A 3D geovisualization software package by ESRI

learn more… | top users | synonyms

3
votes
1answer
127 views

Split single line based on the 3D length

so I have a transect line which I already add the z value using the Interpolate Shape. I need to split this line into 100m in 3D length, which due to elevation must be different than 2D. However the ...
2
votes
1answer
92 views

Landform design/3D in ArcMap 10.2

Im a self taught ArcMap user working in a small business, so no one to bounce problems off. My aim is this: I would like to be overlay different surfaces, manipulate them, and display them. The ...
1
vote
1answer
63 views

Adding Texture to the sides of an extruded polygon in ArcScene

I've been using ArcScene 10.2.2 to create simple extrusions of building footprints and now would like to add textures to them to make them more realistic. I want to add textures to the sides of the ...
1
vote
1answer
54 views

How do I interpolate a vertical surface in ArcScene 10.1

I have electrical resistivity data with X, Y, and Z values. I have imported these data into ArcScene and they display as points in the subsurface in a vertical plane, each with its own resistivity ...
1
vote
1answer
38 views

How can I add the ArcScene Extrusion option (Layer Properties) to the ModelBuilder

I have a feature class with points (X,Y,Height). I want to extrude these points to a height of zero and make lines of them. Can this be done within the ModelBuilder?
1
vote
1answer
120 views

3D analyst Enclose Multipatch

I have a point file with elevation data. Some of the points are elevations relating to soil horizons. I've created a tin surface for each soil horizon then used the "extrude between" tool to create a ...
1
vote
1answer
100 views

Disappearing layers in ArcScene

This is very frustrating! I have DEM hillshade layers which I have tried to change the base heights to floating surfaces. I have done this with these layers before (!) but had to change them back and ...
1
vote
1answer
79 views

Creating a fly through video of a 3-D map

I'm currently working on creating a 3-D map in ArcScene of a watershed proximal to my college campus. I've had trouble saving the work (outlined in a previously posted question) but am capable of ...
1
vote
1answer
61 views

ArcScene for indoor-navigation?

I'm new to the field of gis but I was wondering if there exists anything in ArcScene for indoor-navigation. I have to model a building and then implement a wayfinding component for it. Does ArcScene ...
5
votes
0answers
96 views

Display a NetCDF file in 3D

Does anyone know how to display a netCDF in a 3D Scene Map in ArcGIS 10.2? something like the pretty 3d graphics at the UC I've got hundreds of thousands of points/cells with values for a stretch of ...
3
votes
0answers
76 views

Both-sided transparency in ArcScene for extruded features

I'd like to extrude my polylines and make them transparent, but from both sides. As you can see below, the transparency works only on one side. I think it's something with the side-orientation. I can ...
3
votes
0answers
312 views

How to solve the problem when buildings are extruded without roof?

I tried to extrude buildings in ArcScene with Extrusion function in Layer Properties. But most of the buildings seem like only their walls are extruded. Instead of solid blocks, they appear like no ...
3
votes
0answers
360 views

Problem refreshing GroupLayers in ArcScene (ArcObjects 10 .NET SDK)

The functionality I am seeking is to add a FeatureLayer (containing some data from a file selected for import) inside of a GroupLayer collecting all of the data from that particular source. The logic ...
3
votes
0answers
425 views

Can I intersect (slice) a multipatch geometry and obtain the perimeter line of the intersection as a result?

Can I intersect (slice) a multipatch geometry with a vertical polygon (or an extruded line) to obtain the perimeter line of the intersection? (or better yet a polygon) I am creating fairly complex ...
2
votes
0answers
55 views

Adjusting heights within a DEM raster for visualisation

Problem I have a bathymetry DEM which I want to display in 3D (ArcScene or Fledermaus). The data set is one single raster but looks like it is a mosaic of several smaller datasets. The problem is ...
2
votes
0answers
65 views

Create shadow of building in ArcScene

I want to create shadow of a building at different time in ArcScene but I am a beginner of using ArcScene so I am not familiar with this. I am using ArcGIS 10.2.2 version. I tried to use "sun shadow ...
2
votes
0answers
47 views

3D marker symbol export problem (ArcGIS 10.2)

I am trying to create a webscene. I have a TIN and a point layer that is 3d enabled (point z). I added a 3d symbol marker to the point layer in ArcScene . When I use the "export to 3d web scene" ...
2
votes
0answers
74 views

Getting XY screen coords from ArcScene 3D point using ArcObjects?

