To group or to do something in a group as opposed to doing it individually

learn more… | top users | synonyms

3
votes
0answers
38 views

Batch merging shapefiles from different folders, different subfolders

I tried some of the scripts I found but none worked so far. What I am trying to do is batch merging hundreds, maybe thousands of shapefiles from different folders/sub-folders into a single shp or ...
2
votes
0answers
15 views

Batch raster calculation of slope and aspect in SAGA

I am relatively new to the SAGA software, I have only used it for small amouns of data, and for basic calculations. My data is obtained by mapping certain areas in GoogleEarth, then, overlaying the ...
2
votes
2answers
170 views

Batch rectifying 200+ historic aerial images?

I have acquired historic aerial imagery for the surrounding towns, circa 1954, and the images have no georeference. I am looking for software to help me batch-rectify the 200+ images. I have current ...
1
vote
1answer
22 views

Adding images to raster field in batch

So I've got about 300 records in an attribute table that each need an image to go with them. I've created a raster field on the table, and I've got all the needed images as rasters in the same GDB. ...
1
vote
0answers
34 views

How to batch classify a multi-temporal raster image stack?

I am using dense time stacks of remotely sensed imagery to analyse vegetation change in the Arctic from 1984-2010 for one scene. I will be needing to classify each image, likely using the Maximum ...
1
vote
0answers
194 views

Creating batch file from ERDAS IMAGINE Spatial Modeler?

How to create batch file from the ERDAS IMAGINE Spatial Modeler? I want to do the same process to different input images, something similar which we can do by batch processing of the existing ...
1
vote
1answer
102 views

QGIS's raster calculator— running as a batch process?

I have a series of raster files (150 or so) that I need to multiply by a baseline raster. Unfortunately, the series of rasters have a different cell size (30mx30m aka .00027777778 degrees x ...
1
vote
0answers
37 views

Rectification of a lot of images using ERDAS IMAGINE

I want to rectify many images of same area but different dates at a time in ERDAS Imagine 1 I did this using Batch processing but I have no out put. Second I did reproject many images using Batch ...
0
votes
1answer
27 views

Watching folder for arrival of files to batch process?

Is there a way to maintain a watch on a folder to enable automatic file type conversion? I have a program that dumps DXF files - I batch convert all files to both shapefile and mapinfo format. It ...
1
vote
2answers
175 views

GDAL/PYTHON: Batch Process Project All Level 2 HDF Files Only(Filter) and save to new directory

I have downloaded numerous hdf files from an ftp site. Let's say I already have 500 hdf files, 250 of them were level 1 hdf files and the rest were level 2. The level 1 format is: ...
1
vote
2answers
1k views

Getting print statements in Python script to print through a batch file

I'm starting to learn Python and batch files. I have a Python script which selects data by location and exports the selection to a new feature class. The script runs just fine - included in this ...
2
votes
1answer
683 views

Batch Mode Routing for Fastest Route Distance

I would like to run a batch process to derive the total driving distance between points, for a largish set of point-pairs. e.g. I would have data something like: Start_ID Start_Lat Start_Long ...
2
votes
2answers
47 views

Batch Envi read and write to tif

Is there a way to batch read in ENVI standard image files (they have associated headers) and export them to a GeoTiff ? I have a folder of ~500 images
1
vote
1answer
39 views

Batch processing of geodatabases - join raster with table

I am unsure how to go about doing this using Python in ArcMap, though I know how to do it by hand. I have geodatabases containing gSSURGO data, one for each state, in their own folders. I have a ...
1
vote
1answer
47 views

Batch processing in ENVI?

I opened a headerless flat binary file in ENVI. I used menu->save file as->TIFF/GeoTIFF to save it as tiff image. I have 100s of images to convert into tiff. How can I do this batch processing ...
1
vote
0answers
53 views

Error on 'Extract raster values to CSV' in batch process in QGIS

The Extract values (csv) contained a bug in the script. The below link shows how to correct the bug. Error on 'Extract raster values (CSV)' - Error executing algorithm 1 'Dataset' ...
1
vote
2answers
66 views

Batch Geocode Postcodes/Addresses in UTM

My work has a database of previous jobs (within housing plots) which are meant to have been georefernced with UTM coordinates, but this has not been completed for a number of years. New jobs can use ...
2
votes
1answer
67 views

How to create header files for multiple rasters in R

I have nearly 1000 generic binary images, i.e., headerless, band sequential and binary (16-bit signed integer). I have been succesfully able to load these with package 'raster' only when I create an ...
1
vote
0answers
60 views

Batch exporting suites of similar maps in ArcGIS 10.1 / 10.2

I work for a flood risk consultancy where one of the most common outputs from our projects is a suite of maps created in ArcMap 10.1 / 10.2 showing the results of our hydraulic model simulations. We ...
2
votes
0answers
66 views

Run a large model by calling it in a python script?

