A Geospatial Data Abstraction Library (GDAL) image mosaicing, reprojection, and warping utility

learn more… | top users | synonyms

0
votes
0answers
21 views

how to change whole raster folder?

I used to gdalwarp to reproject raster tiff file, but I did it one by one How can I manage to do all raster in my folder (about 70 file) ? Is it possible? I am using ubuntu-64bit
0
votes
0answers
72 views

How to transform any GTiff to Lambert Azimuthal Equal Area with GDAL?

I am trying to transform a GTiff EPSG:4326 +proj=longlat +datum=WGS84 +no_defs and a GTiff EPSG:31982 +proj=utm +zone=22 +south +ellps=GRS80 +towgs84=0,0,0,0,0,0,0 +units=m +no_defs both to EPSG:...
2
votes
2answers
142 views

projection conversion from local to UTM

I have some images at a local coordinate system with the following specifications: TIFF header file: -gdalinfo im.tif Driver: GTiff/GeoTIFF Coordinate System is: PROJCS["Eastern Ridge Project Grid ...
1
vote
1answer
36 views

resample etopo.grd with gdal_warp gives many null values

I'm having a problem with resampling ETOPO NetCDF GRD to a bigger pixelsize for using it with Generic Mapping Tools. I'm using gdal_warp for the resampling (just for testing with pixelsize of 1°): ...
3
votes
1answer
95 views

Mass reprojection of raster files in a loop [Linux]

I have a folder with numerous .asc raster files that each accompanied by a corresponding .prj file. The file basename is the same for both files. The projection however can vary between all of them (...
1
vote
0answers
84 views

GDAL - replacing rgb value (0,0,0) with (nodata,nodata,nodata)

I have a set of rasters in which I want to replace any rgb value of (0,0,0) with (nodata,nodata,nodata) I've tried using gdal_translate -a_nodata "0,0,0" in.tif out.tif But this seems to convert ...
1
vote
0answers
25 views

Transform stereographic projection using GDAL

How can I read/wrap a JPG image without any embedded projection/coordinate system to an autoreferenced GEOTIFF with Mercator or similar coordinate system using GDAL? The image is 500x500 px and I ...
1
vote
2answers
40 views

gdalwarp change spatial resolution

I just realized that I have Geo-TIFF's in the samme coordinatesystem but different resolution. DOP20 (20cm=1px) and DOP10 (10cm=1px) mix. Now wanted to use gdalwarp to transform the DOP20 TIFF into ...
2
votes
2answers
231 views

How to re-project a netcdf file?

I want to re-project and resample a netcf file but I am getting a usage problem: gdalwarp -t_srs EPSG:3410 -ts 1383 586 NETCFD:"C:\data\product.nc":gsfc output.tiff
1
vote
0answers
33 views

Changes in MOD09A1 quality mask as processed with GDAL

I'm analyzing MOD09A1 spectral data using GDAL/Python. The quality mask is a uint32 dataset and want to pull out the value of the first bit to mask the spectral data (1 == poor data; 0 == good data). ...
1
vote
1answer
58 views

gdal_warp some geotiffs change SRS

Hello I#m quite new to GDAL. I have some Geotiffs that I want reproject. I tried that with one file and it works great, but because the TIFF has to be slightly rotated for the conversion I have some ...
1
vote
0answers
103 views

how to reproject an image programatically in c# using gdal

I have to reproject an image programmatically in c# using gdal library. For the moment i'm a little bit lost in gdal and i don't really now which methods i have to use. I think i will have to ...
2
votes
1answer
90 views

Reproject “unknown” coordinate system to LCC 2SP across lon 180

Starting with a grib file with limited projection information, I am trying to import it as a GeoTiff in Geoserver 2.7.x. The original gdalinfo is: Size is 218, 81 Coordinate System is: GEOGCS["...
0
votes
1answer
134 views

Use lamber 93 imageOverlay with leaflet on top of OSM tiles layer

I'm trying to use a lambert 93 image overlay on top of an Open Street Map title layer. var map = L.map('map'); L.tileLayer('http://{s}.tile.osm.org/{z}/{x}/{y}.png', { }).addTo(map); var coords = { ...
0
votes
0answers
85 views

Define band specific metadata of a GeoTIFF file using GDAL (gdalwarp/gdal_translate)

Does anybody know how to change or set the "Description" option/tag (band specific metadata) of a GeoTIFF file using GDAL? To specify what I mean, this is an example of gdalinfo return from a GeoTIFF ...
1
vote
1answer
41 views

How to re-project only one band from a hdf?

I have this file which contains: gdalinfo product.hdf Coordinate System is `' Metadata: calendar=standard center=gsfc Subdatasets: Corner Coordinates: Upper Left ( 0.0, 0.0) Lower Left ( ...
1
vote
1answer
131 views

Clipping a coloured raster with polygon shp in gdalwarp changes original values, why?

