A remote sensing and image analysis software package produced by Exelis Visual Information Solutions (Exelis VIS).

learn more… | top users | synonyms

1
vote
1answer
499 views

Raster vs. Raster Scatter Plot in ArcGIS

I created two raster datasets from the same world view 2 image. One dataset is NDVI, the other is a normalized surface water index (NDSWI). I would like to create a scatter plot for a pixel by pixel ...
0
votes
0answers
12 views

Maximum Likelihood Classification in ENVI

can anyone help me? I am a new ENVI user and I am trying to perform a supervised classification of a Landsat 8 image with the maximum likelihood algorithm. In order to run the classification, I have ...
0
votes
0answers
8 views

How to sync ENVI image window with Google Earth Pro?

I am unable to find documentation explaining how to sync an view in ENVI with Google Earth. I am zooming in and out of a RapidEye image in ENVI for an object-oriented classification and it would be ...
1
vote
0answers
95 views

ENVI: Postclassification, remove pixels of certain size

I did a classification over multiple Landsat imagery in ENVI 5.1, which turned out not too bad (ice and snow in Cyan in the picture below). Now I am about to do a postclassification to filter out ...
0
votes
1answer
20 views

Estimation of Land Surface Temperature using ENVI 5.2

I am doing research about land surface temperature using Landsat 8 image. However, I have a problem with them. I have read literature but i can not do it in ENVI 5.2. Could you help me ...
3
votes
1answer
373 views

Applying pixel reliability mask to time series MOD13Q1

I am working with a 23-band GEOTiff in which each band is a 16-day MVC MODIS NDVI image. The MODIS .hdfs include a "pixel reliability" image with the following values: [-1]: Fill/No Data-Not ...
2
votes
1answer
594 views

Enhanced vegetation index using ENVI 4.7 bandmath

I computed Enhanced Vegetation Index using band math in ENVI 4.7 software. The expression used was: 2.5*((float(b1)- float(b2))/(float(b1)+ (6*float(b2)) +(7.5* float(b3)))) BYTSCL(float(b1), min = ...
0
votes
1answer
1k views

EVI and SAVI indices for Landsat 7 and Landsat 8

I'm trying to run the indices Savi and EVI at landsat 7 & 8. About SAVI I read this from ESRI and explains very good this index. About SAVI I have a question, I will choose buy my self the L ...
2
votes
1answer
57 views

NDVI in ENVI: Output format issue

I am working on NDVI in ENVI... the output file is in Envi Standard format... I required it in Envi Classification format, which can be done through Envi Edit Header tool... This requirement is for ...
0
votes
1answer
369 views

ENVI 5.2.1 How to do an Accuracy Assessment using test data from a shapefile

ENVI 5.2.1. From a .tiff image (4 bands) I created a Supervised Classification Maximum Likelihood .dat file. Now I want to perform an Accuracy Assessment using test data from a shapefile. I've tried ...
4
votes
3answers
58 views

Merging georeferenced images that have overlapping information?

Having trouble to mosaic two overlapping .tif files. I need to merge these two images together into one resampled raster image. Unfortunately I cannot do this with my ability and resource available to ...
0
votes
1answer
185 views

mosaicking and projecting modis land cover data MCD12Q1

I have modis land cover MCD12Q1 data .Its in the sinusoidal projection (.hdf native format ). I have to study the land cover characters from the data for which i have to convert them into .tif format ...
1
vote
0answers
15 views

Difference between radiometric correction at surface and at sensor in ENVI

I want to ask you about the difference between the radiometric correction at surface and at sensor in ENVI software, I do the two in flash and radiometric correction and the results was same image. ...
4
votes
2answers
193 views

ENVI to map composition

I'd like to print out 6 images in a single page. How can I do this using map composition tools in ENVI (6 images are year-to-year dynamic images with the same size and the same geo-referencing)? ...
2
votes
1answer
175 views

Landsat 8 dataset processing in batch?

I´m trying to open Landsat images at Geotiff with metadata in ENVI. I have a dataset of 101 Landsat 8 images and I want to open all the images and then save them to do some band math either on ...
0
votes
1answer
19 views

Call Toolbox operators of ENVI from IDL code

Is it possible to call the clustering/classification algorithms included in the toolbox of ENVI (gui) from IDL (source code) and how?
10
votes
3answers
9k views

Manually edit a raster to improve a classification?

