0
votes
0answers
7 views

Account for bridge overpasses in a ground DEM to allow for water flow under the under the overpass

I have a bare earth DEM made from lidar data (A). It works well and has passed all accuracy tests. It is used in storm surge models. The problem we are having is on underpasses. I need to allow water ...
0
votes
1answer
20 views

QGIS 2.2: GDAL Grid (Interpolation) Error

As much as i understand Raster -> Analysis -> Raster (Interpolation) can provide me with a terrain file out of a shape file with a Z coordinate. I select the input and output file and a Z field. It ...
1
vote
0answers
36 views

How to get Drainage Divide and Streams from DTM

Does anyone know how you can get a map like this attached, having the digital terrain model? I'm sorry, but I do not know what is the exact technical term in English for them. I hope you understand ...
1
vote
1answer
31 views

Find minimum elevation along a polyline and return xy or point?

Using ArcGIS 10.1 and Python IDLE 2.7.2... I'm trying to find the minimum value of a polyline with a raster layer and turn that LOCATION into a point. I put everything together in model builder, but ...
2
votes
1answer
32 views

Interpolate Temperature Using DEM

I want to "co-interpolate" temperature with DEM. I have SRTM 90m aggregated to 1km and I want to "co-interpolate" my DEM with points with temperature data. How do I do this? I am using ArcGIS 10.
1
vote
0answers
26 views

How do I split a DEM at a certain elevation?

I have a DEM that includes bathymetry and terrain elevation and I would like to split it at the coastline. Ideally, I would end up with one tif that's land and one tif that's bathymetry. I have ...
0
votes
0answers
15 views

DEM/DSM from contour lines and slopes

I want to create a DEM with as much detail as possible. The problem is, that the area contains several (manmade) slopes. I got contour lines and lines that mark the location of the slopes, but no ...
3
votes
1answer
36 views

How to give elevation information to a polygon feature class using existing TIN file ? (geological mapping)

I'm an ArcGIS 10.1 user. My issue: I have a printed form of a map which depicts geological bodies being surface rock occurence. Additionaly, there are elevation contour lines. I digitized the map by ...
1
vote
0answers
27 views

What steps does SAGA GIS take when calculating Topographic Wetness, specifically when handling depression filled (by ArcMap) DEM

I am a grad student involved with hydrological modeling. In the model I work on, we are calculating the Topographic Index (TI; without transmissivity - or set to 1) using Quinn's MFD algorithm. We do ...
2
votes
1answer
42 views

Elevation maps from point clouds: TPS vs. what other methods

In the reply to another question, @thehealingprocess refers to "...a comparison of interpolation methods for interpolating elevation maps from LiDAR clouds, and in almost all scenarios thin ...
2
votes
0answers
26 views

When computing flow direction, the D8 algorithm is used - are there major differences if others are used?

I am a student working with Hydrological models. Within these models we can route water across a DEM (within a delineated watershed or just within an un-delineated DEM) using many different flow ...
1
vote
1answer
39 views

QGIS DEM (Terrain models) Mode Slope creates wrong data [duplicate]

I have a DEM raster file downloaded from the USGS site. The file can be downloaded here. I am trying to create a slope raster in percent with the DEM tool in QGIS. The GDAL command is the following: ...
3
votes
2answers
184 views

How to create 3D water depth with ArcScene?

I was trying to visualize flood depth in 3D using ArcScene. What I had for this purposes are: high-resolution DTM of the valley orthophoto and Raster with flood depth information. I have draped ...
1
vote
1answer
44 views

Fill sinks error in arcHydro

I am working on a project that is modeling runoff at a county level. The DEM used is lidar derived and has a 5 ft resolution. The general workflow I am flowing is Sink evaluation Sink Selection (to ...
1
vote
3answers
76 views

Calculate Number Of Pixels Visible From Pixel

I am looking for a way in which to take an input DEM and create an output raster whose pixel's value is the count of pixels "visible" from that location. I use ArcGIS with Spatial Analyst, but also ...
-1
votes
0answers
21 views

Slope function in ArcMap gives weird outputs [duplicate]

I try using the slope function to calculate the slopes of my ASTERDEM. The output contains only three value ranges: 0, 89.59-89.99, 90. I tried redefining the project system, but it still gives weird ...
1
vote
2answers
55 views

What are the ways we can control the quality of a DTM?