I need to clip my raster based on a polygonal shapefile, basically leave raster values inside the polygon shape (inside red perimeter in the figure below) as shown here: Therefore, I use: gdalwarp ...
1
vote
0answers
63 views

Why does gdalwarp's cubicspline method expand into nodata areas?

The image below shows part of a peninsula on the Australian island of Tasmania. The black pixels are 9" climate data with GDA94 (EPSG:4283) SRS, projected by QGIS on the fly to Australian Albers (EPSG:...
2
votes
1answer
199 views

Mosaic Imagery using GDAL Edited

I have a couple of large sets of imagery I need to mosaic using GDAL. The sets are currently in tiff format with 18 tiles totaling about 20gb in size. I have attempted to mosaic using both the ...
0
votes
1answer
52 views

Raster extents incorrect for vrt when changing projection with -a_srs flag

I want to generate a .vrt in epsg:3857 from a series of raster tiles in epsg:4326, and am trying to do so in one step using gdalbuildvrt with the -a_srs flag: gdalbuildvrt -a_srs epsg:3857 ortho_3857....
3
votes
1answer
54 views

Wedge of missing data reprojecting to stereographic

I am trying to reproject an equirectangular projection image into stereographic around the north pole of mars using gdalwarp and I am not sure what is happening in my output image. The input image ...
1
vote
2answers
99 views

Use gdalwarp to crop area with simple coordinate system

I'm new to GIS and trying to cut image with gdalwarp I need image projected like google map and I need to input coordinates of area of interest in latidute longitute system, like: from 45.3 10.2 to ...
0
votes
2answers
45 views

How do I run gdalwarp on a number of csv of coordinates?

I have a CSV of Ground Control Points in NAD83 UTM 12N and I need to convert them to WSG84. Is it possible to do this with gdalwarp or something similar?
0
votes
0answers
73 views

GDALwarp: Re-projecting from EPSG<4326> to EPSG<3857>; problem: “double pixels”

I would like to change the projection from a png file that shows river pixels that exceed a certain threshold. Therefore I am following this workflow: (note: it is part of a larger R script) 1) ...
3
votes
0answers
147 views

How do I specify an outsize for gdal translations to an ENVI file?

I'm trying to create an elevation map using the output from gdal_translate. When I run gdal I can convert to both PNG and ENVI and combine the results to make something like the following image. ...
1
vote
1answer
103 views

Using Gdalwarp to Change Resolution of File in Degrees to Metres

I am using the command: gdalwarp -t_srs WGS84 -te 144 -36 150 -32 -crop_to_cutline AustTopo250_SI55.tif I need to change the pixel resolution to 50m x 50m but the option is given as -tr xres yres: ...
1
vote
1answer
85 views

Strange effect in gdalwarp output

I am using gdalwarp in python to extract and re-project reflectance bands from MODIS level 1B (MOD021km). An example of the command that I am using is the following: gdalwarp -of GTIFF -tps -t_srs ...
4
votes
1answer
296 views

Difference between gdalwarp and projectRaster

I am trying to project a Raster. In R there is the projectRaster() function to to this (below a fully reproducibly example) : # example Raster require(raster) r <- raster(xmn=-110, xmx=-90, ymn=40,...
1
vote
1answer
223 views

Unable to warp HDF5 files

I have numerous HDF5 files(.nc) which I need to batch process warp using one of the gdal utilities gdalwarp. When I tried to warp the files an error occurred: INPUT: gdalwarp -geoloc -te 109.975 3....
0
votes
0answers
45 views

Add hillshade to naip imagery

I've been searching for quite a while now. Is there a way to merge a hillshade image with an aerial image with gdal? I'm just trying to create a hillshaded aerial image.
1
vote
2answers
71 views

Black image using gdalwarp

Im a geomatics student; Currently, I try to geo-referencing a tif image with the QGIS GUI, and then I load and save the Gdal script. With the QGIS GUI, I managed to get a decent picture, then I ...
3
votes
1answer
35 views

gdalwarp reprojection causes missing data

I have tried to reproject and resample an SRTM DEM file from WGS84 to a cylindrical equal area projection. The problem is there is missing data as seen in the image below. The command I use is: ...
5
votes
0answers
183 views

can I preserve a fading alpha layer when mosaicing images with gdal?

I am mosaicing some images with gdal and would like to improve the final result by using a fading / gradual alpha layer towards the edge of each image to remove the sharp edges in the middle of the ...
1
vote
1answer
130 views

How to change the projection and resolution of a file using gdal?