I have a land cover classification derived from Landsat TM imagery - I created this classification using ENVI. I would like to edit individual and groups of cells in some areas of the classification ...
0
votes
0answers
16 views

Loading a lot of raster into ENVI

I have a lot of raster in different folder and subfolder. I need to load them, because I would like to do seamless mosaic. I know the patch of each file but I don't know how to do a kind of loop that ...
0
votes
2answers
34 views

Which one is best for atmospheric correction?

My aim is to determine surface temperature extraction by computing NDVI from Landsat 7 and Landsat 8. suggest me which method DOS (dark object subtraction) or FLAASH atmospheric correction in ENVI ...
0
votes
1answer
185 views

Open Sentinel-1 products using ENVI 5.3

Is it possible to open Sentinel-1 products using ENVI 5.3? GeoTiff Sentinel-1 images can be opened independently but I can't open the product (from its xml file) using ENVI. I mean, is SARscape ...
5
votes
4answers
101 views

Transform raster donuts to circles

Let's assume I have a raster image consisting of 0's and several donut-shaped rings of 1's. This raster could for example be the result of classifying a satellite image with ponds and lakes in it into ...
1
vote
1answer
43 views

How to create a map from separate ascii files without merging them?

I have three ascii files including longitudes, latitudes and pixel values. I just wonder whether there is anyway to display a map from the three files and save it in geotiff without merging them into ...
3
votes
0answers
147 views

Import GPS SINEX (for velocity analysis) into Sarscape or processing with others software

I try to import GPS snx. into Sarscape 5.2 (use GPS Import tool) and getting error 115) ) gps_type : [sinex] 116) ) generate_kml : [OK] 117) ) generate_shape : [OK] 118) ) ...
0
votes
1answer
89 views

How to remove shadows from high resolution imagery (IKONOS 1M)

I have dataset imagery comes from IKONOS satellite, the dataset contains "imagery with 1m resolution - metadata - rpc file", the metadata file contains the information about "Sun Angle Azimuth - Sun ...
3
votes
4answers
781 views

Some remote sensing tutorials [closed]

I could use some tutorials on remote sensing, but some books provided they are free, would be useful. To be specific, tutorials on ERDAS Imagine, ENVI and other remote sensing software, general ...
1
vote
3answers
183 views

Open LiDAR DEM of the UK with *.asc extension

I've downloaded a tile of a freely accessible LiDAR DEM of the UK from http://environment.data.gov.uk/ds/survey#/download. But I don't know how to open it. The files inside have the *.asc extension. ...
0
votes
0answers
50 views

Reprojecting MODIS NDVI and reading the hdf output file in ENVI

I'm working with ENVI5.3 and want to open a MODIS NDVI (MOD13Q1) in hdf format. Firstly, I used the Modis Reprojeciton Tool to reproject the modis tile. And I opened the reprojected file in hdf format ...
0
votes
2answers
2k views

how i calculate land surface temperature using landsat 8 in Envi 5.1

I am doing research about land surface temperature using Landsat 8 image. However, I have a problem with them. I have read document from Landsat.org, but i can not do it in Envi. Could you help me ...
2
votes
0answers
39 views

How to interpolate values for NaN pixels using ENVI?

I'm currently using MODIS data and am running into problems with NaN values in the final product caused by clouds. I'm interesting in a simple way to spatially interpolate (fill in) these NaN values. ...
4
votes
1answer
65 views

Where are the “band names” of an ENVI file once it is imported in R?

I have a .dat file (ENVI format) with specific band names, as you can see in the snapshot. I've imported this file in R, but I cannot find the band names in the R object. The command ...
3
votes
2answers
307 views

ENVI raster file with nodata change to 0

I have a geotiff that I converted to a ENVI raster file with the following command: gdal_translate -of ENVI srtm_05_08.tif data.bil The geotiff has water values supposedly set to nodata. I am ...
1
vote
1answer
34 views

MOD13Q1 data (2008-2012)

i ordered MOD13Q1 images (2008 -2012) from NASA and there came in hdf format, now i want to extract only NDVI images but the hdf made up of all vegetation indices data.Please how can i solve this?
0
votes
1answer
333 views

Opening an modis hdf file in Envi and Calibration

I have downloaded an modis hdf file.it is l1 and its name is MOD021KM ..I want to convert it to radiance.so I performed this steps in envi Open>EOS>MODIS selected modis hdf file.then I tried to run ...
4
votes
0answers
31 views

What's the binary format of ENVI (Classic) ROIs?

