2
votes
1answer
29 views

Algorithm behind custom tool of ArcGIS for Desktop called xyz2grid21?

I am a researcher from Romania and I have used xyz2grid21 ArcGIS tool (by Min-Lang Huang) in order to convert xyz files (LIDAR data) to ASCII and ESRI grid in order to obtain a DTM. I need to know ...
2
votes
2answers
69 views

How to manipulate lidar map using sun azimuth

Hi I am VERY new to QGIS and am struggling. I have a Lidar map and want to change the view so that the ground shadow is manipulated (looking for archaeological anomalies). I think it is the sun angle ...
2
votes
2answers
98 views

Filtering out canopies and buildings from DEM to have a bare earth elevation

Can anyone suggest methods in filtering out trees and buildings from a DEM so as to come up with a reliable DTM? What I have is a grid from a LIDAR data. I was going to clean out the unnecessary ...
2
votes
0answers
28 views

Has anyone used ArcGIS for 'automatically' detecting lineaments from a high-resolution (1m) DEM?

I have a set of DEM's produced from LIDAR data. I am wondering if anyone is familiar with or knew of any published research papers which looked at (semi-)automatically detecting lineaments /or ...
3
votes
3answers
200 views

Las to bare-earth DEM: average points spacing and cell size

I am using ArcGIS 10.1 to generate a DEM (bare earth) from LAS dataset. To accomplish this, I use 'Las Dataset to Raster' tool as described in Esri website. I have read here and there in the web that ...
1
vote
2answers
89 views

How to determine bare earth from unclassified LAS file

I have data in LAS format with RGB values created from Aerial photogrammetry using a UAV. I am trying to find a solution to extract the bare earth to create my DTM from the DSM. I have tried SAGA, ...
1
vote
2answers
95 views

Contours from DEM with human features

I am rather new at GIS and I would like to have some guidance on what follows. I have some DEMs derived from LiDAR data. These DEMs contain building and other human features (e.g., roads). I was ...
1
vote
1answer
44 views

Make a Ground Mask raster with the Greater Than tool (DEMs are generated from LiDAR)

I'm trying to see if I can replicate the Esri solar suitability site example from this article. I fail on the creation of the binary ground raster. I have made a Bare Earth raster from LiDAR ground ...
0
votes
1answer
80 views

How to remove pixel values below 0 in Digital Elevation Model in ArcGIS?

I made a DEM layer from LAS file (LiDAR).Now for showing a map I have a map like the image below! I wonder how can I remove black area? They have the value -2 to 16! How is possible to set the value ...
10
votes
2answers
170 views

Account for bridge overpasses in a ground DEM to allow for water flow under the overpass

I have a bare earth DEM made from lidar data (A). It works well and has passed all accuracy tests. It is used in storm surge models. The problem we are having is on underpasses. I need to allow water ...
2
votes
1answer
81 views

Elevation maps from point clouds: TPS vs. what other methods

In the reply to another question, @thehealingprocess refers to "...a comparison of interpolation methods for interpolating elevation maps from LiDAR clouds, and in almost all scenarios thin ...
3
votes
2answers
347 views

Creating DSM and DTM from a LAS using a freeware solution

Is it possible to export a surface and terrain model files from an aerial, LiDAR point cloud (LAS) set? I am using SAGA GIS for very basic operations, but I couldn't find this option (and I have a ...
0
votes
1answer
102 views

Where to obtain LiDAR Data for Romania?

I need LIDAR Data for realizing a urban hydrology study (Romania areas), whence I can get this data? There is a chance to obtain data for this area (Cluj-Napoca city)? I'm PhD student are chances to ...
3
votes
1answer
321 views

How to create contours from smoothed DEM instead of using Terrain to Raster?

I'm fairly new to working with lidar and have been assigned the task of creating 2ft contours for the entire county using USGS-provided lidar tiles. Is there a significant difference in the accuracy ...
4
votes
2answers
238 views

How to de-noise a DSM

I have created a DEM, DSM, and nDSM from a LiDAR Point Cloud using SAGA-GIS. I extracted the appropriate returns from the point cloud, then converted to grid, and then closed gaps to fill in any ...
1
vote
1answer
127 views

How to compare accuracy of two DEM using GRASS

How do I compare accuracy of two DEM data (lidar and srtm) (possibly through rmse) using GRASS GIS? thanks
1
vote
1answer
70 views

rooftop modeling

I´m trying to model building rooftops based on a LiDAR dataset. I've already interpolated using Delaunay's triangulation a DEM with 1m resolution. Due to LiDAR data is not accurate in building edges, ...
1
vote
1answer
121 views

Input data format and read multiple files into Grass 6.4.1

I am trying to read in multiple (hundreds, thousand) LiDAR ascii files into Grass. They contain elevation data. I think I have managed one, and I can make a map of elevations, using File, Import ...
4
votes
2answers
458 views

Retrieving average building height in urban areas?

I am looking for a way to collect data on the height profile of some cities over time. I don't need to produce a detailed 3D reconstruction of cities, nor do I need to detect and measure individual ...
12
votes
2answers
523 views

PostGIS interpolation / triangulation options

I'm looking for an open source workflow to automate DEM construction. We have a series of sites that fall within a LIDAR dataset. We want to create site specific DEM's for each site, and we're ...
9
votes
3answers
3k views

Best method to aggregate 1m DEM mosaic to 10m DEM

I have a mosaic of a 1m LiDar derived DEM. I need to output a subset of the data as a 10m DEM. I am currently using the aggregate tool in ARCGIS 10 to produce a mean value for each new 10m pixel. ...
11
votes
4answers
563 views

Dikes extraction from DEM

I do have DEM of 1x1 meter and original LiDAR point cloud in .las, that DEM is made of. I need to extract river dikes (highest points of the dikes) to vector feature (point, polyline). Any idea for ...
5
votes
2answers
360 views

Seeking commercial web service for LIDAR/DSM data in USA

I apologize for not knowing all the proper terminology to ask this question. I am seeking a commercial service for providing pay-per-use high resolution elevation data in North America. It must come ...
2
votes
2answers
5k views

Viewing .las format LIDAR data in QGIS?

Is there an easy path to visualizing this LIDAR data? I have QGIS, and some USGS LIDAR data in (.las) format downloaded from http://lidar.cr.usgs.gov/ . This means I have both the (.las) and ...
8
votes
2answers
2k views

Workflow for determining stream gradient?

As far as data goes, I'm working with NHD .shp files, 10m DEMs, and some LIDAR data. My goal is to determine gradient for 100m segments of a network of streams. I'm already able to do this, but I ...
4
votes
2answers
615 views

comparing two TINs

i have the following two files: 1) LiDAR las file1 2) Let's give it a name LiDAR las file2, contains the same file1 data, where number of points randomly removed. So if file1 contains X number of ...
11
votes
4answers
2k views

Comparing two Digital Elevation Models (DEMs) from LAS files?

I have two Lidar las files, one is original let's say with X points. And the other is copy of the first las file but with Y points, where Y is less than X. Now, I want to compare how the Digital ...
15
votes
11answers
23k views

How to a convert LiDAR XYZ files to DEM / DSM?

Normally consultants (LiDAR survey) provide me with data to my specifications; already in ESRI GRID or ASCII GRID format. This way LiDAR data can be easily used with ArcGIS. This time I only have xyz ...