1
vote
1answer
19 views

Eliminate 0 Values From Raster

Arcgis 10.2 I currently have a raster file that I want to turn into a set of polygons. This will help me to create specific buffers around certain points. The extent of my values are 0, and 1. When I ...
2
votes
0answers
12 views

How to normalize multiple PNG rasters with differing colormaps

I have a series of adjacent rasters which comprise a digital elevation model. Unfortunately they have been given to me as PNG files, rather than Esri Grids. The only key that I have to the actual ...
0
votes
2answers
38 views

Find the minimum elevation pixels from an elevation raster using arcpy

I want to create a python script to find the minimum elevation pixels from an elevation raster (aster,srtm) using arcpy and arcmap 10.1. The purpose is to reclassify these pixels. I have tried but I ...
2
votes
1answer
50 views

Cell Size of Raster Explained

I'm not quite understanding the cell size values that a given raster has. I been doing some kriging interpolation on some very dense point data and if I leave the cell size parameter blank, it's cell ...
2
votes
1answer
24 views

Polyline frequency to raster

I have some animal tracking data in the form of a polyline shapefile and want to convert this to a raster so that each pixel is given a value of 1 for every instance in which a line crosses it. I've ...
0
votes
0answers
29 views

How do I select specific colors within a raster to create polygons with in QGIS or ArcMap?

We have a few georeferenced zoning map rasters and would like to convert specific zones (colors) to polygons, sometimes multiple zones as different polygons. Our workflow has been in the past to ...
1
vote
2answers
97 views

How do I open images georeferenced in ArcMap in QGIS? (.aux.xml)

We have several ArcMap georeferenced images (raster datasets) that we are attempting to open in QGIS without any luck. These are not inside of a geodatabase and are not Arcinfo Binary Grid format or ...
0
votes
0answers
11 views

Raster images at edge of data frame not displaying. How can I prevent then from disapearing?

I have a series of satellite images and as I pan or zoom, the images near the edges of the data frame the stop being displayed leaving small areas with no imagery. It is seems to occur when only ...
2
votes
2answers
64 views

How to extract one band from a three band raster in ArcMap?

I'm fairly new to ArcGIS and I get into trouble extracting a single band layer from a raster image .img in ArcMap that I want to use after in zonal statistics. So far, all help I found is to do the ...
1
vote
3answers
60 views

Greyscale Raster (tif) in ArcMap

I've searched all over google and have found nothing. I want some tiff files I have in ArcMap to be in greyscale with the rest of the layers in colour, similar to the style override > greyscale option ...
2
votes
0answers
84 views

Why does Topo to raster tool stall in ArcMap 10.1?

I'm having the following problem - An 8 mile by 4 mile set of 2 foot contours. Whenever I start the topo to raster tool, I get a constant loop of the tool running. And running, and running, and ...
0
votes
0answers
14 views

Abnormal DEM values after fill operation

With arcmap 10.1. after filling the DEM the value range is -70 to 1078, but it should be between 225 to 1200. Can anyone suggest me a methodology or the necessary steps in arcgis 10.1 to mend my ...
2
votes
1answer
58 views

Raster clipping over 1300 km2 orthophotos

I have all of Denmark in 25 cm orthophotos added to my ArcMap (mosaic dataset). I've added a polygon of an area covering over 1300 km2. I've used the raster clip tool to clip the data into a new ...
1
vote
1answer
103 views

How to create attribute table for raster data?

I have raster dataset for rainfall but its not having attribute table. How can I create tabular data using the same raster file? How to join it back again to it? Software used is ArcMap 10.1.
1
vote
1answer
145 views

ArcMap Raster to NetCDF - lat/long

I need to convert a few files which are projected in WGS84 into netCDF. NetCDF requires lat/long. I am a bit confused on how the process is handled by ArcMap especially after looking at the online ...
1
vote
0answers
25 views

Sending Raster File in ArcMap, Attributes Gone

On my computer, I opened a .tif file in ArcMap 10.1 and reclassed the values into two categories - this results in a new file. I then send that file to another computer and open it in ArcMap but ...
3
votes
2answers
142 views

