0
votes
1answer
48 views

Georeferencing image using QGIS?

I am very new at this and when I georeference an image in qgis, I get the same image georeference but rotate and elongated. I use 3 control points to georeference the image but whatever I do, I get ...
0
votes
1answer
22 views

Process to georeference corners of vector file?

I am new to QGIS and trying to wrap my arms around it so please bear with me. I have vector files (DXF) that I need to add back in the georeferencing. They were edited with Illustrator so I loose ...
1
vote
1answer
71 views

How to exactly georeference in QGIS

When I georeference a raster image in QGIS, it's always a bit displaced as in the attached image (the cyan polygon is the template, the red border is the georeferenced image), although I try to set ...
0
votes
1answer
43 views

How to overlay a jpg onto a google earth image?

I have produced a model from an online engine , and it is in a google earth picture. I want to georeference the below picture and apply the boundaries here on my google earth image. I'm using QGIS2.2. ...
0
votes
0answers
29 views

qgis's georeferencer renders my white map with a translucent blue tint, can I prevent this?

I'm running QGIS 2.0.1-Dufour on MacOSX and when loading a PNG or TIFF into qgis as a raster its always getting rendered with a blue tint. Here's what it looks like before being loaded into QGis's ...
0
votes
1answer
47 views

georeferencing an image from GoogleEarth

What I actually want to do is very simple, however, there seems to be a bug: I have an image from GE which I want to georeference and set as a background layer. I thus set some placemarks on GE, ...
0
votes
1answer
47 views

How to georeference a map - which is in projected coordinate system - using geographic lat long? [duplicate]

We have some hard copy maps which were projected in Gauss Kruger coordinate system (in the legend it has been mentioned). But, the coordinates were given in Geographic lat long (Beijing 1954). In ...
0
votes
2answers
61 views

Geo- referencing Projected coordinated raster with GCS - ArcGIS

I have raster displaying Lat/ Long grid, but map information shows that, it s been mapped in Gauss Krugger projetion/ Beijing 1954. So, technically we need to geo reference the map in Gauss Krugger/ ...
0
votes
1answer
54 views

Georeferencing PNG against Google maps with openlayers plugin

I am trying to georeference blueprints to the footprint of a building. I'm using the Google Satellite image from the plugin to do this. The blueprints are rotated about 30 degrees. When I run the ...
0
votes
1answer
111 views

JPEG base map doesn't match shapefile locations

Relative Newbie Question: I have Civil War earthworks tied to the State Plane Coordinate system with a jpeg of the terrain as a 100k scale USGS Quad of the area that is not georeferenced. When I work ...
7
votes
3answers
233 views

Merge images first, or georeference first?

I'm wanting to georeference and vectorise some features from scans of the OS 1896 Town Plans that I have purchased from the NLS (http://maps.nls.uk/os/london-1890s/info.html). The scans provided are ...
2
votes
1answer
34 views

How to fix “The selected file already seems to have a world file!” when image hasn't been georeferenced before?

I am georeferencing historical aerials from 1988 in QGIS 2.2.0. Sometimes it works perfectly and other times after I have places my points and start the georeferencer a window pops up saying: "The ...
0
votes
1answer
106 views

How to remove black box around georeferenced grayscale image in QGIS?

i'am trying to georeference a grayscale image (*.tif) in QGIS 2.2.0 Valmeria. It is working but QGIS draws a black box around the georeferenced raster image. If i use the option set 0 transparent, not ...
3
votes
2answers
53 views

What is the closest CRS to “Meridiano de Greenwich”

I have a 1906 scanned map that I am trying to georeference in QGIS for Mac. The map has French and English lat-long, indicating them as either "Meridiano de Greenwich" or "Meridiano de Paris." I would ...
0
votes
1answer
63 views

Georeferencing an aerial image based on satellite imagery

As part of a bigger project I need to georeference an aerial image based on a landsat image downloaded form usgs. I use qgis. can I somehow place the layers on top of each other and mark certain ...
1
vote
1answer
27 views

Changing georef backgound colour

Working with a greycale scanned image: when I georef that image it rotates (expected) the blank corners are then filled with black. When the new image overlays I need to make those corners ...
2
votes
1answer
265 views

Georeferencing an image with GDAL, based on QGIS Georeferencer Plugin

I would like to georeference an image with GDAL. The image already has a spatial reference set (EPSG:31276). For the georeferencing, I have a list of 4 ground control points (also in EPSG:31276). ...
0
votes
1answer
120 views

How can I correct a .pgw file for a PNG image?

