Aligning geographic data to a known coordinate system so it can be viewed, queried, and analyzed with other geographic data.

learn more… | top users | synonyms (2)

2
votes
0answers
22 views

QGIS : transformation types in geo-referencing

Im a beginner in geomatics. I try some images georeferencing in QGIS. I would like to understand what is happening behind the different transformation types (linear, polynomial, Helmert...). What I ...
4
votes
2answers
79 views

Meaning of GCP in QGIS

Im a geomatics student, During a geo referencing with QGIS, a .Points file is saved. I open it with Notepad++ It is written under this form : mapX,mapY,pixelX,pixelY,enable ...
2
votes
1answer
51 views

Put png map image as a background to draw upon

I have an image of a fiber optics network map: I want to turn this map image (without any actual GIS data) into a vector map where each point is defined by lat, long. To do this, I'm trying to ...
0
votes
1answer
34 views

Import georeferenced dwg-files to SketchUP

I have a georeferenced dwg-file in a national projection and want to import it into SketchUp pro 2015 without loosing the georeference. My workflow so far was to import it into QGIS, check it's ...
1
vote
0answers
45 views

Georeferencing reversal of image

I georeferenced a map and it posted to canvas as a mirror image of the original map. I set my project CRS before starting and also made sure to set the same SRS for the Geotiff being created and ...
0
votes
0answers
20 views

algorithm of v.rectify, v.transform for georeference

Please can anyone tell me what algorithm is used in v.rectify and v.transform to georeference in Grass Gis. Binh grass.osgeo.org/grass70/manuals/addons/v.ply.rectify.html ...
0
votes
0answers
22 views

Grass Gis supports binary_little_endian 1.0?

Basically, I have a 3d point cloud (obtained by visualsfm) and want to convert it into a world coordinates model (unit: mm) by using ground control points. And, I found these addons v.ply.rectify, ...
1
vote
1answer
19 views

Georeferencing a raster on top of 2 or more polygons

I am trying to georeference raster sketch maps that have polygons drawn on them to line up with vector polygons. Its relatively easy to do this using the georeferncing toolbar in arcmap for 1 ...
0
votes
0answers
31 views

QGIS Georeferencer loading very slowly on multi-GB geotiff

I am trying to load a 2GB Geotiff (it's source coordinate system is WGS84) into the georeferencer for QGIS 2.6+. However, once I load the image, I see a blank raster canvas for nearly 10 minutes ...
0
votes
0answers
30 views

Dealing with multiple georeferenced, but possibly slightly offset datasets

I have elevation data stored at 5 meter resolution in a raster file. I would like to go in and add this data into a database (lat, lon, elevation.) I have another rasterfile with other data, also at ...
0
votes
1answer
34 views

Google Earth image projection transformation question

I have taken a JPEG image snapshot of an area on google earth. Within it I marked and record the coordinates of the four corners. I then added and georeferenced the image to a map I was already ...
0
votes
0answers
12 views

Problems in overlaying NWS flood maps on Google maps

Hope you are doing good. My team is trying to overlay NWS flood maps on to Google maps. The steps we are following are as given below. We downloaded the flood maps from NWS in the raster format ...
1
vote
0answers
18 views

QGIS Georeferencer adds padding to image after save

I am attempting to georeference an aerial image using satellite imagery. I'm successful in getting an output, however I notice there is an issue where QGIS's georeferencer is adding padding to all the ...
0
votes
1answer
48 views

Georeference a polyygon within a pdf file [duplicate]

I have this pdf file that contains a specific borough of my city, Montreal, with a polygon inside it. Link to pdf file: PDF FILE The jpeg image once exported from the pdf file is the following I ...
1
vote
0answers
20 views

How to best import a US Map Schematic?

I would like to use the following wiki US Map schematic as a background to my map work. (http://en.wikipedia.org/wiki/File:Blank_US_Map.svg) It is a .svg file, and GeoReferencer is unable to import ...
1
vote
0answers
26 views

QGIS, GDAL Georeferencer missing?

