0
votes
4answers
46 views

Using Arcpy, how can I determine min and max elevation from a raster DEM layer within my current extent?

Using Arcpy, how can I determine min and max elevation from a raster DEM layer within my current extent? I'm currently using Data Driven Pages to centre the layout on each feature extent. I need to ...
2
votes
1answer
66 views

Obtaining average value around polygon in raster for different cross sections?

I have elevation data in a raster, river (blue line) and the flooded area (black polygon) as shown in the image below: I want to find the water depth in the flooded area (inside the black polygon). ...
0
votes
1answer
33 views

What dem data are Flex Viewers using to create elevation profiles?

I asked a similar question a year or two ago here: Can Elevation Profile data in Arc's Flex Viewer 3.0 be exported? which appears to not have an answer. Another question regarding the Flex Viewer ...
3
votes
1answer
78 views

How to obtain a DTM/DEM from DSM

I need to obtain a grid of bare ground elevation (removing all edifices, trees, roads and man-made elements) for quantitative geomorphological analysis from a high resolution (1 m) DSM obtained by ...
1
vote
0answers
30 views

DTM Extraction/Smoothing in ArcGIS

I have an .las file, intended to be a DTM (bare earth) that I generated from a photogrammetry software package that has come out just a bit too lumpy. I now have the license for that software tied up ...
3
votes
2answers
77 views

How to query DEM elevation values in a web application based on cursor/click point location?

I work for a city government that has LiDAR derived DEM rasters which we would like to make accessible to other departments in the city. The problem is that many departments don't have anyone with ...
1
vote
1answer
23 views

Combining several rasters before r.surf.contour?

I have been trying to generate an elevation model from contour lines using first v.to.rast.attr and then r.surf.contour. Generally, it works pretty well, execpt for one issue. My data contains a lot ...
1
vote
1answer
44 views

Make a Ground Mask raster with the Greater Than tool (DEMs are generated from LiDAR)

I'm trying to see if I can replicate the Esri solar suitability site example from this article. I fail on the creation of the binary ground raster. I have made a Bare Earth raster from LiDAR ground ...
1
vote
1answer
67 views

Find minimum elevation along a polyline and return xy or point?

Using ArcGIS 10.1 and Python IDLE 2.7.2... I'm trying to find the minimum value of a polyline with a raster layer and turn that LOCATION into a point. I put everything together in model builder, but ...
3
votes
1answer
65 views

How to give elevation information to a polygon feature class using existing TIN file ? (geological mapping)

I'm an ArcGIS 10.1 user. My issue: I have a printed form of a map which depicts geological bodies being surface rock occurence. Additionaly, there are elevation contour lines. I digitized the map by ...
0
votes
1answer
47 views

DEM difference looks like a hillshade

I wanted to find the elevation difference between 2 DEMs. When I got the data, I had to georef one image and had to aggregated it too because their cell values do not match. I also tried to resample ...
4
votes
2answers
414 views

how do you identify ridges on an elevation raster?

I was wondering whether anyone might be able to tell me in layman's terms how to extract or differentiate between ridges and hilltops from 10m elevation data using ArcGIS 10.1? Any advice would be ...
8
votes
2answers
349 views

DEM Elevation Units

I'm fairly new to the GIS world, and have a quick question. I'm currently using 10.1. I do not know much about rasters, so does transforming a DEM from one projection to another automatically convert ...
1
vote
1answer
468 views

How to Create Cost Surface Raster for Least Cost Path Analysis?

I have a DEM raster and would like to carry out a cost path analysis. Among other factors such as slope, proximity rivers etc. I would also like to take elevation into consideration. According to ...
1
vote
1answer
397 views

What is the highest obtainable resolution of FREE elevation data in the UK?

I am seeking closure with this question guys. I am aware of various sources of free elevation data ~30+ m, and I have been searching for higher resolution FREE data for a while now. This already ...
4
votes
2answers
375 views

Focal statistics to calculate saddle points from DEM

I have a conundrum with Focal Statistics and kernel files. I am been trying to identify saddle points in DEMs. I am attempting to rewrite this (thanks whuber) in a python script for 10.1. I have ...
0
votes
1answer
63 views

How do I determine the subsidence of land in Manila, Jakarta and Bangkok?

