0
votes
2answers
52 views

How to draw a perfect circle with a set radius in meters on map?

Following this istructions on how to draw a circle I can make buffer layer on each point I need. I am not able to draw perfects circle because the buffer will be elliptic? The CSR is EPSG:4326 - WGS ...
2
votes
1answer
48 views

create polygons and fishnets of specific size and orientation and buffers

I want to study 6 areas in the field and in order to do so I want to divide each one of them into smaller areas/parts. What I would like to do is find an average square or rectangle area surface ...
4
votes
2answers
51 views

How to achieve “Flat-End” line buffers in QGIS?

I need to buffer a series of lines by 40m, however I only want the buffer to come off the sides and not off either end of the line. I know in ArcGIS there is a "flat-ends" tickbox that achieves ...
2
votes
2answers
66 views

Select part of a polygon on one side of a line QGIS

I have a line shapefile of the outline of a water body. It was created by conversion of the polygon to line. I am looking to add a layer of 500m standoff from the shore into the lake. I have added ...
3
votes
0answers
64 views

Performing buffering and intersection with script in PyQGIS

I wrote a script that performs the intersection of two layers: The first Layer -> layer1, represents the rivers The second Layer -> layer2, represents a set of circular dots distributed in a ...
1
vote
0answers
44 views

Way to split and create buffer space between polygons in QGIS or ArcMap

After performing a feature extraction of rooftops, some of my buildings have been joined together as one polygon. I want to split these large polygons so that each new division is only covering one ...
2
votes
1answer
125 views

QGIS - Create buffer in meters

I'm very new to the GIS world, so my problem could be very stupid, but I'm going to try anyway. Objective Given a list of coordinates in longitude/latitude, stored as a .csv file, I want to create a ...
4
votes
3answers
141 views

How to compute the outline of multiple tracks?

I have multiple gps tracks with depth data gathered from the lake. The tracks are overlapping/intersecting. I want to get an outline polygon. I have a multi-line shp. I've tried to diffuse it in qgis ...
1
vote
0answers
42 views

How to calculate the area of overlapping buffers within a single layer

I am very new to GIS, so don't know if this is EXTREMELY easy or impossible. I have GPS coordinates for stores (about 15000) for which I have created a buffer zone around each store location ...
1
vote
2answers
103 views

How to split a (road) buffer using the centerline?

I have a road centreline dataset which I have buffered using the road width. I used the standard QGIS buffer tool. I realise for my analysis I actually need to split the road buffer in half and ...
0
votes
1answer
61 views

QGIS convert polyline to fixed width polygon

I have a shp file of polylines for trails, and I need to convert them all to be polygons that are 8 ft wide (4 ft from the center of each side of the polyline). I tried a following a few other posts ...
0
votes
0answers
52 views

Is it possible to use custom (non-circle) buffer shapes?

I have a shapefile containing points. I'd like to replace each point by the same shape, centered around the point, like the "Buffer" tool with shapes other than circles. How can I do that?
0
votes
0answers
38 views

v.buffer angular buffer doesn't take all the polygons into account

I am trying to create an angular buffer around building footprints with the v.buffer command (QGIS 2.2). There is no error message, but the algorithm doesn't take into account all the buildings. This ...
1
vote
3answers
94 views

Create buffer in Metres

I want to create a buffer in meters around points in Europe. But I cannot find a proper CRS for Europe that is in meters instead of degrees?
0
votes
1answer
67 views

Generating buffers in a automate way

I would like to creat buffers in a automate form and no matter the way (e.g. script, batches and etc) I am asking if anybody here knows how to do it or if are there scripts ready to do it. My ...
0
votes
0answers
42 views

Creating multiples buffers (or rings)

I would like know how could I creat and automate with a batch multiples buffers (or rings) between two cut buffers where is crossing roads. I creat rings using the attribute table but I can't ...
2
votes
1answer
134 views

How to creat multiple rings between two circular buffers?

I am working with mathematical-ecological modeling and I am also a new user of QGIS Software. First I am creating 3 circular buffers with same center (shape center) covering a region with roads (shape ...
1
vote
0answers
64 views

How to clip polygons within buffer using QGIS?

