A 3D geovisualization software package by ESRI

learn more… | top users | synonyms

1
vote
0answers
16 views

Buildings missing texture in 3d web scene exported from ArcScene

A random sampling of buildings are missing textures. The models were made in Sketchup 8 and exported to COLLADA, then dropped in ArcScene. All of the textures are .jpg files. The models look fine in ...
0
votes
1answer
370 views

Extrude Inclined 3D Boreholes

I need to extrude the 3D Borewell data using the inclined angle in ArcScene. I've seen only the options for extruding them in one direction(i.e., perpendicular downwards or upwards). I got point data ...
1
vote
0answers
12 views

what is the output coordinate system when I use Near3D tool in ArcScene?

I added a 3D rectangular surface (rectangle formed by 3D points) and a 3D point as two different shapefiles and then I tried to use Near3D tool. Then it gives an error "Datum conflict between input ...
0
votes
1answer
123 views

Extrude Between Tool not working for me

I am having an issue with trying to use the extrude between tool in ArcScene. I had 8-9 geologic formations that I would like to create a 3d polygon of these formations. My workflow process went ...
1
vote
1answer
242 views

3d borehole view for ArcScene

I am trying to make a 3D Representation on the well from the following data. I cnat put it in a table work from there and use python. Just not sure the math. Anyone Help I do have the starting ...
1
vote
0answers
28 views

Arcscene export issue: only upper layer showing up

I have created a 3d visualization with ArcScene 10.1. I have 1 hillshade of a portion of an area, which take elevation ifno from DEM of the same area. Also, the DEM is coloured and overlayed onto the ...
1
vote
0answers
27 views

Disappearing layers in ArcScene

This is very frustrating! I have DEM hillshade layers which I have tried to change the base heights to floating surfaces. I have done this with these layers before (!) but had to change them back and ...
0
votes
0answers
36 views

Advice on how to present a cross section

So, I'll try to best explain what I want to do. I have a DEM of a volcano (only showing half the DEM in pictures below) and I have identified a lava flow that I would like to make a cross ...
0
votes
1answer
32 views

Fixing Hole in DEM?

I have what looks like a hole in my DEM! I don't think it is affecting my calculations, but either way, I would quite like to correct it. Does anybody have any idea how? Please see the attached ...
5
votes
3answers
1k views

How to make 3D building models from lidar data?

I have Lidar data, ground points and first returns. I have processed it and have ready tiles from which I am trying to build 3D building models. So far I was able to just extrude the buildings in ...
1
vote
2answers
49 views

Issue with vertex level editing in ArcScene

I have a 3D data set of some buildings in ESRI Shapefile MultiPatch format. The buildings appear in 3D in ArcScene (10.2.1 on Windows 8.1 64bit) and I am able to move, rotate and scale buildings. ...
0
votes
0answers
19 views

'The layer and specified base surface do not overlap in extent' error message

I am trying to change the base height of a jpg file to but it comes up with the message:'The layer and base surface do not overlap in extent. Verify they are for the same study area'. Both layers are ...
4
votes
1answer
396 views

How to export 2D vector graphic from ArcScene to Illustrator?

I need to know how to export 2d vector graphic from ArcScene so I can edit it with Adobe Illustrator. I've tried changing the options when I export 2D scene as AI file or PDF file, but they always ...
0
votes
0answers
34 views

How can I extrude a polygon “below” a base height?

I am creating some animations and short movies in ArcScene showing how a number of disparate datasets relate to one another. In one of these movies my "big finish" is to extrude a number of polygons ...
0
votes
0answers
34 views

display issue in ArcScene 10 in Windows 8

I don't know if anyone can help, but when I use ArcScene 10 the model area is poorly displayed (see image). However, if I go full screen, the display is perfectly clear. I am guessing this is a ...
1
vote
1answer
54 views

How to display Arcscene polygon extrusion edges?

When I extrude polygons in Arcscene 10.0, the polygon outlines are not displayed regardless of the symbol outline width/color. Thus the extruded edges are not shown. Here's a screenshot showing the ...
1
vote
0answers
112 views

Why isn't View>View Settings working in ArcGIS 10 ArcScene?