I already know how to convert screen point (X,Y in pixels) to 3D point: ISceneGraph pSceneGraph = m_pSceneHookHelper.SceneGraph; IPoint pPoint; pSceneGraph.Locate(pSceneGraph.ActiveViewer, X, Y, ...
2
votes
0answers
109 views

Buildings missing texture in 3d web scene exported from ArcScene

A random sampling of buildings are missing textures. The models were made in Sketchup 8 and exported to COLLADA, then dropped in ArcScene. All of the textures are .jpg files. The models look fine in ...
2
votes
0answers
176 views

Turn bathymetry into elevation in arcGIS?

My raster is in depth of bathymetry however when this is shown in 3D it reverses the elevation making the deepest points the highest in elevation and the shallowest points the deepest. This makes a ...
1
vote
0answers
37 views

texture fill doesn't display in ArcScene

My texture fill doesn't display properly in ArcScene but it does in ArcMap. What am I doing wrong? Help! ArcMap: ArcScene: The same texture fill has been selected in both ArcMap and ArcScene. ...
1
vote
0answers
66 views

Displaying Trees in Arc Scene

I'm new to ArcScene. I'm using a historic map, in arcmap, to draw old roads, garden plots and tree locations. My trees are in a point shapefile in ArcMap, I brought them into ArcScene and I'm trying ...
1
vote
0answers
56 views

Making extruded polygons transparent

Is there a way to make an extruded polygon transparent. I've tried going to the properties and changing the transparency but the polygon still looks like a solid block. I have an extruded polygon and ...
1
vote
0answers
42 views

Representing GIS data in ArcScene so it looks like bar and circle?

Is there a way to represent GIS data in ArcScene so it looks like a bar and circle? I can only either get the bar by extruding my points but I wanted a circle on top. I dont know how to get my ...
1
vote
0answers
18 views

what is the output coordinate system when I use Near3D tool in ArcScene?

I added a 3D rectangular surface (rectangle formed by 3D points) and a 3D point as two different shapefiles and then I tried to use Near3D tool. Then it gives an error "Datum conflict between input ...
1
vote
0answers
75 views

Arcscene export issue: only upper layer showing up

I have created a 3d visualization with ArcScene 10.1. I have 1 hillshade of a portion of an area, which take elevation ifno from DEM of the same area. Also, the DEM is coloured and overlayed onto the ...
1
vote
0answers
93 views

How can I extrude a polygon “below” a base height?

I am creating some animations and short movies in ArcScene showing how a number of disparate datasets relate to one another. In one of these movies my "big finish" is to extrude a number of polygons ...
1
vote
0answers
118 views

How to represent the time(weekly/monthly) variationof a polygon map using one image?

I have a base map made up of three hundred polygons, each polygon get lots attribute values(For example, each week/month get a value). But I want to draw only one picture(due to page limitation) to ...
1
vote
0answers
134 views

Why isn't View>View Settings working in ArcGIS 10 ArcScene?

I am running ArcGIS 10 desktop verison with the 3d Analyst extension to view DEMs in ArcScene. I want to view the DEM from a specific xyz location, which should be achievable using the View Settings ...
1
vote
0answers
78 views

3D Surface Model - Cut Out

I have create a 3D surface model in ArcScene. However, I would now like to display it for printing. Basically im trying to make the 3D model look like the attached image but i have no idea how to make ...
1
vote
0answers
116 views

Is there a way to show outlines in a multipatch feature in ArcScene?