I am trying to do the clip operation with polygons in the buffer, so far I'm getting no results. It is working for points in the buffer. Am I doing anything wrong? Basicly I'd like to include ...
0
votes
1answer
49 views

Summing the number of intersections with a separate buffer layer

I have dabbled with ArcGIS and QGIS a bit, and I consider myself a self-taught beginner with a whole lot to learn. So, I have two layers: 1) census blocks, and 2) point data. My goal is to calculate ...
2
votes
2answers
81 views

What's the use of the buffer function in field calculator?

I'm trying to find out how the buffer command in the filed calculator works. I tried to create a new field to my point shapefile (integer) with the following: buffer ($geometry, 100) but no ...
1
vote
2answers
43 views

Creating Many Uneven Buffers

Qgis 2.2, Windows 7 I am looking to create buffers around city lights (the raster). Currently, I have simple polygon buffers around the point layer (oecdminusa), but this is not accurately capturing ...
4
votes
3answers
137 views

How to shrink polygon on two sides?

I have a polygon which I know is a rectangle, although it may be at any orientation: I want to shrink this polygon by a third of the width from two sides, so that I just get the strip in the middle ...
3
votes
1answer
285 views

How to create multi-ring buffers automatically in QGIS?

I'm wondering if anyone knows of a tool or plugin for QGIS that allows for multi-ring buffers. I've found a post about doing multiple buffers one by one, but was hoping there was a way to do this all ...
2
votes
0answers
65 views

Zonal Statistics Freezing QGIS 2.2

Running on Windows; 8gb memory, 500gb HD, i5 cpu; Raster file: 250mb I am having a problem with zonal statistics advancing past 17%. I am trying to run statistics on a crop grown in certain counties. ...
0
votes
0answers
16 views

empty buffer qgis

Help! I am trying to use three buffers to select three different sets of polygons. The buffers are from a .txt file with lat and long in decimals. I made a shapefile using North America Albers (I live ...
0
votes
0answers
21 views

buffer in qgis from layer text delimited

I have a layer of polygons in British Columbia, Canada in WGS 84 which is fine. Later I created shapefile of three points (using decimals for lat and long) through the add shapefile as text delimited ...
0
votes
0answers
40 views

how to mark certain distance alongside a coastline and saved as kml to import to google earth?

Hi all I would like to mark the region of 200 nautical miles away from the coastline, how can i do this? Thanks in advanced...i already try the buffering function on qgis but dont know how to create a ...
1
vote
0answers
61 views

How to Simulate Venn Diagram of Buffers using QGIS?

For the sake of simplicity, suppose I have only 2 points on one layer. Point A have population of 100, and point B have population of 150. I do find buffer of these 2 points and it is intersect. I ...
0
votes
0answers
45 views

Zonal statistics won't work after re-projecting vector layer

I have qgis 2.0. I want to analyze raster information within a buffer of 30 miles around a vector layer of cities across the world. However, both the raster and the vector are in WGS84. I have no ...
3
votes
2answers
253 views

Creating square buffer in qgis

How can I create a buffer with square ends along a line segment in qgis? I've buffered lines using v.buffer in the GRASS plugin, but the -c option for square ends is not exposed in that interface. ...
2
votes
0answers
14 views

Eliminating/minimizing distortion in 200 NM EEZ buffers [duplicate]

I frequently need to calculate buffers of 200 nautical miles from country or baseline polygons in order to map maritime Exclusive Economic Zones (EEZs). However, I've noticed that when generating the ...
2
votes
1answer
243 views

Creating buffers that will not overlap in QGIS

I am dealing with a .shp with a number of points in it. The distances between points range from ~300m to 5km. I wish to create a 1 km buffer around each point with as little overlap as possible. Each ...
0
votes
1answer
81 views

Can I “undo” buffering of a point layer in QGIS?