Can I set how these cities have lost elevation using digital elevation models? Is there a digital elevation model which data are updated? Or are there other methods? Thanks.
5
votes
1answer
834 views

Labeling contour lines in ArcMap [duplicate]

Can anybody give me advice on how to label contours as shown in Figure 2 below? I would like to be able to put the label "on" the line, which is easy enough. But I'd also like for the contour line to ...
0
votes
2answers
598 views

How to extract elevation data from binary .ADF elevation format at given coordinates?

I have a high resolution digital elevation model available. The ground resolution is 1 meter and the file format is adf which is some binary ESRI grid raster format. I have a script the outputs x/y- ...
1
vote
2answers
179 views

How to intersect shape files with elevation models?

I have a high resolution digital elevation model (DEM) and a line shape file displaying a bycicle track. The DEM has 1 meter resolution. The line shape is something like 25 km long. What I need is a ...
0
votes
1answer
105 views

How to select a subset of a DEM in ArcScene?

I'm using ArcGIS 10.0 and trying to open a digital elevation model in ArcScene. I'm working on a project and got the DEM data from official sources which is quite huge. The resolution of the DEM is 1 ...
3
votes
3answers
1k views

Obtain all elevations points from a raster DEM

I need to obtain all elevation grid points from a raster DEM. I see the steps required as: Read in raster DEM (Arc Info Binary Grid format). Create subset area using Points2One (see triangle area ...
5
votes
1answer
1k views

Python Script for getting elevation difference between two points

I have several stream segments 1000 Km long. I need to find the elevation difference between two consecutive points of distance 1 Km starting from the upstream to downstream. How can I get the ...
5
votes
3answers
1k views

How to transform GPX-tracks into elevation-tracks with any GIS?

I have a GPS track in GPX format available from a recent bike tour and I need and want to do some analysis on the tracks. I'm wondering whether there is any way to transform the GPX data into an ...
1
vote
1answer
173 views

How to apply DEM elevation adjustment parameters?

I have a nice DEM, created from UAV data, which I want to process further in QGIS, my platform of first choice. In order to represent the evelation of each pixel correctly, I have to adjust the ...
0
votes
0answers
33 views

How to extract elevation data from DEM along a polyline [duplicate]

I've been trying to use qGIS to extract and save as an attribute the data elevation along a line, knowing that something similar is available in ArcGIS using the Spatial Analysis tool. So far, ...
3
votes
1answer
78 views

What function should I use to assess the degree of elevational change (rocky cliffs etc.) of a DEM?

I have a DEM of my research area and I want to assess how the topography/elevation changes. I am specifically looking to see what areas may be good suitable bat-roosting habitat so I am trying to ...
2
votes
1answer
131 views

filter / generalize elevation points on the basis of some conditions

I wanted to generalize many elevation points in a rectangular area (about 700 square km). I need to take about 3 points for square km. These points must satisfy some conditions: One of these ...
0
votes
1answer
2k views

Calculate maximum and minimum elevation for a polygon layer from a DEM [duplicate]

I have a polygon layer and would like to know the min and max elevation within each polygon. My elevation layer is a digital elevation model. I'm not quite sure how to extract that information. I am ...
4
votes
1answer
319 views

Raster DEM generation

I have two shape files containing height information of a certain area and I need to create a raster DEM with GRASS using them. file 1 consists of height information in contours (isolines) file 2 ...
2
votes
1answer
363 views

Orthogonal Height Profile along line (sextante -> v.segment, r.profile?)

While trying to find a way to find "valleys/ridges" within a DEM, I'd like to know if there are tools, plugins or "methods" known or available to automatically generate height profiles along a given ...
5
votes
2answers
1k views

Exporting DEM-derived rasters to CSV from QGIS?

I have been able to import into QGIS a set of raster topographic maps and the associated DEM raster maps. It registered the two for me. From there I have calculated the associated slope raster map. ...
2
votes
1answer
380 views

Programmatically download (seamless) NED tiles?