When viewed in ArcMap 2D environment, multipatch faces are outlined. When viewed in ArcScene 2.5 D environment, multipatch faces are not outlined, yet the symbol in symbology properties still shows an ...
1
vote
0answers
47 views

Feature class field count caching issue

In our application, we exposed a custom file format to ArcScene through a custom plugin data-source. However, we experience some problems which we ascribe to caching issues. We generate a dataset ...
1
vote
0answers
210 views

Relative paths in ArcScene document are broken if opened programmatically

When I open ArcScene document with relative paths programmatically from ArcMap, all those paths are broken. The location in source tab for broken layers is set to some different path like ...
1
vote
0answers
221 views

Layer 3D to Feature Class Empty Output

I'm trying to build 3D buildings from 2D footprints. I extrude by the building heights, and input the surface by editing the properties. From here I use the Layer 3D to Feature Class tool to convert ...
1
vote
0answers
324 views

multipatch features are not visible in 3D ArcGlobe

I have created some 3D features in ROCKWORKS software, which represents lithology data. Then I converted it to 3D shapefile, and then I added it to ArcGlobe as well as ArcScene. It is clearly visible ...
1
vote
0answers
161 views

How do you specify the width of a column that has been extruded from a point in arcscene?

I've extruded a set of points based on a z variable but I want to increase their width so they're easier to see.
0
votes
0answers
21 views

moving the building to the new location

How would it be possible to move a building in ArcScene, i.e. change the location of the building by 100 / 500 / 800 meters in order to check how it fits in specific environmental settings? I tried to ...
0
votes
0answers
28 views

How do you create a reference plane in ArcScene?

By using the surface volume (3D analyst) tool on ArcScene I was able to find the total volume under a set reference level. However, for the sake of visualization, I wanted to include these reference ...
0
votes
0answers
145 views

Integrate BIM (Revit) and GIS (ArcScene) (IFC to CityGML)

I am doing a project related to integrate BIM and GIS for visibility analysis. I exported the BIM (Revit project) to IFC format from Revit. But I cannot use the IFC for visibility analysis in ...
0
votes
0answers
19 views

Base height information is lost when I create a Scene Package

I am using ArcScene 10.2.2 When I create a scene package, and then unpack it, I lose any base height information I have given to layers in the package, which I have draped over TINs. I get the Error ...
0
votes
0answers
39 views

Exporting 3d shapes from CityEngine to ArcScene

I have a 3d city model in CityEngine and exported it to ArcScene (Multipatch Features). Then i would like to float the shapes on a DEM. The problem is, that i can not float it on that DEM in ...
0
votes
0answers
28 views

Creating a Obstacle Identification Surface without the ArcGIS for Aviation?

Does anyone have an experience creating an Obstacle Identification or Obstacle Limitation Surface in ArcGIS without purchasing the ArcGIS for Aviation extension? We have a small project that requires ...
0
votes
0answers
127 views

Creating a 3d terrain model using a DEM raster file

i have a DEM Raster file and i would like to create a 3D Terrain Model using ArcScene. Is this possible, if yes, how? Thanks.
0
votes
0answers
60 views

3D Analyst Extrude Between

I have a few TIN surfaces at different elevations, basically soil profiles, I've used the "extrude between" tool to create multipatch features. However, only one of the features says it is a closed ...
0
votes
0answers
84 views

Advice on how to present a cross section

So, I'll try to best explain what I want to do. I have a DEM of a volcano (only showing half the DEM in pictures below) and I have identified a lava flow that I would like to make a cross ...
0
votes
0answers
98 views

'The layer and specified base surface do not overlap in extent' error message

I am trying to change the base height of a jpg file to but it comes up with the message:'The layer and base surface do not overlap in extent. Verify they are for the same study area'. Both layers are ...
0
votes
0answers
800 views

Reducing the Size of a 3D model created in Sketchup

I created a building in sketchup. It is of higher size(25 mb), so I exported it as Collada file(6 mb). Here I reduced the size of the images to the maximum possible level. Still the collada file (3 ...
0
votes
0answers
65 views

ArcObjects: How to remove a custom layer?

How is a custom layer supposed to be destructed? I have a custom layer that implements drawing by overriding IActiveViewEvents::AfterDraw. The problem is that sometimes when the custom layer is ...
0
votes
0answers
29 views

How to save a 3-D map without it becoming distorted

I'm currently working on creating a 3-D map of a watershed. Within ArcScene I've used an elevation raster as the base map and included the streams within a watershed. When I originally create the map, ...
0
votes
0answers
242 views

Generate 3D grid in ArcGIS

I have DEM layer which I am vieving in ArcScene and project the z index to view actual 3D view of the DEM surface.Now i want the grid surrounding this DEM something like Fish net but a 3D having grid ...