I have a PNG file and I need its .pgw file to be set with NAD 83 as the projection. I have created a .pgw file: 799 0 0 -799 -122.562 37.1946 However when I open the PNG in QGIS or ArcMap 10.2 it ...
0
votes
1answer
36 views

How can I locate additional GCPs?

I'm a new user of QGIS. I'm georeferencing a scanned image of topographic map. At least 16 GCPs were required for us to locate. However, only 12 can be located and can be identified and be defined ...
1
vote
2answers
234 views

How do I open images georeferenced in ArcMap in QGIS? (.aux.xml)

We have several ArcMap georeferenced images (raster datasets) that we are attempting to open in QGIS without any luck. These are not inside of a geodatabase and are not Arcinfo Binary Grid format or ...
3
votes
1answer
78 views

Re-registering a GEOTIFF in qgis

I'm working on some images taken from a UAV over the course of a year. They are OSGB 1936 projection as is the whole project. Annoyingly they don't quite line up so I am trying to a few of the images ...
1
vote
1answer
62 views

Why do features in QGIS drawn on same datum as Google imagery from OpenLayers move? [duplicate]

I have just started using QGIS. I've loaded the "openlayers" plugin and added a google hybrid layer, which is based off the WGS84 datum to my understanding. Now I create a shapefile and add a new line ...
1
vote
1answer
105 views

Is there a bug in Georeferencing in QGIS 2.0?

I recently updated to QGIS 2.0. But now, when I need to georeference some pictures, I have serious problems. When loading the files to be georeferenced, I can see only a part of it in the window, so ...
1
vote
1answer
57 views

Georeferencer plugin will not load in QGIS

I have downloaded and installed QGIS. I would like to georeference an image using the core georeference plugin. When loading it no toolbar appears and the 'update', 'reinstall' etc boxes in plugin ...
2
votes
1answer
96 views

Loading / georeferencing OS rasters in QGIS

I have got some OS rasters but there isn't georeferencing file (TFW) with them. When I try to load them, it will obviously load in the wrong place. They are loading fine in a different GIS software ...
3
votes
1answer
104 views

What are the set of projections that can be accurately georeferenced using polynomial 2?

Background I'm starting with a map from the internet (Encyclopedia Britannica) and georeferencing it using QGIS 2.0.1, I get really accurate georeference solution using polynomial 2 transformation: ...
1
vote
1answer
109 views

Why does georeferencing reduce the image resultion?

I'm trying to use a raster as a base image in my QGIS project. It is a building schematic which is fairly high resolution. Importing this into QGIS, it seems that the only way to re-position an ...
0
votes
0answers
18 views

Transformation type - when to use which type? [duplicate]

I am using QGIS 2.0.1 on a Mac, and I am georeferencing a scanned map from 1822. The image is an excellent quality scan, and includes a grid of lat-long. I do not know much else about the map that ...
2
votes
1answer
76 views

Georeference image is mirrored

I'm working with QGIS and I'm trying to geo-reference a tobin lease map. The map datum: NAD27, projection: UTM Zone 14N. The process to georeference is fairly straight forward but the results I'm ...
4
votes
1answer
81 views

Area calculation of an object without coordinates

I have a photo of an object with a scale and I want to calculate its area. I guess I have to create a polygon of the area to be calculated to use the 'field calculator'. But how do I tell the program ...
1
vote
0answers
52 views

What do you think is happening to my QGIS Georeferencer

I'm pretty new with QGis, but have used tools as Openlayers and Geoserver for some years now without never being asked to diplay a georeferenced raster image. Which gets me to use QGis in order to ...
4
votes
1answer
301 views

Historical U.S.G.S. Georeferencing

I have downloaded a historical USGS map that is suppose to be a geoPDF. My understanding is that QGIS cannot directly read geoPDF's. I have not had any luck in converting it to a geoTIF in order to ...
2
votes
2answers
206 views

Georeference vector linework

I'm new to GIS and a lot of searching didn't answer my specific question so far, so I hope someone can help me here. What I want to do is creating a small web application to visualize election ...
2
votes
1answer
213 views

