1
vote
1answer
40 views

QGIS DEM (Terrain models) Mode Slope creates wrong data [duplicate]

I have a DEM raster file downloaded from the USGS site. The file can be downloaded here. I am trying to create a slope raster in percent with the DEM tool in QGIS. The GDAL command is the following: ...
1
vote
1answer
45 views

Fill sinks error in arcHydro

I am working on a project that is modeling runoff at a county level. The DEM used is lidar derived and has a 5 ft resolution. The general workflow I am flowing is Sink evaluation Sink Selection (to ...
2
votes
0answers
30 views

Define uphill side of roads and buildings

I have a big raster of a mountain region and I need to extract the uphill side of roads and buildings, from these elements to the pick of mountains. For a road I know the uphill side changes in ...
1
vote
1answer
227 views

How to Create Cost Surface Raster for Least Cost Path Analysis?

I have a DEM raster and would like to carry out a cost path analysis. Among other factors such as slope, proximity rivers etc. I would also like to take elevation into consideration. According to ...
1
vote
1answer
159 views

Creating Random Points in ArcGIS 10.1

I would like to create random points across my study area (which is a DEM raster) using the Feature Class> Create Random Points. However, I need to select/copy/move/delete these points and re-arrange ...
0
votes
2answers
52 views

Two r.mapcalc calculations return a much bigger raster cell size than the input raster

I tried the following calculations with a GeoTiff sample, having a cell size of 25m: Calculating the togographic exposure (TOPEX) and estimating the mean topographic curvature Both, the resulting ...
1
vote
0answers
49 views

Whats the best way to create bathymetric contour lines?

I have a raster dataset with both Topographic and Bathymetric stored in it. What is the best way to create exact contours of the lake-bed? This becomes tricky when I want to make the contour for depth ...
0
votes
2answers
84 views

How to identify valleys on DEM in ArcGIS 10.1 [closed]

First, What is the best and easiest way to identify valleys in a DEM raster? Second, how do you create a least-cost pathway for each valley in a region based on low angle slope and proximity to ...
5
votes
2answers
55 views

How to automate creation of toe of slope from DEM?

I was looking for an automated process to "identify" the toe of a slope from a DEM and ran across this ESRI thread and technique: I am at Step 7 but have no idea how this is accomplished. I get it is ...
0
votes
0answers
81 views

converting vectors to raster (burning streams)

I converted my stream vector to a raster file (using polyline to raster conversion tool). I anticipated that I would get a No Data row in the raster file attribute table, so that I could use a ...
2
votes
1answer
260 views

How to perform a Cost Path analysis in ArcGIS 10.1?

Is it possible to model the easiest pathway through a landscape between many points (rather than just two)? I want to carry out a cost-path analysis, I would like to display the easiest pathways ...
0
votes
0answers
14 views

Abnormal DEM values after fill operation

With arcmap 10.1. after filling the DEM the value range is -70 to 1078, but it should be between 225 to 1200. Can anyone suggest me a methodology or the necessary steps in arcgis 10.1 to mend my ...
4
votes
2answers
152 views

How to de-noise a DSM

I have created a DEM, DSM, and nDSM from a LiDAR Point Cloud using SAGA-GIS. I extracted the appropriate returns from the point cloud, then converted to grid, and then closed gaps to fill in any ...
3
votes
0answers
50 views

Calculate surface elevation from DEM of pit and known volume with which it is being filled

I am using ArcGIS 10.1. I have a DEM of a pit. I have a known volume of material that I want to put in the pit. I want to know what the elevation of the flat surface of this material will be ...
2
votes
1answer
165 views

Spatial Analysis - Calculate a cells elevation (height) above the nearest stream cell

I have searched for some ideas on how to formulate this analysis, but have come up short. I imagine there is a pretty straight forward answer; any help would be greatly appreciates. Data: DEM, ...
0
votes
1answer
72 views

Viewshed calculation using SQL

Can i calculate viewshed in MS-SQL server? Viewshed analysis is Raster operation. I have elevation value vector observation as point vectors. Are there any methods to calculate Viewshed (using ...
2
votes
1answer
104 views

How to multiply raster DEM with a linear graph value

I would like to multiply my Raster DEM with a linear graph value y = mx + C. The graph values look as follows: I want to make a new raster where each cell will represent a damage factor from ...
0
votes
0answers
84 views

Problem with merging 15 DEM files in ArcGIS

I have 15 DEM files downloaded from USGS website. The pixel depth of each file is 32 bit floating, generic with format FLT. I'm then using data Management Tools > Raster dataset > Mosaics to new ...
1
vote
1answer
75 views

Raster Smoothing python [duplicate]

I want to perform raster smoothing on a DEM file. I want to to assign the elevation of each pixel using the average elevations of its 8 neighbors. The ESRI's "Python scripting for ArcGIS" has a ...
3
votes
1answer
205 views

How to join 2D polylines and DEM into 3D polylines?