I imagine that for DTM obtained from Stereoscopic procedures or interpolation from a set of topographic points a comparaison with the original data can help, but what for DTM obtained from Remote ...
1
vote
1answer
48 views

Where can I obtain 3D data for Singapore?

I am looking for providers of 3D maps/models of Singapore. This might be either from photogrammetry/laser techniques or based on a DEM + building footprints/landuse with a height attribute. Is any ...
2
votes
0answers
30 views

Define uphill side of roads and buildings

I have a big raster of a mountain region and I need to extract the uphill side of roads and buildings, from these elements to the pick of mountains. For a road I know the uphill side changes in ...
0
votes
1answer
30 views

How determine data type of points in geotiff DTM?

I have some DTMs in geotiff files. I need to read them in C# and I've decided to use libtiff for that purpose. After some investigations, I've found that there are tiled tiffs, so I use ReadTile ...
3
votes
2answers
81 views

Merging DEMs of different grid size

I'm trying to merge two grids with different cell size. One has a cell size of 10m and the other 50m. The 10m one covers a subarea of the 50m one. I know that the most accurate one is the 10m one and ...
0
votes
1answer
39 views

DEM difference looks like a hillshade

I wanted to find the elevation difference between 2 DEMs. When I got the data, I had to georef one image and had to aggregated it too because their cell values do not match. I also tried to resample ...
3
votes
2answers
123 views

Creating DSM and DTM from a LAS using a freeware solution

Is it possible to export a surface and terrain model files from an aerial, LiDAR point cloud (LAS) set? I am using SAGA GIS for very basic operations, but I couldn't find this option (and I have a ...
0
votes
0answers
27 views

r.shaded.relief plugin on a DEM layer

I loaded a raster digital elevation map from the DEM explorer website. I defined the projection and created a mapset. I then loaded the raster file into GRASS with the r.in.gdal plugin to create a DEM ...
0
votes
0answers
17 views

Adding a Z Unit [duplicate]

I'm struggling with the Z Unit conversion of some data. Both the NHD data and my DEM are in a GCS with Decimal Degrees. These data sets project perfectly on the fly, but after I adjust the Z Unit of ...
0
votes
1answer
42 views

Adjusting Z Units on a DEM

I am learning how to use ArcHydro and attempting to change the Z Units because I get a warning message saying the Spatial Reference Doesn't Match. The DEM was in Meters, and I adjusted the Z Unit to ...
5
votes
7answers
364 views

Open source tool to convert a DEM to a 3D model

I would like to convert a DEM (Digitial Elevation Model) file (e.g. from SRTM) into a 3D model that I can then edit with regular 3D modeling tools (e.g. Meshlab/Blender/etc.). However I'm using Ubuntu ...
0
votes
0answers
46 views

Creation of drainage ditch in ArcGIS - Line with a certain slope

I have a digital terrain model and a list of problematic points, in which water accumulates. It's not important how I obtained these points (by observing or some algorythm). I would like to use these ...
2
votes
2answers
100 views

Create Contours From a DEM without 3D or Spatial Analyst

I'm wondering if there is a way to create contours from a DEM using ArcGIS without 3D or Spatial Analyst Extensions. I know that there are a few questions out there pertaining to this (How to create ...
2
votes
2answers
81 views

How to produce a CSV file from .tif file with elevation data? [duplicate]

just want to ask, I have a .tif file that contains all the elevation of a country. How can I convert that to a CSV file that contains x,y,z values where x and y are the latitude longitude respectively ...
4
votes
2answers
197 views

how do you identify ridges on an elevation raster?

I was wondering whether anyone might be able to tell me in layman's terms how to extract or differentiate between ridges and hilltops from 10m elevation data using ArcGIS 10.1? Any advice would be ...
0
votes
1answer
51 views

Terrain Accessibility map using GIS (ArcGIS or QGIS)

I need to make an accessibility map showing the walking distance based on the terrain and availability of road networks, could anyone point me in the right direction where i could learn to do so. ...
0
votes
0answers
20 views

QGIS export DTM with x.000 coordinates

I'm new at QGIS and would like to solve the following problem: I import points and breaklines and interpolate this data. Afterwards the generated DTM is exported to a new file (this works). Now I ...
4
votes
1answer
57 views

What are the most efficient Geographic Weighted Regression packages?