I've just installed QGIS 2.8 on the new Fedora 22 (64) that came out some days ago. Awkwardly, I can't find the GDAL Georeferencer that, to my knowledge, is supposed to come with every installation. ...
0
votes
1answer
45 views

Georeferencing raster in QGIS

Georeferenced raster in the QGIS not filmed the final display by raster footprints. Everything is in EPSG 32633. Path in GdalToools: Red is original footprint for image. I need rotate image ...
0
votes
0answers
21 views

Unable to select anything when Georeferencing shapefile in ArcGIS for Desktop? [duplicate]

I have a shapefile I converted from PDF > CAD > shp and I want to georeference this using Georeferencing toolbar. However it will not let me select anything. I've tried turning editing on, but ...
2
votes
2answers
47 views

Is it possible to georeference raster stored in Postgis?

I'm looking to store a huge raster aerial image (400 Gb) into Postgis, but before storing it i like to know how i could georeference or rectify raster stored in postgis ? is there any Qgis plugins ...
0
votes
0answers
12 views

Georeferencing of OMI Swath product in ArcGIS

I am using Aura OMI UVB Level 2 Data Product-OMUVB (V003) to monitor solar irradiance over Pakistan. This is a swath product with He5 format so i have used panoply to open it. I exported the ...
0
votes
0answers
34 views

Georeference a computed tomography image without changing its proportions in QGIS

I have several images obtained from a Micro computed tomography (mCT). The scanned elements are human teeth. In a particular mCT slice, I have introduced a cartesian plot with its X and Y axis. The ...
0
votes
0answers
25 views

How to Georeference / manipulate 3D raster into a 2D

i have given a 3D raster and ask to reference it . i have a 2D outline of what the top layer of the 3d raster is expressing . i have added an example of the 3D here , ignore the depth information and ...
1
vote
1answer
34 views

Why can't I paste coordinates in “Enter Map Coordinates”?

Using QGIS 2.6.1-Brighton, I am attempting to use the Georeferencer. My data is from NGS datasheets. I copied and pasted the data into a text document. In the "Enter Map Coordinates" dialogue, when I ...
0
votes
0answers
32 views

Rototranslation + scale of pdf and dxf with USER CRS in QGIS? [duplicate]

i have a map PDF or DXF to georeferenced with only rototranslation + scaling. I use EPSG: 32632, also the map that I need to import is a survey (maxmimal dimension 5000 m x 5000 m), but his coordinate ...
0
votes
0answers
49 views

How to properly import georeferenced .dxf hatches/polygons into QGIS?

I have a georeferenced AutoCAD-drawing (some district borders I vectorized with Illustrator from a raster image), saved as a 2004 ASCII .dxf-file. When I import the file in QGIS ("Add Vector Layer"), ...
1
vote
1answer
35 views

Satellite image vertically squeezed after being georeferenced

I am using ArcGIS for Desktop 10.1. I am trying to georeference a Google Earth image in Christchurch area, New Zealand. I am using some CGPs I have got from this image (their Google Earth ...
1
vote
0answers
48 views

How to add geospatial info to an existing PDF?

I work with a small non-profit mountain bike trail advocacy organizationand as a result have created a number of PDF-based maps. These are all Mercator projection, built off of OpenStreetMap data, and ...
0
votes
0answers
34 views

Linear units do not correspond after georeferencing map?

In ArcGIS 10.1, I georeferenced an archaeological settlement plan. The georeferecing was made identifying Ground Control Points on the online aerial imagery provided by ArcGIS itself. 4 GCP were used ...
0
votes
0answers
16 views

georeferencing envi data with lat/lon in arcmap

I need to georeference gridded ENVI files or rather add georeferencing to the metadata. I do have the lat/lon of the corner points of the data and the spatial resolution. Any suggestions of how to put ...
0
votes
0answers
29 views

Georeference Error Messsage QGIS

I'm trying to georeference a 1922 map of Africa by Bartholomew. (found here http://www.davidrumsey.com/maps5268.html). I have it in QGIS and currently the Raster has the default CRS (WGS 84). I have ...
0
votes
0answers
9 views

Georeferencing of ROI in ENVI?

I had an image which is not georeferenced for my study area. I have processed the data and made roi files in envi 4.7. Now I have georeferenced the image data. I have a doubt that whether the roi ...
0
votes
0answers
25 views

ArcGIS Online no spatial reference

My intention is to georeference an image so as to create a Swipe Map in AGOL. First, I add my control points, rectify, then analyze before attempting to share and finally publish in AGOL. The other ...
1
vote
1answer
196 views

What causes wrong placement of JPGs in QGIS 2.8.1?

