Any of a set of two or more numbers used to determine the position of a point, line, curve, or plane in a space of a given dimension with respect to a system of lines or other fixed references.

learn more… | top users | synonyms

2
votes
2answers
104 views

ArcGIS: Create polygon using file containing point coordinates

I have a text file containing the projected coordinates of the points that define a single polygon. The X, Y coordinates are separated by Tab Is there a tool in ArcGIS similar to "Add X,Y Data" in ...
1
vote
2answers
24 views

Drawing the boundaries on coordinate file and classifying the points

I have imported the data on coordinates in Excel which are classified into 3 types: Class 1, Class 2 and Class 3. When I Add delimited text layer, I get the following output: I have two basic ...
1
vote
0answers
42 views

My map is little bit off

I am pretty new in GIS things and i have been learning how to use QGIS. Most of the maps are fine, but yesterday I went to GIS center at my University and I got the maps of my country that I will be ...
2
votes
1answer
30 views

Atributing fields in arcmap and excel

How do I populate a field in ArcMap (and Excel) with only a specific part of another field's attributes? For example: I want to populate the LATDEG field with only the degree part of a latitudinal ...
2
votes
0answers
34 views

Getting XY screen coords from ArcScene 3D point using ArcObjects?

I already know how to convert screen point (X,Y in pixels) to 3D point: ISceneGraph pSceneGraph = m_pSceneHookHelper.SceneGraph; IPoint pPoint; pSceneGraph.Locate(pSceneGraph.ActiveViewer, X, Y, ...
5
votes
1answer
59 views

How often does Google change the geo-coordinates for a given address?

I geocoded the address "50 Hurt Plaza Southeast, Atlanta, GA 30303" twice. Once on July 28th, 2014 when I got the coordinates: (33.754208, -84.387272) And again today, August 18th, 2014, and got ...
2
votes
3answers
47 views

How to convert PCS based point X/Y into GCS Lat/Lon using ArcObjects

There are so many permutations of questions I've tried to find the answer to my question from various sources, but I have yet to actually find an answer the way that makes sense to me (and works). ...
-1
votes
1answer
30 views

Buffering algorithm [closed]

Does anyone know the algorithm of buffering? I had difficulty in drawing buffers. So I tried many values to acquire 1km buffer. I found value 0.008966 produces 1km buffer. Then I calculated inverse ...
2
votes
1answer
26 views

WorldWind wms services show reversed coordinate in ArcGIS Desktop

I'm adding WorldWind wms services (http://data.worldwind.arc.nasa.gov/wms?) to ArcMap (ArcGIS 10.2.2) but maps are misplaced, looks like they have reversed coordinates (as explained here: ...
5
votes
1answer
74 views

What kind of coordinates are this ones?

I have to map a point using this coordinates: 38 R MF 18852 15799 I can't understand the coordinate system. For sure '38' is the UTM zone number and 'R' is the designation (indicating southern ...
1
vote
1answer
21 views

Finding coordinates of the image corner

I have a .bmp image with a map. For creating image i used a Ingeo 4.4 and function MakeImage() What i know: Height an Width of bmp image dpi Map Scale Image Center's coordinates in meters. What i ...
1
vote
1answer
13 views

How can I shift raster layer for making cloud-shadow mask?

I want to make cloud shadow mask in QGIS. I have raster cloud mask and I have to shift it by X,Y coordinates. Is there any easy solution? Many thanks, Helena
1
vote
1answer
55 views

How do I convert Geo-Coordinates to Pixel-Coordinates on a Map?

I have an image file that is a Robinson Projection Map of the world. I have a list of geo-coordinates. I would like to find the pixel-coordinates on the map that correspond to my the geo-coordinates I ...
1
vote
1answer
56 views

What UTM like coordinate system is this?

I have this set of coordinates: 4622580.00000, 503749.00000 They should roughly correlate with 51°01'39.4"N 13°44'44.2"E in Dresden, Germany. At first I thought they might be UTM, but that puts me ...
3
votes
3answers
200 views

How to export polygon coordinates to CSV (not WKT)?