What are the most memory efficient open source packages for calculating a geographically weighted regression (GWR)? I am in a situation where I need to do a geographically weighted regression on a ...
0
votes
0answers
35 views

GDAL - least cost path analysis height data

I would like to use Pythons GDAL bindings to find the least cost path through an array and then show the route on top of the original array. I am using DEM data and would like the slope to be taken ...
1
vote
2answers
77 views

DEM/Raster Peak and Valley identification and/or elimination (non-generalization)

I am an curious is there is a tool or process that can identify and/or eliminate obvious peaks and valleys in a DEM. I have looked into smoothing but I am interested in keeping the original sharpness ...
8
votes
2answers
211 views

DEM Elevation Units

I'm fairly new to the GIS world, and have a quick question. I'm currently using 10.1. I do not know much about rasters, so does transforming a DEM from one projection to another automatically convert ...
5
votes
1answer
204 views

When to use IDW vs Kriging Interpolation for DEM creation?

I'm trying to create a DEM using point data spaced very regularly about 10m apart. The area I am interpolating is an educational facility with many flat parking lots and football fields but still has ...
0
votes
0answers
42 views

Display DEM in WPF application

In my application which is based on .net4/C#/wpf, I need to display a decent sized terrain file (eg. GeoTiff). It is an elevation file which should be viewed in 3D. The user should be able to draw ...
0
votes
0answers
45 views

Estimating sunlight hours from slope, aspect, and latitude

I'd like to estimate annual sun hours (or insolation, or solar radiation) for 4 points, 1 each on the four sides of the summit of a hypothetical flat-sided mountain. I have slope and aspect for each ...
1
vote
1answer
224 views

How to Create Cost Surface Raster for Least Cost Path Analysis?

I have a DEM raster and would like to carry out a cost path analysis. Among other factors such as slope, proximity rivers etc. I would also like to take elevation into consideration. According to ...
0
votes
1answer
29 views

generate subcatchment starting from a DTM [duplicate]

I would like to know if there is a plug-in in Quantum GIS, which can help me to generate subcatchments starting from a DTM. Thank you very much!!!
3
votes
1answer
114 views

Create DEM from cartosat stereo pairs?

I have two carstosat stereo pair images. All i need to do is to extract DEM from those. So, i tried it doing with OSGeo4W. but i didn't succeeded in it. So IS there any other softwares or opensource ...
3
votes
1answer
52 views

ArcMap 10.1 drawing an irregularly shaped boundry polygon around a set of LAS point data?

I am working with a set of LAS data which is irregularly shaped, picture a starfish as the point coverage, surrounding the starfish may be water on one side, may be more land elsewhere but no points ...
2
votes
1answer
50 views

NASA ASTER DTM - what is its datum? What are the elevations relative to?

I have downloaded some data from http://asterweb.jpl.nasa.gov/gdem.asp I would like to relate the elevations to some coastal data which is estimated to a specific ordnance dataum. Can anyone tell ...
7
votes
3answers
182 views

How to get the subbasin area of each specified river segment?

I have a DEM file of one district, and I have used those following tools in spatial analyst tools in ArcGIS 10.1 to get files related to the original DEM file: Fill Flow direction Flow accumulation ...
0
votes
0answers
37 views

qgis - slope from DEM - errors due to projection and oversimplified 'z factor' [duplicate]

I'm trying to generate a slope raster from a DEM raster. It seems there is a pretty significant error due to the 'z-factor' option. I'm fairly new to this, but some other posts and responses ...
0
votes
0answers
70 views

determine the catchment area from dem or hillshade [duplicate]

I want to determine the catchment area of river from hillside. Is there a plugin that I can use in qgis ?
1
vote
1answer
47 views

How to: script convertion from SRTM to 3D printable file?

Given a STRM3.tiff file as input. How to convert this STRM.tiff file into a 3D printable file ? which I may load into most 3D printers' sofwares. My objective is to print some terran, lunar, or ...
0
votes
0answers
31 views

How to generate GML by extracting heights from DEM?

I am trying to generate GML using satellite images for geometries of various objects, and I propose to use DEM of the corresponding area in order to extract heights. I already have a piece of ...