A region enclosing a point, line, or polygon at a specified distance.

learn more… | top users | synonyms

1
vote
1answer
22 views

MapInfo incorrectly counting lines intersecting a buffer

I made a buffer for all objects on start and end nodes of polylines then disaggregated them. I then used update table to derive the number of lines intersecting: However this appears to be ...
1
vote
1answer
245 views

SQL Data: How to draw circles with a radius based on lat/long data in DB

I have a . sqlite file with many columns, two of those columns being lat and long. I've been searching around for a bit now (don't think I want to be using BuildCircleMbr from spatialite?) but I'm ...
1
vote
0answers
44 views

Multiple entries in attribute table for multiple buffers using ArcGIS for Desktop?

I am using ArcGIS 10.2.2 to draw 500ft buffers around a group of 133 bars. The numerous buffer tools all produce a single entry in the attribute table for the collected group of buffers instead of ...
1
vote
1answer
472 views

ArcMap 10.1 - Tabulate Area tool “doubling up” for Overlapping Buffer Zones

This question is related to a previous question I asked: Raster Version of Spatial Join (one to many) I used the Tabulate Area tool to crosstabulate values between an overlapping "buffrast" raster ...
-1
votes
1answer
29 views

Buffering algorithm [closed]

Does anyone know the algorithm of buffering? I had difficulty in drawing buffers. So I tried many values to acquire 1km buffer. I found value 0.008966 produces 1km buffer. Then I calculated inverse ...
2
votes
0answers
24 views

Ontario Buildings Data

I am looking for a buildings layer for Ontario, particularly the Chatham-Kent area to properly assess setback for wind turbine development in the region. Currently, I am utilizing the buildings data ...
4
votes
3answers
322 views

Buffering with physical barrier using ArcGIS for Desktop?

I don't think it is possible, but I'm looking for a way to stop my buffer at a certain physical barrier. For example, I have point near a river and I'm creating a buffer around my point that is ...
2
votes
1answer
127 views

Separate a polygon in different polygons depending of the distance to another polygon

I have a reference polygon "R", and others polygons (in grey). I want to separate each grey polygon in multiple polygons, depending on the distance to R with different Buffers : - The red line is R ...
2
votes
0answers
20 views

Distribute Hotel Beds According to Population Density in Buffers using ArcGIS for Desktop?

I am running an ArcGIS for Desktop analysis where I am plotting competing hotel facilities and then distributing their beds in a 5-mile buffer around the site. I would like to distribute the beds ...
0
votes
0answers
41 views

Intersecting Overlapping Polygons Individually in ArcGIS

Map Layers: -Census Tract Shape File w/Population Data -Set of Store Locations with 5 Mile Buffers (Significant Overlap Between Buffers) I have create feature layers for both and I am trying to ...
1
vote
1answer
44 views

Sum a field in buffer intersection

I have looked and do not see this answered in any other discussions. Purpose: Site suitability analysis for brewers spent grain processing facility Method: Locate intersecting buffers with greatest ...
1
vote
1answer
36 views

Buffering a PointGeometry in arcpy only returns a line?

I am trying to buffer a PointGeometry object in arcpy to a Polygon geometry object with ArcGis 10.2. The PointGeometry object is in lat/lon WGS84 coordinates and as far as I understand, I can only ...
1
vote
0answers
28 views

Way to split and create buffer space between polygons in QGIS or ArcMap

After performing a feature extraction of rooftops, some of my buildings have been joined together as one polygon. I want to split these large polygons so that each new division is only covering one ...
3
votes
2answers
284 views

Performing statistical analysis of buffers?

I am doing a buffer analysis of incinerators and looking at the output areas within those buffers, is there a way of doing a statistical analysis of several buffers to see if there is a significant ...
2
votes
1answer
206 views

Creating buffers that will not overlap in QGIS

I am dealing with a .shp with a number of points in it. The distances between points range from ~300m to 5km. I wish to create a 1 km buffer around each point with as little overlap as possible. Each ...
2
votes
1answer
216 views

IBufferConstruction create buffer with different geometry types (C# ArcObjects)

I am using the following method in C# public void ConstructBuffers ( IEnumGeometry pInputGeometries, double distance, IGeometry CollectionpOutputBuffers); to create buffers. In the ...
1
vote
0answers
20 views

How to calculate average raster values around a set of points (ArcGIS or R) [duplicate]

I have a 30-m elevation raster as well as a set of points that overlay the raster. For each point, I want to calculate the average elevation within a 5-km radius of the point. One way I was ...
1
vote
1answer
107 views

How to creat multiple rings between two circular buffers?