How to solve jpeg2000, jp2. crash & errors on arcgis 9.3.1 windows 7 64-bit

I have several problems at work. One is that jpeg2000 crashes ArcMap but mostly ArcCatalog when trying to read them. This is only occurs on machines with Windows 7 64-bit (we don't have Windows 7 ...
3
votes
1answer
821 views

creating a buffer in a raster layer

I've got a raster layer separated into 3 zones, representative of marine park zones. What i'm trying to do is make it so that where zone 1 is adjacent to zone 3, there is a "buffer" between them, of ...
3
votes
1answer
419 views

ArcGIS - make linear regression across multiple raster layers

I have a series of 5 rasters which represent a value for 5 consecutive years. Is there a way to create a linear regression for each cell over the 5 layers and output the slope? The result would be a ...
1
vote
1answer
84 views

Spliting layers from multispectral images

I have an image with 4 bands and I wanted to De-layer stack to have each bands separately. How and with which software I can do that? Thanks
0
votes
0answers
24 views

Assign value to raster cells within masked area [duplicate]

The answer I previously received for this question did not solve my problem...please keep in mind that I am a GIS beginner, and it's quite likely that I carried out the proposed solution (using ...
1
vote
1answer
81 views

Calculating Volume of Reservoir using python and ArcMap10? [duplicate]

I have a raster file with different water depth in each cell. I am using Aster DEM so my resolution of that file is 30m by 30m. Now I want to calculate the total volume in that area by multiplying ...
6
votes
3answers
796 views

How to efficiently read and reclassify many rasters in R

I've been tasked to create a suitability analysis of wave conditions in the Gulf of Mexico. I have 2 thousand or so raster files that are about 8 MB each (2438 columns, 1749 rows, 1km cell size). ...
0
votes
2answers
687 views

How to delete isolated pixels in ArcGIS 10.1?

I want to know that it is possible or not to edit the raster pixel in ArcGIS. I want to delete isolated pixel and I want to delete some pixel by manually. please tell me how can i do it manually or ...
2
votes
1answer
291 views

Create raster distance around a single point feature class

Okay, so I'm relatively new to ArcMap and I'm trying to use the Fuzzy membership for suitability test. I have a single point feature class that I want to use for this analysis. I know that in order to ...
1
vote
0answers
130 views

ArcGIS opposite to pivot table

fellow GIS-ers :)! I've been trying to find a tool to do the opposite to what the "pivot table" tool does but I dont thin there is any tools for that. I have a raster data set derived from Landsat ...
2
votes
1answer
1k views

What are the units of the calculated area from a raster in decimal degree

I'm trying to calculate area for a raster file which contains 2 layers (0 for unsuitable habitat and 1 for suitable). It's been calculated successfully but I don't know what is the unit of the ...
2
votes
1answer
228 views

Raster as Attribute Field Error

I'm using Arc 10.1. I am creating a parcel inventory where I would like to have a photo of the property attached as an attribute and view-able with an HTML popup. I have a polygon feature class built ...
3
votes
1answer
245 views

Extract multi values to point error

I am trying to extract values from my rasters : slope, aspect, landcover etc. for my animals group locations. I used Spatial analyst>Extract multi values to points but when I look in my attribute ...
1
vote
0answers
84 views

Creating Raster with values based on function output

I have a function that calculates a price based on the input slope and distance. I want to write the price to a raster as the rastervalue. How do I do that? OpenSource and ArcMap solutions would work. ...
0
votes
2answers
175 views

Make a “Shaded Area Polygon” from HILLSHADE raster in ArcInfo 9.3

How am I suppose to extract the values ( Value<=100 ) from this HILLSHADE raster, and then make the extracted values as a VECTOR POLYGON (shapefile) ---I'm using ArcGIS 9.3 (ArcInfo with all ...
3
votes
0answers
176 views

Can ArcGIS handle missing values to create a contour map?

I am trying to create a contour map for a waterbody. It turns out that in several locations there is no data. I just don't want to use the missing values as zero in ArcGIS because it would create ...
2
votes
1answer
77 views

Displaying raster attributes on data driven pages

I have a feature class of 50 properties that are ranked. I have a photo for each property stored in a raster attribute column (in the feature class) called "Picture". I am trying to create a Dynamic ...
2
votes
1answer
74 views

How to visualize the water equivalent between two raster layers in arcmap 10.1?