I am running ArcGIS 10 desktop verison with the 3d Analyst extension to view DEMs in ArcScene. I want to view the DEM from a specific xyz location, which should be achievable using the View Settings ...
1
vote
1answer
76 views

ArcScene 2D export

I'm submitting a paper to PlosOne, and have been using ArcScene to produce my 3D mapping. However, I'm struggling to comprehend quite how to meet their image requirements ...
3
votes
2answers
282 views

How to create 3D water depth with ArcScene?

I was trying to visualize flood depth in 3D using ArcScene. What I had for this purposes are: high-resolution DTM of the valley orthophoto and Raster with flood depth information. I have draped ...
10
votes
4answers
498 views

Looking for a free program for 3D visualization

Looking for a free program or web software for 3D visualization. I'd like to have an ArcScene like abilities. No editing needed, just need to see the data in a 3D format. It'd be really helpful for ...
1
vote
2answers
462 views

How to extrude polygon features from a TIN surface in ArcScene?

How do I Extrude polygon feature class from a TIN surface using ArcScene 10.1?
2
votes
4answers
886 views

Arc Scene vs Sketch up

I am very familiar with Arc Map but have not really used Arc Scene. (I'm on 9.4) I am wanting to create an house model for remodeling and am wondering if it would be easier in Arc Scene or Google ...
0
votes
0answers
26 views

How to Run Topology in 3D Cadastre Models

I have one 3D cadastre model represented as Multipatch file in Arcscene. I want to run topology of those files. I found that we cant run topology for multipatch files. Is there any option to convert ...
0
votes
0answers
151 views

Reducing the Size of a 3D model created in Sketchup

I created a building in sketchup. It is of higher size(25 mb), so I exported it as Collada file(6 mb). Here I reduced the size of the images to the maximum possible level. Still the collada file (3 ...
1
vote
0answers
62 views

How to represent the time(weekly/monthly) variationof a polygon map using one image?

I have a base map made up of three hundred polygons, each polygon get lots attribute values(For example, each week/month get a value). But I want to draw only one picture(due to page limitation) to ...
1
vote
1answer
122 views

ArcScene TIN smooth

I created a TIN with ArcScene out of laserscan point data. I want to smooth the spikes (image below), to get a nice crossover on the elevations of the surface. Do you have any advice how to do that? ...
0
votes
0answers
44 views

ArcObjects: How to remove a custom layer?

How is a custom layer supposed to be destructed? I have a custom layer that implements drawing by overriding IActiveViewEvents::AfterDraw. The problem is that sometimes when the custom layer is ...
3
votes
1answer
61 views

Split single line based on the 3D length

so I have a transect line which I already add the z value using the Interpolate Shape. I need to split this line into 100m in 3D length, which due to elevation must be different than 2D. However the ...
1
vote
1answer
37 views

Creating a fly through video of a 3-D map

I'm currently working on creating a 3-D map in ArcScene of a watershed proximal to my college campus. I've had trouble saving the work (outlined in a previously posted question) but am capable of ...
0
votes
0answers
24 views

How to save a 3-D map without it becoming distorted

I'm currently working on creating a 3-D map of a watershed. Within ArcScene I've used an elevation raster as the base map and included the streams within a watershed. When I originally create the map, ...
0
votes
0answers
42 views

ArcObjects SDK: Textured MultiPatch: problems with large texture images

I am using IGeneralMultiPatchCreator to create a textured MultiPatch. This works fine for small texture images, but fails for larger images (15 MB .png). In ArcScene the MultiPatch is displayed in ...
1
vote
1answer
101 views

Can I share ArcGlobe bookmarks with ArcScene and vice versa?

I am working on a flyover animation and would like to be able to seamlessly go between ArcGlobe and ArcScene and the other way around. I tried saving and using the bookmarks in but this does not seem ...
1
vote
1answer
113 views

ArcScene does not update z value after edit

I measured a feature with x, y, z coordinates. It's the green point cloud below When I vied the points in Arscene, there was a known measurement error that I had fixed by adding 1.6 m to the Z ...
1
vote
0answers
72 views

3D Surface Model - Cut Out

I have create a 3D surface model in ArcScene. However, I would now like to display it for printing. Basically im trying to make the 3D model look like the attached image but i have no idea how to make ...
0
votes
0answers
79 views

Calculate x,y,z distance between 3D point and multipatch closed polygon in ArcScene

I have a multipatch polygon and a pointZ FeatureClass containing a single point. I would like to calculate the distance in X,Y,Z from the point to the closest point on the surface of the multipatch ...
1
vote
1answer
43 views

ArcScene for indoor-navigation?