I got a simple question but could not find a satisfactory answer yet: I have a road network in 2D/PostGIS and a DEM. I want to turn the road network into 3D by retrieving the Z-value from the DEM. ...
0
votes
1answer
71 views

create POV-Ray image from DEM-file in grass

I am working on r.out.pov Tool of grass 6.4 creating a POV-ray(beautiful 3D) image from an elevation raster. You can see this link for more information about 3D analysis of GRASS. r.out.pov manual ...
1
vote
1answer
433 views

Spatially join large raster to polygon shapefile

I have a large raster file with elevation data. From this raster, I would like to infer the average ruggedness for different geographic zones (like countries). I have the "countries shapefile" as a ...
3
votes
3answers
188 views

What DEMs does QGIS support? + DEM data sample

I am working on QGIS rasters. I want to know about DEM file formats supported by QGIS. I know that QGIS can read the GDAL supported formats. but what is GDAL supported format ? Does QGIS support the ...
1
vote
1answer
36 views

How to export Std Dev from Raster Dataset of DEM to classify current extent and execute Contour Tool with Python?

I want to create Countour Lines for a DEM which are based on a "STD dev" classificaion. My problem is that the "Std dev" is exported in an unknown type instead of a String. So the classifacation for ...
1
vote
1answer
140 views

Can I prevent QGIS raster clipper from changing output cell/pixel size?

I have performed a DEM extraction using the clipper tool in QGIS 1.9.0 Master, using a mask layer, the original resolution of the DEM is 20x20 but in the resultant DEM the new resolution is ...
0
votes
0answers
52 views

Adding elevation property to raster cells

I am trying to add elevation to raster cells. I have a land use raster map, and a DEM. And I'm at a loss to figure out how to combine them. Is it even possible to add "attribute" data like this to ...
4
votes
2answers
97 views

How to create a single contour defining the boundary between sea and land

Hello! I am still learning so forgive me if my question is very simple... I am trying to create a map with ArcGIS. The area I am working on is a seasite and I found that in some parts the cells appear ...
4
votes
2answers
120 views

How to (vertically) register a DEM to GPS readings?

I don't know if what I ask is possible or not but let's try... I have two datasets: a DEM as a point cloud in a relative coordinate system, constructed with 3D algorithm structure-from-motion. 20 ...
0
votes
0answers
95 views

Manually edit cell value in DEM in Arcmap10?

Is there any chance that I could manually pick a group of cell in DEM, then edit the value of them in Arcmap 10? I know about the Aris Grid Editor for Arcmap but it requires licence and it's too ...
1
vote
1answer
1k views

No. of Bands in the input Raster

I have downloaded a 7.5 min DEM . Now while I am trying to mosaic them it gives me an error saying "Input and target dataset should have the same number of bands" . How can I figure out the number of ...
0
votes
1answer
127 views

How to find locations for hydro power using raster analysis?

I have a stream network and DEM file both in raster format. I need to extract values from DEM to stream network. For the analysis in stream network after that, I need to find out the places for hydro ...
6
votes
4answers
343 views

How to extract breaklines from a given DEM?