I am new to QGIS, and I am now trying to export polygon coordinates from a shape file to a csv file, but so far all my attempts have failed. I have found numerous questions and answers about this, but ...
0
votes
2answers
50 views

Field calculator fails when computing First X coordinate in ArcGIS10

I have this line in python to compute First X coordinates into the Field Calculator from each polyline: !Shape!.firstPoint.X Then, when I inspected the attributes I see this rare thing: You may ...
1
vote
1answer
65 views

How to calculate Distance, Azimuth and Dip from two XYZ coordinates

I have two XYZ coordinates and I would like to calculate the Distance, Azimuth and Dip between them. I have come across a similar question on this site that calculates it the other way around (with ...
1
vote
2answers
30 views

Identifying my coordinates from external datasource

I'm working with data received from an agency outside of my office and two columns in the dataset are labeled 'CompX' and 'CompY'. Here is a sample set pulled from the spreadsheet: ...
0
votes
0answers
39 views

Extracting shape point coordinates from polylines in MapInfo

My question follows from Coordinate extraction in a different projection in MapInfo . I now have WGS84 begin and end coordinates for the polylines(which are in british grid coordinates) How do I now ...
2
votes
2answers
345 views

How likely is it that Smartphone Camera GPS coordinates are wrong?

According to the coordinates printed directly on this photo of my late son Kelvin here: https://www.dropbox.com/sc/w6tvwuvbosuh9rk/AADzT-3vDXcFQ9LnKK1BYMZUa ...and the Exif data from the .jpg: ...
0
votes
1answer
37 views

How to create GoogleMaps/OSM hyperlink for given bbox coordinates

I have extracted the bbox coordinates from a shapefile and want to create a hyperlink for google maps respectively OSM. When you click on the hyperlink the map should be zoomed to the bbox extend and ...
6
votes
2answers
857 views

What are the coordinates of the mysterious hole in Siberia?

I am interested in taking a Google Earth aerial view of the mysterious hole recently discovered in Siberia and perhaps doing some hydrological analysis of the area in a GIS. However, there appears to ...
1
vote
1answer
57 views

Calculating distance between two sets of Decimal Degree coordinates?

I have coordinates in decimal degrees e.g: point A:Lat,Lng(5.317101667,-2.023303333) and point B:lat,lng(5.317093333,-2.023318333). The altitude in Meters at Point A is 11m and the altitude and Point ...
0
votes
1answer
32 views

Coordinate extraction in a different projection in MapInfo

I have a .TAB file of polyline objects in British Grid Coordinate. I need to extract the end points/nodes of each polyline and find their latitude/longitude (WGS84). Would really appreciate some ...
2
votes
0answers
24 views

Choosing the map scale (1:nnn) for the given raster dimension

Starting points: let define the raster image size, say: 1800x900 pixels I want draw my own raster image map - by drawing polygons e.g. like "draw line from pixel with coordinates x100y100 to pixel ...
1
vote
0answers
31 views

GRASS and r.viewshed

I'm trying to run the r.viewshed command using co-ordinates held in a .csv file I imported using v.in.ascii. It has over 200 rows and I'm looking to run viewsheds from each line, without doing it ...
3
votes
2answers
81 views

Can't find correct coordinate system: UTM83 Zone 15 forcing input in meters; need it to be read in feet

Forgive me, I'm a CAD person, and am very new to GIS. I've searched google and this site extensively for an answer, with no luck. My problem is that I was given a large number of sistered Raster ...
1
vote
1answer
56 views

Translate coordinates in GeoJSON export

I am wondering if there is a way to apply a translation in coordinates for a GeoJSON export. Currently, there are negative coordinate values in my export, which I cannot have. I am trying to use ...
1
vote
1answer
45 views

Correcting coordinates of CAD drawing imported into ArcGIS?

I am having some issues with some CAD drawings that I have imported to ArcGIS. I have a number of CAD drawings where by the features within the drawing have an error in their coordinates. For example, ...
-2
votes
1answer
42 views

How do I get the Coordinates of a shapefile into .csv [closed]

I have followed all the instructions on this site, but my output always shows Area, and Perimeter of each polygon. Am I missing something? Should I be changing a setting somewhere to select ...
0
votes
1answer
16 views

Can I upload an LPA file (Long Profile) to QGIS

I have a .lpa file that I'd like to upload to QGIS - Can this be done and if so, how? Thanks!
1
vote
1answer
43 views

Creating a line from lots of easting/northing co-ordinates

I have hundreds of easting northing points which I need to join as a single line to show a route. How do I import them and get QGIS to automatically turn them into a line?
0
votes
0answers
26 views

Is there a way to retrieve/query country data from a shapefile programmatically using map coordinates in GeoTools?