I'm new to the field of gis but I was wondering if there exists anything in ArcScene for indoor-navigation. I have to model a building and then implement a wayfinding component for it. Does ArcScene ...
4
votes
2answers
4k views

How to easily label point values in ArcScene?

I would like to be able to quickly label point values in my scene. I am aware of the fact that there is no out-of-the-box solution to label features in ArcScene similar to the one in ArcMap. (No ...
7
votes
1answer
3k views

How to insert a “basemap” into ArcScene?

I want to model a 3D scene, showing layers floating above a flat map. Currently, I am able to show the floating layers, but I cannot add the bottommost map layer. I just want to add a "basemap", like ...
2
votes
0answers
112 views

Turn bathymetry into elevation in arcGIS?

My raster is in depth of bathymetry however when this is shown in 3D it reverses the elevation making the deepest points the highest in elevation and the shallowest points the deepest. This makes a ...
1
vote
1answer
85 views

Display photos in time slider

I have a shapefile of points with geotagged photos attached through the Photos toolset, they correspond to a line shapefile that documents a trail taken while hiking. I am looking to create a video of ...
1
vote
1answer
196 views

ArcScene3D layer rendering problem [duplicate]

I'm having problem with ArcScene. I'm doing a project on the visual impact of felling areas of forest in locations regularly visited/used by people. I have viewpoints and have created a TIN model ...
1
vote
1answer
89 views

Can't select or delete 3D contours - ArcScene

I used the "Create Contour" icon in 3D Analyst on a TIN. But now I can't hide, select, or delete those contours. I even tried deleting the base TIN to no avail. ArcScene 10.0. Any help please? ...
0
votes
1answer
105 views

How to select a subset of a DEM in ArcScene?

I'm using ArcGIS 10.0 and trying to open a digital elevation model in ArcScene. I'm working on a project and got the DEM data from official sources which is quite huge. The resolution of the DEM is 1 ...
0
votes
0answers
131 views

Generate 3D grid in ArcGIS

I have DEM layer which I am vieving in ArcScene and project the z index to view actual 3D view of the DEM surface.Now i want the grid surrounding this DEM something like Fish net but a 3D having grid ...
0
votes
1answer
118 views

How to add layer in Arcscene using script tool

import arcpy mxd = arcpy.mapping.MapDocument("CURRENT") df = arcpy.mapping.ListDataFrames(mxd, "*")[0] addLayer = arcpy.mapping.Layer(r"F:\project\Final\Ground floor\steps.lyr") ...
5
votes
2answers
418 views

Problem Visualizing 3D Terrain Model - USGS DEM

I recently downloaded a GeoTIFF 1 arc second from the USGS National Map Viewer. I added the raster to ArcScene and attempted to visualize the data in 3D. I set the Base Height to Floating on a ...
1
vote
0answers
292 views

multipatch features are not visible in 3D ArcGlobe

I have created some 3D features in ROCKWORKS software, which represents lithology data. Then I converted it to 3D shapefile, and then I added it to ArcGlobe as well as ArcScene. It is clearly visible ...
1
vote
0answers
135 views

How do you specify the width of a column that has been extruded from a point in arcscene?

I've extruded a set of points based on a z variable but I want to increase their width so they're easier to see.
1
vote
1answer
626 views

VRML export issue ArcScene

when I try to export simple Tins (or documents which contain Tins) from my ArcScene to .wrl the export fails. Please see my example: I have the following table (xlsx): X Y hoehe 28 -2 0 -2 ...
2
votes
1answer
150 views

Making a subsurface TIN model

I had been very glad if any of you have time to help me. I am a student and currently writing a thesis. In this paper I will create a 3D model of a glacier, where I will show the internal structures ...