I am working with mathematical-ecological modeling and I am also a new user of QGIS Software. First I am creating 3 circular buffers with same center (shape center) covering a region with roads (shape ...
7
votes
1answer
4k views

Understanding QGIS buffer tool units?

I have been trying to figure this out for a couple weeks now and have had no luck getting the buffer tool to accept anything but degrees as units of measure. I have found lots of stuff saying the ...
12
votes
4answers
3k views

How to create one-sided buffers or parallel lines in PostGIS?

I'm looking for a way to create so-called one-sided buffers or parallel lines in PostGIS. Example: 1. buffer, 2. one-side, 3. both-sides I've found some discussion on the mailing list from 2009 and ...
11
votes
4answers
7k views

Creating square buffer around point feature using ArcGIS for Desktop?

I would like to create a square buffer from a point feature but I do not understand the code that goes into it. Similar questions have been asked on the forums.esri website but that was over 10 ...
2
votes
1answer
87 views

QGIS - Create buffer in meters

I'm very new to the GIS world, so my problem could be very stupid, but I'm going to try anyway. Objective Given a list of coordinates in longitude/latitude, stored as a .csv file, I want to create a ...
4
votes
3answers
117 views

How to compute the outline of multiple tracks?

I have multiple gps tracks with depth data gathered from the lake. The tracks are overlapping/intersecting. I want to get an outline polygon. I have a multi-line shp. I've tried to diffuse it in qgis ...
0
votes
0answers
46 views

how to remove a point or polygon in shapely python

I want to place minimum number of sensors(circles) to cover a maximum area(polygon). I am using "Shapely",python module. I want to know if a sensor i.e a point buffer inside the range of the other ...
1
vote
1answer
30 views

How to adjust the projection of a buffer?

I'm using ArcGis 10.1, and when I do a buffer at a point, the created buffer do not match the dimensions I asked for. For example, in the creation of buffers, in the option 'linear unit' I choose 50 ...
0
votes
1answer
41 views

Creating a 10-mile radius buffer zone that averages a variable in my shapefile?

I´m trying to create a "buffer zone" for every polygon in my shapefile, which will identify a 10 mile radius around the centroid of each polygon, and calculate the AVERAGE "demand for services" (one ...
0
votes
0answers
55 views

ArcGIS Circle Buffer

I am stuck, trying to draw a simple circle buffer using ArcGIS. Here is how I set up my base map: dojo.require("esri.map"); dojo.require("esri.tasks.servicearea"); dojo.require("dijit.dijit"); ...
3
votes
1answer
145 views

How to create a buffer on a linestring with varying or increasing/decreasing width

I want to buffer rivers/streams for a topographic map. I'm using a PostgreSQL/PostGIS database. Usually, I create buffer with ST_Buffer with a constant width. For example, the width of a river buffer ...
1
vote
1answer
106 views

What is the minimum buffer zone to get a certain amount of points within the zone?

I have one map with lines and another map with points. I want to find the distance of the buffer zone to be such so the amount of points that are in the buffer zone to reach a certain number. For ...
2
votes
1answer
260 views

Python add-in won't buffer from output layer

I have a simple add-in script for Arcmap 10.1 to create a toolbar, select a layer from a drop down list of the current layers in the project, buffer that layer four-miles, then use the resulting ...
-1
votes
1answer
44 views

ST_buffer display creates big circle [closed]

$result = pg_query("SELECT ST_Astext(ST_Buffer(ST_GeomFromText('POINT( 80.7605 7.67833 )'),1))"); ST_buffer display creates big circle..
2
votes
1answer
123 views

Buffers with Varying Distances around a Set of Points

I have set of points in one shapefile and I have a table with a unique identifier that matches each point. I want to make a buffer around each point, according to the radius that I have specified in ...
1
vote
1answer
38 views

Buffer from Field using Different Unit

Is it possible to create a buffer polygon using an attribute field which is in different units than the feature class coordinate system? Example: I have a field that stores distances in miles (double ...
2
votes
1answer
23 views

Applying distance/area dependent procedures in geographic coordinates over large areas?