I've created a rather large model containing a sub-model that calculates the volume of water basins(playas) in a relatively flat area of Texas. The volume is taken from one foot slices of each each ...
3
votes
2answers
873 views

Batch Clip in ModelBuilder of ArcGIS for Desktop?

I have multiple rasters and feature classes that I want to clip to a study area. I am pretty new to ModelBuilder. I know you can right click the clip tool to batch clip outside of ModelBuilder but ...
2
votes
1answer
56 views

Why were Series variables of ModelBuilder removed at ArcGIS 10.0?

I've read a number of posts regarding the sequential batch processing of a model in ArcGIS. In particular this one, because I'm having the exact same issue. Recently, I found an old 9.3 help page ...
1
vote
0answers
66 views

Batch GDAL_Calc multiple band calculation

I have a question concerning gdal_calc. I´m running windows 7 64b and am working from the OSGeo4W shell. I have multispectral images that need to be prepared for analysis but they are not saved in a ...
0
votes
2answers
136 views

GDAL for Python: extracting subdomains from NetCDF file?

I need to make a script that processes a NetCDF file that contains 3 days of hourly forecast data from the norwegian meteorological office. The NetCDF file contains various data I need ...
1
vote
1answer
47 views

Rasterizing vectors in SAGA via saga_cmd - how to set the exact cellsize, extent (basicly grid system) based on other grid?

I'm doing some batch analysis using SAGA's saga_cmd. Basicaly I have a lot of grids and shapes (mainly generated in SAGA by vectorization of raster classifiaction results). Now I'm trying to make ...
2
votes
2answers
226 views

MODIS Level 1B batch process

I am a new MODIS Level 1B user. I have been using the MODIS Swath tool to process my images. However, I have over 1000 images to process. I was wondering if there a script available in IDL or R (very ...
4
votes
2answers
500 views

Does Calculate Value (Model Only Tool) work correctly in tools run in Batch?

Am I correct that if my model has a model-only tool (Calculate Value), and then I run the model as a batched process, it will not run the Calculate Value expression? I wrote a model to upload, ...
1
vote
0answers
1k views

How to batch a model created with “model builder” in arcmap 10? [duplicate]

I created a simple model that selects iteratively elements from a point dataset and calculates a cost distance raster for each of these points. It works fine when I run it for just one dataset, but ...
2
votes
0answers
40 views

mapquest batch geocoding truncate response

when I use the batch geocoding service I get sometimes a right answer an sometimes an error using the same arguments. I inspect the headers using curl... when the answer is right the headers are: ...
4
votes
1answer
261 views

How to calculate X and Y projected coordinate in batch processing

I have more than 1000 shape files (all are point features). They were initially in WGS 84. I projected them in UTM. Then through batch processing I added X, Y fields in each table. But all the X, Y ...
2
votes
2answers
87 views

How to batch run an FME workspace on a feature basis?

Not sure about the title of my question... My point is to run an entire workspace for each feature contained in a reader. In python this would look like: for s in bus_stops: run_workspace(s) ...
2
votes
1answer
36 views

How to read ASTER metadata in IDL?

I'm trying to read many ASTER images (1B mainly) in IDL (I can try in R also). I'm used to work with Landsat, but the aster metadata is complicated. I write a code with a lots of conditional that can ...
21
votes
4answers
3k views

Bulk load multiple shapefiles into PostGIS

I've got over a hundred data layers in shapefile format that I want to upload into a PostGIS database. They are all in the same projection, but represent different data layers so they do not have the ...
1
vote
1answer
77 views

Can I batch import attribute tables into existing excel spreadsheets

I am using arcGIS 10.2 and I need to import the attribute tables of 100 layers into existing excel spreadsheets which will make graphs based on the values in the attribute tables. Doing this ...
1
vote
1answer
77 views

How to batch-process attribute tables in QGIS (or GRASS)?