I do have two raster layers (interpolated with Empirical Bayesian Kriging), that show the elevation of a glacier in April, and September. I want to show the change in elevation between the layers in ...
2
votes
0answers
65 views

Cubist Add-In for ArcMap

I'm looking for an ArcMap add-in that will create a raster based on rules from RuleQuest Research's Cubist .model files. Ideally, the add-in will give the user the option of matching input raster data ...
5
votes
1answer
142 views

Getting ArcMap to display rasters properly first time

This is a very basic question, but as I've self-taught most of my GIS skills this is still a gap in my knowledge. When I load a .tif raster into ArcMap, most of the time it requires re-exporting to ...
4
votes
2answers
621 views

Annoying little line in color ramp legends - how do I remove it?

This was never a problem with ArcGIS 9 but it appears that in 10.0 Esri has added small horizontal lines as the default when including color ramps in legends. I want to get rid of these annoying ...
2
votes
1answer
197 views

Raster Analysis - Identifying features from Raster

I have an IDW, tension spline and hill-shade rasters that show an archaeological landscape and from these rasters I want to identify new features which are seen in the landscape as depressions. And ...
6
votes
1answer
2k views

ArcMap 10 - Extract raster cells from imagery based on RGB value

I've got some aerial photography (format: IMAGINE Image) which is detailed enough to see to fire hydrants and a shapefile of fire hydrants which was digitized based on some CAD data. My project is to ...
3
votes
1answer
304 views

Problem editing raster and saving with projection and transformation intact

I am trying to make a custom tool to Arcmap using Python. It is supposed to read in a raster DEM, a point shape file and a distance, and output another raster. The output raster should be ...
2
votes
3answers
664 views

Zonal Statistics as table creates output but some are Null

Here is my newest issue: I have temperature as a raster file and different ecoregions of a province as polygons. What I want to do is calculate the mean temperature per ecoregion. I succeeded in ...
10
votes
3answers
2k views

How can I mosaic images in ArcMap without it affecting the colour?

This is 4 images (NE, SE, NW, SW) sections of imagery. They have some overlap between them. Working with 1m 3-band orthoimagery. Different parts are sometime flown at different times/sources hence ...
13
votes
3answers
506 views

How to count consecutive pixel values for a set of rasters?

All, I'm using ArcGIS 10 with Spatial Analyst. I have a set of rasters (8 in total) that only every contain a 1 or a 0 for each cell. Each raster represents a different years worth of data. For ...
6
votes
3answers
2k views

ArcGIS Export Selected Raster Graphics

I'm having a problem exporting raster graphics using ArcGIS 10. It seems simple enough, but for some reason I cannot get ArcMap to work with me. Here are my steps: Add a raster to ArcMap Open the ...
4
votes
1answer
1k views

calculate building density in ArcMap

I have two questions related to calculate building density. I need to calculate the building density in a map which Data is in shape format. The buildings and the area are in two different layers. ...
4
votes
1answer
1k views

ArcMap, Make Grids and Graticules Layer example

I'm trying to use the Make Grids and Graticules Layer tool in ArcMap (have a ArcInfo license). I'm looking for a basic example like in North America. eg. 1.)Start with empty map 2.) Set data ...
1
vote
1answer
1k views

How can I extract raster values around points?

I'm using ArcMap 10. I have a point dataset and a .flt raster. For each point I want the sum of the raster values that lie within a certain radius of each point. i.e. I want to extract values within a ...
2
votes
0answers
94 views

raster data expressed as percent

I downloaded NDVI greeness data from the USGS Integrated Vegetation Mapping Viewer. In the metadata it says that visual greenness values range from 0 to 100. My data is from the period ending 3/5/12 ...
2
votes
2answers
1k views

Raster Combine - ESRI Spatial Analyst

I am trying to combine a whole bunch of rasters with Esri Spatial Analyst. Seems to be doing what I want EXCEPT the calculated output is only the area where all 4 rasters overlap. I am a complete ...
2
votes
1answer
2k views

Why is ArcGIS crashing when I try to load .adf raster data?

I am pretty new to GIS, so forgive me if this is a stupid question. I downloaded a bunch of land cover files from USGS seamless warehouse of Florida. Every time I try to 1) view the .adf file (which ...