I'm a (lonely) Pythonist in an office full of ENVI/IDL users. I've created some tools to help bridge the gap, but one big stumbling block is ENVI Classic .roi files, which my colleagues use a lot. I ...
2
votes
1answer
2k views

Reprojected MODIS NDVI has range from -32768 to 32767, expected -1 to 1

I'm new to StackExchange and to remote sensing. I am working with MOD13Q1 250m 16-day MVCs. My goal is to use NDVI time-series to classify cropping pattern and crop type, then link this data to ...
6
votes
2answers
210 views

Landsat8 DN to TOA Reflectance (minus values)

I'm learning how to perform atmospheric correction manually, hence not using the automated methods available in ENVI metadata (band 1) for my Landsat 8 scene is as follows; RADIANCE_MULT_BAND_1 = ...
2
votes
0answers
22 views

Tasseled Cap in ENVI

Im working on ENVI 5.2, with Tasseled cap (TCT). The resulted output from this process is in ENVI Standard format, which shows error when used as an input in Confusion Matrix... For this i want its ...
2
votes
1answer
120 views

Is possible to merge landsat 8 with High Resolution Satellite Imagery?

i have landsat8 and High Resolution Imagery (1m) in the same study area, is possible to merge them to get one imagery so that i can take advantage of the accuracy satellite imagery.
1
vote
5answers
2k views

Fix Landsat 7 SLC-off in ENVI?

I have a couple of Landsat 7 images and they all have striping as a result of the SLC failure. Does anyone have any suggestions as to how to destripe the image using ENVI? I plan to use these images ...
2
votes
1answer
72 views

How to add new feature class to already classified image

I have at hand this already classified image with 8 vegetation classes. Now I would want to change a part of existing vegetation class to a NEW vegetation class, making it 9 classes. I do not want ...
0
votes
1answer
236 views

Analyzing stacked time series NDVI images in ENVI

I just started playing around with stacking NDVI images from different years into one RGB value and am unsure how to read the photos or analyze them. The image on the left had R 2011 G 2011 and B ...
1
vote
1answer
85 views

Enhanced Vegetation Index Value

Can enhanced vegetation index have values greater than 1? I am using the ENVI software to calculate enhanced vegetation index (EVI) of a hyperspectral image and my EVI value range was from 0 to 1.9. ...
1
vote
1answer
52 views

Parameter names and meaning of their values in an ENVI header file

This is the header of an Envi file: ENVI description = { PolSARpro File Imported to ENVI} samples = 8407 lines = 5569 bands = 1 header offset = 0 file type = ENVI Standard data type = 4 ...
0
votes
0answers
34 views

why ENVI displays colormap classified image as a RGB image

I want to do accuracy assessment in ENVI. My ground through image has 19 classes (Unsigned 16bit) when I opened it ERDAS and ARCGIS. But when I opened it in ENVI, ENVI displays these image as a RGB ...
1
vote
1answer
359 views

ENVI5.0. Is it possible to use “Quickmap” option? How to create a simple map?

I used to work in ENVI 4.8, but now have to move on ENVI5.0 I found it was changed a lot comparably with the previous versions, obtained many good new options, but some old options, in ENVI4.8, are ...
0
votes
0answers
31 views

Derive individual land cover classes from .jpg map

I have a .jpg image which is land cover classification image with 9 classes. I want to extract raster image (.img file) which contains the same classes as .jpg image (9 classes too). Is there any tool ...
2
votes
2answers
1k views

Converting *.tif file into headerless (flat) binary file?

I am using NDVI files (value range -1 to +1) created from Landsat CDR images to produce a timeseries in TIMESAT software. My .tif file has following characteristics. File type TIFF,Data Type ...
0
votes
0answers
42 views

Reflectance calibration inLandsat 5 TM met vs Envi Landsat Calibration tool

I am having a problem calibrating a Landsat 5 TM image to reflection TOA. I am using Envi Classic to perform the calibration in the Landsat Calibration tool. Part of the problem is the .met file only ...
0
votes
0answers
25 views

Problem using ENVI/IDL ENVITask('BuildBandStack')

I am trying to stack 2 bands together from 2 different landsat images using ENVITask('BuildBandStack'). These are landsat images from two different years, and Band 1 in both years. When I run my code ...
0
votes
0answers
44 views

How to transform ENVI Hdr to PNG using GDAL?

I am trying to transform a ENVI Hdr image into a PNG (or other RGB image format) in order to visualize this image. I am selecting the three default bands (55, 41, and 12). I am using GDAL by using ...