I'm using GRASS 6.4.3 in Linuxmint 16. I have a bash script for GRASS which I use to process almost 300 raster files. The script first imports some raster files (r.in.gdal), then does some ...
7
votes
1answer
390 views

Batch Georeferencing in ArcMap 10.2

I have about 50 pdf maps that I would like to batch georeference and/or georectify. I've saved one as a jpg and georeferenced it manually and would like to automate the rest which are in the same ...
0
votes
0answers
81 views

Running a bat file for rebuilding and republishing a geocoder using two Python scripts, but would it work better as one script?

We all love ESRI and Python.... I'm looking for some insights and here is the situation. I've got a bat file calling two separate .py scripts. The first .py is a geocoder rebuild and the second is a ...
0
votes
0answers
93 views

How to process multiple images in Grass GIS

first of all, I have to mention that I'm almost new working with Grass and I'm using Grass 6.4.3 on Linuxmint 16. I need to process a large number (~300) of Landsat images. I have downloaded the ...
0
votes
1answer
147 views

How can I take a large netcdf and convert it to interpolated values in a different set of coordinates?

I've got a large netcdf (a small portion of the data is here) with the data in an even grid associated with an Albers Equal Area Conic projection. I've got the corresponding latitudes and longitudes ...
0
votes
1answer
82 views

batch attribute table export

How can I export multiple raster attribute tables at once? Using the batch grid control tool mentioned here? Batch Export feature attribute to ascii I can't seem to find how to access the tool in ...
2
votes
1answer
83 views

How to batch generate thumbnails of raster layers with R?

I have been using R to maintain a rather large stack of raster layers (over 700 layers of data for sub-Saharan Africa). Each layer looks as follows ...
2
votes
0answers
32 views

QGIS : launch Atlas composer generation from command line

I am using QGIS 2.2 and have configured a composer with atlas generation. I would like to launch this atlas generation every day. The idea is to write a batch and launch it with a cron. Is it ...
0
votes
0answers
28 views

Batch geocoding of 45000 Addresses [duplicate]

I'm looking to geocode a database of approximately 45000 addresses. I have them in CSV format and would like to get the results in CSV format. I have tried BatchGeo several times. Their interactive ...
2
votes
3answers
441 views

How to batch-process georeferencing of rasters (prelude to animation)?

I have many (10k) raster files, all with identical size and pixel dimensions, which need to be georeferenced. I would like to georeference one of them manually, using either QGIS or GRASS, and then ...
1
vote
1answer
53 views

List the tab/shp files properties within folders/sub folders w.r.t relative folder path [closed]

Currently i am using this command line For /R "U:\01 My Proj" %f in (*.tab) do ogrinfo -al -so "%f" >>U:\New.txt to extract all the tab file related information as a text.Instead of giving the ...
0
votes
0answers
46 views

How to cut a shapefile using a batch?

I would like to cut a shapefile using a batch (like in the photo): But I have some problems because I don't know what do I have to put in field "extent" and after putting somthing like ...
0
votes
1answer
70 views

Generating buffers in a automate way

I would like to creat buffers in a automate form and no matter the way (e.g. script, batches and etc) I am asking if anybody here knows how to do it or if are there scripts ready to do it. My ...
0
votes
0answers
74 views

Batch join non-spatial csv to shape files

I have 173 point shape files from soil testing and 173 non spatial csv files with lab ressults (one csv for each shape file) that need joining. The files are located in a library with folders named ...
1
vote
2answers
163 views

Unsuccessfully trying to iteratively run gdal_polygonize in a batch file [closed]

Thanks in advance for your help with this. I've been reading, experimenting, and banging my head against the wall for a couple days on this, and could really use some assistance. This is my first ...
6
votes
1answer
371 views

nested iterator, 2 iterations in one model, collect values, cell statistics, batch processing dialogue box

(ArcGIS10, SP2, ArcInfo) Dear all, this is my model, and it works perfectly, but .... I do have a large amount of data to process. The interim output files (from raster calculator, collect value) ...