Breaklines are very useful for describing a terrain - for example to build an exact TIN. My question is, how to extract these breaklines from a given DEM? I calculated the curvature (vertical) - ...
2
votes
1answer
125 views

filter / generalize elevation points on the basis of some conditions

I wanted to generalize many elevation points in a rectangular area (about 700 square km). I need to take about 3 points for square km. These points must satisfy some conditions: One of these ...
3
votes
1answer
132 views

ArcGIS Raster Symbology - Break contour at 0

In ArcGIS 10, how can I break raster symbology (stretched) at a particular value (i.e. 0). For example, I have a DEM representing both topography and bathymetry and I want a break at the 0 m contour ...
1
vote
2answers
129 views

Put color for raster data(aspect.tif) on QGIS1.8.0

I create aspect.tif from DEM file. I could put the values(0 to 360)from contrast enhancement. I could set color from color map(freakout or Pseudocolor). In here, the data is shown by only 4 colors. I ...
5
votes
1answer
146 views

Calc bottomline of valleys

Which way do I calculate bottomlines of valleys or even more preceise: which way do I "find" valleys (for example suggested tectonic faults). Sample below shows a height profile (profile from line) ...
5
votes
2answers
1k views

Exporting DEM-derived rasters to CSV from QGIS?

I have been able to import into QGIS a set of raster topographic maps and the associated DEM raster maps. It registered the two for me. From there I have calculated the associated slope raster map. ...
8
votes
5answers
280 views

How to ensure uniform colour for DEMs?

This is a silly question, but one I've been trying to figure out for a while. I have two Aster DEM tiles, one next to the other. How do I ensure uniform colour for both?
1
vote
1answer
449 views

Problem merging two rasters in Qgis

I have two rasters in Geotiff, same CRS. I tried to merge them and I have this error code ERROR 4: `C:/Anita_Tepoztln/Rasters/e142.tif' does not exist in the file system, and is not recognised as a ...
2
votes
1answer
408 views

Creating a constant elevation raster with multiple attributes

Is it possible to create a raster with a constant value with multiple attributes? Such as: rowid value count Name 1 630 36000 Forest 2 630 75000 Anthro 3 630 2600 ...
9
votes
3answers
2k views

Best method to aggregate 1m DEM mosaic to 10m DEM

I have a mosaic of a 1m LiDar derived DEM. I need to output a subset of the data as a 10m DEM. I am currently using the aggregate tool in ARCGIS 10 to produce a mean value for each new 10m pixel. ...
7
votes
3answers
611 views

Creating raster or vector raster from DEM point file?

i have a point shape of 75.000 elevation points in a regular 5 m grid. We now want to create a polygon grid with the elevation points as "centroids". Unfortunately, all attempts to do so fail: I ...
11
votes
4answers
513 views

Dikes extraction from DEM

I do have DEM of 1x1 meter and original LiDAR point cloud in .las, that DEM is made of. I need to extract river dikes (highest points of the dikes) to vector feature (point, polyline). Any idea for ...
11
votes
1answer
448 views

QGis raster terrain analysis - The curvature filter puzzles me

I am a french Master student at university Grenoble INP, and during my master project I have worked on DEM (raster) terrain analysis. Thus, I have read the source code of several QGis-1.7.4 raster ...
3
votes
1answer
155 views

Change ellipsoid reference for altitude in a DEM

I have DEM data stored as RGF93 (Lambert-93) for lat/lon and NGF-IGN69 for altitude. I'm trying to change the reference ellipsoid for the elevation data (ultimately to NTF, but WGS84 would be fine to ...
1
vote
1answer
557 views

Help with technique to create contours from ASTER DEM in Phnom Penh, Cambodia

I have the ASTER version 2 DEM of Cambodia. I want to use it to create 1m contours of Phnom Penh, Cambodia. If anyone has this already please let me know. Now, onto the problems: I am using ArcGIS ...
2
votes
3answers
2k views

How to convert raster data into regularly sampled points?

I am wondering if there's another way to convert raster data (ex: DEM) into regularly sampled points. I've used Raster to Point under ArcToolbox previously, but if the raster data is huge, that's a ...
5
votes
2answers
1k views

How to build an artificial 'dam' across a river?

I have a DEM. Created all files related to watershed including accumulation, direction, streams etc... I'm stuck creating a dam. I request you to please let me know how to build an artificial 'dam' ...
8
votes
2answers
776 views

Extract the area of a DEM above where 60% of the region lies?

I have a DEM of a mountainous region. I'd like to extract the areas of the DEM above which 60% of the total DEM area lies. So, essentially I'd like to extract the areas representing upper portions of ...
2
votes
2answers
1k views

Converting ASCII grid/NTF to SRTM/DEM

I want to use the Ordnance Survey Land-Form Panorama product in some software called Maperitive, which can read custom SRTM DEM files. The data is provided in the following formats: DXF [Contours] ...