I have a file with these information: lat_min -60.0 lat_max 80.0 lon_min -180.0 lon_max 179.9 lon_sampling 0.1 degree lat_sampling 0.1 degree samples = 3600 lines = 1401 I want to re-project the ...
2
votes
1answer
1k views

Properly Converting from UTM to Lat/Long with gdalwarp

I have a file in GeoTiff format in UTM coordinates. I convert the file to LatLong, then back to UTM, and the coordinates aren't what I started with. I have the printout of the process below. ...
0
votes
0answers
126 views

Create GeoTIFF from JPG and JFW files with gdal

I have a JPG image and the corresponding geospatial information on a JFW wolrd file in a ETRS89 geodesical system and UTM coordinates (EPSG:25830) 5.0000000000 0.0000000000 0.0000000000 -5.0000000000 ...
6
votes
2answers
234 views

How to convert the geographical projection of an extremely large file (GDAL)

My Task I need to convert 9 x 14Gb GeoTiff files to WGS84 geo projection. The rough size in pixels is about 200k x 100k. The data-type is byte and it is not a subject to interpolation, it is some ...
1
vote
1answer
106 views

Transform from Lambert Azimuthal “old” to ETRS89_LAEA

I'm currently struggling to convert a small .asc dataset with no defined projection. The projection that has to be first applied is Lambert Azimuthal "old" projection: In PROJ.4 +proj=laea +lat_0=48 +...
1
vote
1answer
103 views

Tilemill and GeoTiff not working together

Loading in a geotiff with projection of EPSG:4326 isn't fully rendering: The original: The original in Tilemill: When using gdalwarp to change the projection from EPSG:4326 to EPSG:3857, ...
0
votes
1answer
106 views

gdal_translate or gdalwarp to define projection

Which of these is the best approach to define (aka. set) a projection for a tiff? 1) gdal_translate -a_srs EPSG:32182 in.tif out.tif 2) gdalwarp -s_srs EPSG:32182 -t_srs EPSG:32182 in.tif out.tif ...
1
vote
2answers
476 views

gdalwarp changing value in nodata pixels

I'm using gdalwarp to convert MODIS NDVI mosaics from Sinusoidal to epsg:4326. To save space I'm using VRT files until I reach the final product. Here is my workflow. Mosaic NDVI Modis tiles using ...
0
votes
0answers
124 views

Cutting a shape from a VRT file with gdal warp

I have a couple of overlapping tif files which I want first to merge and then to clip a shape file from the result tif. The problem is that the tifs are pretty big and when the tiffs are overlapping ...
1
vote
1answer
940 views

jpg to geotiff transformation with gdal_translate and gcps fails

I am trying to create a geotiff from a jpeg by inputting gcps with gdal_translate: gdal_translate -of GTiff -a_srs EPSG:4326 -gcp [1616.0 0 -121.459869532 38.5822533549] -gcp [0 0 -121.460081357 38....
1
vote
1answer
136 views

Issues with getting the height from SRTM gdalwarp WGS84(EPSG:4326) to Mercator(EPSG:3857)

I am trying to use the SRTM .hgt file to obtain the height of a location. My issue is that I wish to reproject the SRTM file from WGS84 to Mercator but the height returned is not consistent after ...
1
vote
0answers
50 views

What is the kernel width of the gdalwarp resampling methods?

gdalwarp provides 7 resampling methods. How many neighborhood pixels do contribute to upsampling respectively downsampling? I will try to guess. Please correct, if values are wrong: Upsampling: ...
4
votes
0answers
36 views

Cropping EUDEM with GDAL creates zig-zag terrain

I have downloaded EUDEM (20 Gb) from http://www.eea.europa.eu/data-and-maps/data/eu-dem#tab-original-data When I try to crop it by GDAL using: gdalwarp -dstalpha -of EHdr -crop_to_cutline -cutline ...
0
votes
1answer
117 views

GDAL - Specify span of elevation values for conversion to Terragen format?

I'm attempting to use the gdal tools to convert some geotiff files I have to the Terragen format. I was hoping to use either gdal_translate or gdalwarp in a similar fashion to this post. (though I ...
0
votes
1answer
101 views

polygonize giving duplicated polygons

I am trying to reproject some ascii files and convert them into shapefiles. I am new to python but looking at some code online and help files I was able to write the following code to run on Python ...
0
votes
0answers
298 views

Reprojecting from Lambert Conformal Conic into EPSG:3857?

I'm trying to reproject a plain png image file into EPSG:3857 for use in an OpenLayers application. I'm pulling the image from the NWS site at: http://rapidrefresh.noaa.gov/HRRR/for_web/hrrr_ncep_jet/...
7
votes
1answer
1k views

Replicating result of gdalwarp using gdal Python bindings

I am trying to re-project/resample with the GDAL python bindings, but am getting slightly different results compared to those from the command line utility gdalwarp. See update below for shorter ...