Problem with georeferencer in Qgis 2 64bit installation

I tried to use the georeferencer in the new Qgis 2 64 bits for windows. I tried with the standallone installer and with the OSgeo4w installer. The problem is when I load the raster that I want to ...
2
votes
1answer
159 views

QGIS Georeferencer, unexpected transformation, and GCP placement

Im trying to get the sample map which i believe to be EPSG:3112 into QGIS and geo referenced. In my screenshot, on the right is the raster in georeferencer with the points i have added. On the left is ...
1
vote
0answers
172 views

Georeference to UTM projection using openlayers plugin in QGIS

I have some aerial imagery that I need to georeference using QGIS into a UTM projection. In order to do this I need a basemap layer for the reference points. The openlayers plugin could work great ...
1
vote
0answers
51 views

QGIS: georeferencing report: tail cutted off

I'm using QGIS 1.8.0-2 to georeference some old maps and want to report residuals and other information via the PDF report function of the Georeferencer tool. If there's too much information, it's cut ...
1
vote
2answers
118 views

QGIS:what does it do “snap gcp coordinates to background layers” in the Georeferencer plugin?

Maybe is too obvious, but I don't find any precise documentation about this checkbox in the georeferencer plugin.
0
votes
0answers
28 views

how to georeference a shapefile layer [duplicate]

i have some shapefile layer have wrong position and size. it's similar with raster image. so i need scale and move it to correct place. the question is how can i do this in qgis ? i found a plugin ...
2
votes
1answer
359 views

How to align (georeference) images using QGIS?

I'm completely new to all this. I'm trying to make a map of Han dynasty-era China for a mod for a game called Crusader Kings 2. I've downloaded QGIS and Natural Earth 2, but I need this image to ...
-3
votes
1answer
189 views

How can I open georeferenced ArcMap raster files in Qgis?

How can I open georeferenced arcmap raster files in Qgis?
2
votes
1answer
222 views

Orthophoto in QGIS to georeference for use in Sketchup 8, or how to match it with Sketchup 8 pictures?

I have a high resolution orthophoto of an area I want to rebuild in sketchup and therefore want to lign it up (georeference it properly), but all the scaling and everything I tried so far did not help ...
2
votes
2answers
172 views

What is causing this distortion in QGIS georeferencer results?

When importing a JPG map using QGIS's georeferencer plugin, the resulting map layer is distorted and does not look anything like the map that I am trying to import. I can't work out what is causing ...
1
vote
1answer
43 views

Cannot See Georeferencer Results

I am working in QGIS 1.8.0 Lisbosa. Currently I am trying to georeference a building blueprint in a .TIF format to a Google Streets layer. After selecting four points (the corners of the building), I ...
0
votes
2answers
320 views

georeference IMG file in qgis

I have a problem: I'm trying to georeference a satellite image (ASTER, Erdas Imagine file *.img) in QGis. I have georeferenced with QGis before and never had any problems. The file is georeferenced ...
1
vote
1answer
100 views

Worsened image quality and false colours after georeferencing

When I georeference a map of vegetation types (about 20 colours, each representing a certain vegetation) the quality of the georeferenced map is really bad and some colours have changed (e.g. black ...
5
votes
1answer
263 views

Georeferencing a jpeg in QGIS but the scale is way off

I've gone through the really helpful walk-through(s) of how to georeference a jpeg in order to make it a layer, but after inputting the coordinates (either by typing in actual coordinates or clicking ...
0
votes
1answer
815 views

How to georeference PNG images using QGIS? [duplicate]

How can I georeference png images using QGIS, running on OSX? I've looked at ExifTool, and the plugins GeoTag and Import Photos + Photo2Shape. These tools (and other answers) as far as I can tell ...
1
vote
2answers
168 views

Problem with reprojecting raster from MGI 6 to WGS

When I reproject a raster from Mgi 6 to WGS 84 using Warp in Quantum gis it makes mistake ( about 380m). Is there any way to avoid this?
1
vote
1answer
118 views

Is it possible to fix a vector layer after I badly georeferenced a map? [duplicate]

Sorry in advance if I missed another question on this topic. I searched for everything I could think of, but I didn't find anything with a solution to my problem. I am quite new to GIS tools and ...