using a DEM, I need to assign slope to individual segments in a street centerline feature class. It will be used to account for increased travel time for steep slopes in a network analysis. I am ...
29 views

### Find Distance within each Raster contiguous cell block

I was asked to find for each Individual Contiguous Forest Block the distances INSIDE of each where it would be the farthest (aka the most isolated) from each forest cell block's respective edges. I ...
44 views

### How to get neighborhood values count using a geoprocessing tool in ArcGIS?

I have a raster (black=0, red=1, and white=NoData). I am wondering if there is any tool in arcgis which can help me only count number of 0s and 1s separately in a 3*3 neighborhood. I need an attribute ...
157 views

### Do SAS Bridge to Esri and SAS/GIS extensions add value to Spatial Analyst and Spatial Statistics?

My organization uses SAS extensively, but has been increasing GIS use and capacity recently (that's why they hired me). I was asked to evaluate the two SAS GIS extensions Bridge to Esri and SAS/GIS. ...
80 views

### Labelling Kriging result (contour)

I've finished Kriging, creating a contour-map, representing groundwater-height in my area. By a reason I don't know, it isn't possible to label my results. Neither can i export my data to vectors ...
208 views

### how to choose stratified random sample on multispectral image

I'd like to choose random samples from multispectral image according to each Land Cover image. The multiband image has 70 bands representing land surface temperature data from MODIS. Land cover image ...
21 views

### How do you distribute values evenly within zones when converting polygon to raster?

I'm trying to convert a (traffic analysis zone) TAZ polygon to raster so that the population values are evenly distributed within each zone. So far, when converting the TAZ polygon, the same ...
210 views

### Watershed delineation; how to program

I've been trying to roll my own watershed delineation program, taking a flow direction grid and pour points as input. I coded up a quick search algorithm in Python which inspects the flow direction ...