I am using Geotools to parse and draw a shapefile. Now; when I draw that map I receive coordinates with this bit of code for my Flight Line button. void selectFeatures(MapMouseEvent ev) { ...
2
votes
0answers
30 views

Problem with finding point within the box in MongoDB

I'm doing a search within box. It works perfect except only one situation. Let me describe it. Suppose the point has coordinates: (lng:-155, lat:19) If we have box: sw - (-170, 10), ne (29,69) that ...
0
votes
0answers
10 views

Display coordinate references in Geotools

I'm using this library to finish my final project and i have to say I'm no familiar with the maps worlds. My question is if geotools has a method to show automatically the coordinates references in ...
0
votes
0answers
38 views

Drawing Line on existant Shapefile in Geotools

I have a shapefile that is opened and looks as such: Now I am attempting to draw a line from two points I click on that map; however the code they give for the QuickStart.java example is ...
2
votes
1answer
94 views

Calculating countries flown over on flight path

Say I have two airports given. I can then get their coordinates. Now that I have the beginning and end coordinates I can draw flight-path from the two locations. Now my question is that given two ...
0
votes
2answers
40 views

Arcpy: calculating a field based on feature class geometry, eg 'if FC ==“POINT” calculate xy coord

I have a script that populates new fields based on user input. I would like it to also add the XY coordinates in DD if the Feature Class is a point feature, else, it moves on to the next command. I ...
0
votes
2answers
44 views

Looking for lat/lon for county seats

I'm currently designing a map for methamphetamine labs in my state. Ideally what I need is the center lat/lon coordinates for each county in my state or the lat/lon coordinates for each county seat. ...
1
vote
1answer
202 views

How to get LatLng array from geoJSON Layer in Leaflet?

i need to hand the latlng coordinates from my phpPostGIS-served geoJSONLayer as an array over to a new added HeatMap Layer. L.geoJSON has an build-in option: coordsToLatLng( coords )" and a static ...
0
votes
0answers
54 views

How to write a signal for 'QgsMapCanvas::xyCoordinates (const QgsPoint & p)'

I am very new to QGIS and python. I am writing some python codes and I want to capture the x,y coordinates when the cursor moves on the map layer. (same as the coordinates show in the QGIS status bar) ...
1
vote
2answers
91 views

How to draw a square from 2 coordinates?

I have a CSV file with the following output id, x min, y min, x max, y max, value 1 , 0 , 0 , 100 , 100 , 5 2 , 0, , 100 , 100 , 200 , 10 3 , 100 , 100 , 200 , 200 , 15 4 , 100 , 0 ...
0
votes
1answer
54 views

How to access the map coordinates show in QGIS status bar?

Is there a way to access the map coordinates show in qgis status bar? I found only this, iface.mainWindow().statusBar().currentMessage() But I know it's not the way. Or is there any way to capture ...
1
vote
2answers
114 views

Changing layer extent to decimal degrees?

Using ArcMap or ArcGIS 10 ... In the photo below, you can see my extent is in meters while my projected coordinate system is in decimal degrees. How can I convert my layer extent to decimal degrees? ...
0
votes
1answer
90 views

How to convert gps receiver native format to google lat long or XY format

I have received some GPS co-ordinates in the following format like - "17267690N 078279340E".. How to convert the co-ordinates to show it on Google map.
0
votes
3answers
90 views

Get Coordinates of selected item on map using ArcGIS Engine

I have IFeatureSelection. Then select from it items by QueryFilter. How can i get coordinates of selected item? (If there are more then 1 object, then select first)? Selected item is Point in ...
0
votes
0answers
33 views

Plot coordinates and draw a heat map on a GADM map

I am trying to plot insect Resistance data collected at multiple sites on a spatial GADM map. My data looks like this: I would like to build a heat map (with increasing resistance=increasing ...
1
vote
1answer
80 views

Get Coordinates of Voronoi Polygon Vertices [duplicate]

Is there any chance to get the exact coordinatas of the voronoi polygons? I am using Qgis software and I have the "center" (redpoint) of the polygons and I would like to export the polygons corners ...
3
votes
2answers
768 views

What kind of coordinate system is this?

I have a csv with a list of the world sea ports and their coordinates. The coordinates are in this format: 5234N 00226W How can i convert this to decimal Latitude / Longitude ? Data source
2
votes
0answers
36 views

Decimal degree coordinates: how many decimal places to use for …? [duplicate]

When using coordinates in decimal degrees, how many decimal points actually make sense? For example, say one is producing a table of locations of base camps in a report, there's no point in ...