I have the same issue explained in this post: How to keep georeferencing from ArcGIS when importing raster into QGIS? But my problem is with .jpg files. I have georeferenced with ArcGIS 10.2.2 many ...
1
vote
1answer
69 views

Georeferencing/Spatial Adjusting of vector river dataset to DEM in ArcGIS

I have a huge dataset of vector river data (over 10'000 rivers) which are saved in a shapefile and were initially derived from a topographic map. However when comparing this vector to DEM data (SRTM ...
1
vote
1answer
40 views

Climatic data sets

I did a bulk download of climatic data from http://neo.sci.gsfc.nasa.gov/ in png format so that I will extract my ROI(Africa). After the download I loaded them in Arcgis and discovered they are not ...
2
votes
1answer
44 views

Georeferencing in R Based on the Four Corners

I have a raster image (photograph) that was taken from a helicopter. Along with that raster image, the system also tells me the positions of the four corners of the image in a different file. I have ...
1
vote
1answer
70 views

Georeferencing Old Mining Maps (Floetzkarte des Oberschlesische) in QGIS?

I am trying to georeference some old mining maps (Floetzkarte des Oberschlesische) in QGIS 2.9. I have already tried to do that by marking known points on present satelite photos, but the results were ...
0
votes
0answers
25 views

How can I create a warp mesh to match two close but not identical datasets together?

I have two datasets for Mars. One of them is the Mars Viking color mosaic, the other the Mars Global Surveyor black and white imagery. When I overlay the two datasets, it becomes obvious that the ...
3
votes
1answer
83 views

Misalignment of EPSG:4326 and EPSG:3399 coordinates

I'm having a QGIS project in local coordinates (Gauss-Kruger, EPSG:3399) with some layers in the same reference system. On top of that, I want to display point coordinates, which I digitized using ...
2
votes
0answers
122 views

Merge several images and Export a GeoTiff File

I have approx 500 geo-referenced images that I was hoping to merge into 1 geo-referenced file, and export it as a single geotiff file. To be used in AutoCAD Civil 3D I know I am pushing my luck and ...
0
votes
0answers
68 views

Georeferencing raster imagery using UTM eastings and northings

I have a scanned cadastral map in raster form and UTM co-ordinates in northings and eastings for that area. Is there any way that I can directly georeference my map using E/N values without converting ...
1
vote
1answer
36 views

Is it possible to overlay ungeoreferenced raster images in the QGIS Desktop Browser?

Afternoon ladies and gentleman, I work for a company that produces Mining Investigation reports for property in the South West of England and I have spent the last 12 months digitising abandoned ...
1
vote
0answers
35 views

Wetterzentrale maps georeferencing - coordinate system?

I'm trying to georeference two maps from wetterzentrale in ArcGIS. In what coordinate system are those maps created?
0
votes
0answers
26 views

Georeferencer does not open when clicked

Since a week my raster georeferencer is not opening when I click it. I have made sure it is checked in the plugins collection and have tried re-installing the newest version of QGIS, yet also in this ...
0
votes
0answers
53 views

QGIS Georefencer Failed to compute GCP transform

I am a new QGIS user. I am trying to georeference a scanned paper map. After uploading map to the georeferencing utility and assigning 12 ground control points to map and assigning a datum I get a ...
0
votes
1answer
85 views

trying to build world file for images based off extent rectangle generated from centroid in python

I have centroids for map images which I would like to georeference quickly and rougly via python script, using arcpy. I know the dimensions of the images, the dpi, scale, rotation and the coordinate ...
0
votes
1answer
33 views

Georeferencing in ArcGIS - Zero-Order (Shift)

Zero-Order (shift) transformation is meant for rasters that only require shift, which as i understand it means moving or translating the image. Two questions: Does it mean that two or more control ...
0
votes
1answer
62 views

How to fit polylines to their true position?

I have a satellite image and CAD data of the same area. The polylines from CAD to not overlay correctly on the satellite image. I want to fix polylines to their true coordinates but I could not fix ...
1
vote
1answer
75 views

QGIS georeferencer: Thin Plate Spline (TPS) residual

1) Is anyone able to explain in simple manner what does mean error exactly mean? I use metric values, so suppose 3.64109 is expression of meters and "e" is mathematical constant: ...
2
votes
0answers
57 views

Georeferencing/rectifying multiple images of different shapes and sizes at once using ArcGIS for Desktop?

A couple of weeks ago I georeferenced a set of 7 scanned maps (.tiffs). Although the scans all have different shapes and sizes, the outline of all the maps on there is the same, and after having ...