I used to download 1/3 arcsecond elevation geotiffs from extract.cr.usgs.gov using web services. But a few days ago, that stopped working, probably because USGS reorganized their site. I tried ...
1
vote
1answer
362 views

How to calculate an hypsographic curve of a raster trhough a DEM

I am using Arcgis 10.1. I have a MODIS raster from the NSIDC website with a pixel resolution of 500 m and an attribute table with the fields 'VALUE' (as the code of snow, clouds, etc.) and 'COUNT' (as ...
4
votes
5answers
779 views

Elevation correction ASTER GDEM2 (+10m)

My ASTER GDEM2 has a average elevation error of -10m for my area. (I testet it using 90 defferential GPS reference points and compared it with old Topo25, SRTM, and GoogleMaps). I would like to ...
5
votes
1answer
10k views

How to calculate an elevation profile for a polyline in arcgis 10 with spatial analyst/3D analyst?

My elevation data is a floating point tif. I have a road for which I need to calculate the elevation profile, but I can´t see the tools to do this. Can I do this with ArcGIS? yours, Rob
16
votes
4answers
6k views

What is the best colour-ramp to use for elevation?

This is maybe rather subjective as it concerns style, but I would like to have a few decent colour ramps for my DEM when it is layed over my hill-shading. I have created the Swiss hillshade model as ...
1
vote
1answer
744 views

Why does QGIS Profile from Line tool give me the same value for every point?

I'm trying to make an elevation profile with QGIS's Profile from Line plugin. But when I do, the resulting points all have the same value: -32,767. I'd like to know what I'm doing wrong. My elevation ...
3
votes
1answer
157 views

Change ellipsoid reference for altitude in a DEM

I have DEM data stored as RGF93 (Lambert-93) for lat/lon and NGF-IGN69 for altitude. I'm trying to change the reference ellipsoid for the elevation data (ultimately to NTF, but WGS84 would be fine to ...
1
vote
1answer
419 views

How to create a profile with profile points at discrete altitude intervalls, e.g. each 10 m

In both SAGA and QGIS theres a profile-from-line-function that does a nice job of creating profiles. But there's no way to control the altitude spacing. Any ideas for workflows that would allow me ...
1
vote
2answers
841 views

How to get the altitude of the vector shapes from DTM raster layer?

I have a vector layer containing thousands of vector shapes/polygons and a raster layer with DTM. Every shape has its own OBJECTID in attribute table. I would like to get the altitude of every shape, ...
1
vote
1answer
595 views

Help with technique to create contours from ASTER DEM in Phnom Penh, Cambodia

I have the ASTER version 2 DEM of Cambodia. I want to use it to create 1m contours of Phnom Penh, Cambodia. If anyone has this already please let me know. Now, onto the problems: I am using ArcGIS ...
2
votes
1answer
541 views

Read .DEM (USGS) FIles with C#

I have a huge number of .DEMs and have been investigating how to process them into something useful. Does anyone know how, or even if it is possible to read coordinates and elevation data from ...
8
votes
2answers
594 views

Elevation profile sample point algorithm

In generating an elevation profile, samples from the underlying raster must be taken. If the objective is to create a profile of maximum quality, how should the locations of sample points be ...
6
votes
5answers
1k views

Is there an online tile-based elevation service?

I am working on an application that requires the elevation at a given lat/long coordinate for lots of closely spaced coordinates along any given irregular path. (The path is a trace of a ...
0
votes
0answers
572 views

buildings shadow areas calculation

is it possible to calculate shadow areas of buildings or simulate shadows of buildings in a city using e-cognition software, with the DSM of the buildings and the sun angle and azimuth known?....if ...
7
votes
2answers
782 views

What is the smallest contour interval possible when derived from a DTM?

I am converting a 2m DTM to contours, and would like to have the smallest interval possible. Is there a theoretical limit, or even a rule of thumb for defining contour intervals based on the ...
3
votes
6answers
2k views

shadow simulation from buildings

is it possible to use hillshade function in ArcMap to calculate shadow areas of buildings or simulate shadows of buildings, using DSM of the buildings and the sun angle and azimuth?
9
votes
4answers
2k views

Code to calculate elevation profile along line from a DEM

Given a DEM (Digital Elevation Model) say in and a line (x1,y1) --> (x2,y2) (paired coordinates (x,y)), how can one calculate the elevation profile or cross-section projected on that line ? I am ...
1
vote
3answers
2k views

Where can I download 1 arc-second elevation data for Canada other than Geobase?

Can someone suggest a source for Canadian elevation data better or equivalent to 1 arc-second? I have a good data source for Ontario but for other provinces folks often recommend Geobase which claims ...