I have point layer, where each point is one tree, about 1300 trees in total. I made buffers around each tree, the buffer being the height of each tree in QGIS 2.0.1. My next step was to use Spatial ...
2
votes
0answers
115 views

How to use buffer() in QGIS Value Relation field

When adding a point, I'd like to auto-populate one of its fields (the street address) setting it to a field in the nearest point in another layer (a layer containing all existing addresses). It ...
1
vote
2answers
382 views

How can I create a merged buffer in QGIS then count points that fall within it

I have a QGIS plan which shows ponds (as points in a shape file with an OS tile as a background) within a survey area. I need to calculate the total number of ponds within 1 km of each of the on-site ...
1
vote
1answer
116 views

Creating a point buffer along a road network [duplicate]

I have a road network and have added points indicating fire hall locations. How would i go about creating buffers on those points following the road line. The result am i looking for would create a ...
2
votes
2answers
133 views

Set projection/CRS in map and shapefile to produce buffer

I simply want to create a buffer of a specific size, around a single point. When I create a buffer it uses degrees/ or radians, or whatever, and the buffer is created that covers the whole screen. I ...
1
vote
1answer
189 views

How to calculate the intersect two shapefiles [duplicate]

I have two shapefiles. 1. the clinic buffers 500m area. 2. the postcode area. Is there a simple way to calculate the intersect two shapefiles ? I'm using QGIS Dufour. I tried to use fTools to ...
3
votes
2answers
217 views

Need Projection Help to Buffer Lines in QGIS

I am somewhat new to GIS in general, and very new to QGIS specifically (I took one class and we used Arc, which I don't have access to any more). I need to create buffers (1km, 3km, and 5km) around ...
1
vote
1answer
70 views

why are my buffers not lining up with their original points despite setting the layer crs as all the same crs when I reopen my project [closed]

I am having my entire project in pseduo mercator (google earth raster image) and when I create buffers for points and then open back up my project all the buffers are offset from their points. ...
4
votes
4answers
262 views

How to convert result of dissolved buffer into individual polygons?

I am wondering if there is a way to easily split results of a disolved buffer into individual polygons? E.g in the screenshot below all of these buffers are one item, can I split them into individual ...
2
votes
1answer
152 views

How to load a memory layer into map canvas an zoom to it with pyQGIS?

I would like to load a vector memory layer into the map canvas with pyQGIS. Background is, I create a memory buffer layer around point data. While iterating the points I would like to visualize the ...
1
vote
2answers
694 views

QGIS - Continuous buffer image [Heat Map]

Is it possible to have the representation like the one the heat-map like the figure below using QGIS? The way seems to use buffer options, but I do not know how. Does exist any plugin that helps? I am ...
0
votes
1answer
90 views

Why does my buffer take up the entire screen?

I am using QGIS. I am aware there is a similar question here but the solution (changing the layer CRS) is not working for me. I cannot change my CRS as I am using information for the entire ...
1
vote
0answers
106 views

Why does the buffer tool keep producing ellipsoid when I want a circle?

I want to create a 50 mile radius around a point. I've got the point as a layer. I've run the buffer tool found in Vector -> Geoprocessing Tools and set the distance to 0.5. Every time I run the ...
1
vote
0answers
122 views

How to create a buffer around a point that takes terrain elevation in account?

In QGIS, I am creating a few different buffer around points to simulate walking distances. For example, 10 minutes walk about 800m at 5km/h. Using population density, I then clip a population layer ...
3
votes
2answers
434 views

How to do a Point to Polygon analysis with multiple variables?

I have a database of almost 10k crimes, which are divided in to 10 categories and plotted on a map I also have a database of 12k addresses, which are also plotted on the map. I aim to perform a ...
2
votes
2answers
221 views

Why does the buffer take up whole screen?

I am trying to create buffers around the Hurricane Sandy path I created in QGIS (points are lat/long). I have both points from each day she was tracted and the line I created from it with Points2One. ...
0
votes
1answer
183 views

Sum of values within a buffer polygon

I need to do the following in QGIS and hope so much anyone could help. I have a vector layer with points. Each point represents a firm with the number of employees in the attribute table. I want to ...
0
votes
4answers
201 views

Buffer in QGIS/R is 650-670 m wide instead of 500 m

I am trying to make a 500 m buffer for my polyline layer. Unexpectedly, I receive buffer varying from 650 to 670 m, depending on location. As many resources recommend to use UTM before making a ...