I'm currently doing some niche modelling with data in geographic coordinates spanning all of Latin America. I am using R for my analysis. Some of the tasks I have to perform are area/distance ...
1
vote
0answers
34 views

How to calculate the area of overlapping buffers within a single layer

I am very new to GIS, so don't know if this is EXTREMELY easy or impossible. I have GPS coordinates for stores (about 15000) for which I have created a buffer zone around each store location ...
1
vote
2answers
74 views

How to split a (road) buffer using the centerline?

I have a road centreline dataset which I have buffered using the road width. I used the standard QGIS buffer tool. I realise for my analysis I actually need to split the road buffer in half and ...
0
votes
1answer
39 views

WFS Filter Buffer around a point

I'm trying to make a buffer around a geometry (point/s,linestring,etc) using WFS queries without luck. This is what I've been doing: <ogc:Filter> ... <ogc:Function ...
2
votes
1answer
36 views

How to do the overlap detect for buffered lines

We have almost 50000+ lines which we want to remove a line if it is too close to the other. So we tried to do a buffer for two line, then check if the buffer area are overlapped. I wonder if there ...
0
votes
1answer
45 views

QGIS convert polyline to fixed width polygon

I have a shp file of polylines for trails, and I need to convert them all to be polygons that are 8 ft wide (4 ft from the center of each side of the polyline). I tried a following a few other posts ...
0
votes
0answers
48 views

Is it possible to use custom (non-circle) buffer shapes?

I have a shapefile containing points. I'd like to replace each point by the same shape, centered around the point, like the "Buffer" tool with shapes other than circles. How can I do that?
2
votes
1answer
134 views

How to load a memory layer into map canvas an zoom to it with pyQGIS?

I would like to load a vector memory layer into the map canvas with pyQGIS. Background is, I create a memory buffer layer around point data. While iterating the points I would like to visualize the ...
1
vote
2answers
672 views

QGIS - Continuous buffer image [Heat Map]

Is it possible to have the representation like the one the heat-map like the figure below using QGIS? The way seems to use buffer options, but I do not know how. Does exist any plugin that helps? I am ...
0
votes
0answers
26 views

v.buffer angular buffer doesn't take all the polygons into account

I am trying to create an angular buffer around building footprints with the v.buffer command (QGIS 2.2). There is no error message, but the algorithm doesn't take into account all the buildings. This ...
1
vote
3answers
89 views

Create buffer in Metres

I want to create a buffer in meters around points in Europe. But I cannot find a proper CRS for Europe that is in meters instead of degrees?
1
vote
0answers
52 views

How to Buffer with Dissolve ALL on very large polyline dataset? [duplicate]

So I have a fairly large polyline network covering a decent chunk of North America, containing just shy of 900,000 table records. I want to do some very simple "GIS 101" kind of processing to it -- I ...
0
votes
1answer
54 views

Using the buffer tool in ArcGIS 10

I have a map that has a 12 mile buffer round it already. I have created a buffer inside the original 12 mile line (using a negative value of 9). Is it possible however to stipulate that the new buffer ...
0
votes
1answer
66 views

Generating buffers in a automate way

I would like to creat buffers in a automate form and no matter the way (e.g. script, batches and etc) I am asking if anybody here knows how to do it or if are there scripts ready to do it. My ...
0
votes
0answers
41 views

Creating multiples buffers (or rings)

I would like know how could I creat and automate with a batch multiples buffers (or rings) between two cut buffers where is crossing roads. I creat rings using the attribute table but I can't ...
0
votes
2answers
82 views

isolated polygons selection (not donuts)

I'm exploring a few different options for this process and I'm unsure what would be most effective. I'm trying to find all isolated, non-intercepting polygons in the same layer (not to merge). Most ...
3
votes
3answers
1k views

Is it possible to create multiple buffers using QGIS?

I'm new to QGIS and have no programming skills, is there an easy/uncomplicated way to create multiple buffers around a line feature.