Aligning geographic data to a known coordinate system so it can be viewed, queried, and analyzed with other geographic data.

learn more… | top users | synonyms (1)

2
votes
2answers
85 views

How to adjust data digitized from an erroneously georeferenced basemap?

I have made quite a big georeferencing error, by attributing one of the control points of the map with a value that is 2 km less than the actual value, on the horizontal axis. The georeferenced map ...
2
votes
2answers
230 views

Georeference vector linework

I'm new to GIS and a lot of searching didn't answer my specific question so far, so I hope someone can help me here. What I want to do is creating a small web application to visualize election ...
2
votes
1answer
106 views

How to determine if an image file is georeferenced

I have a task to scan a folder for georeferenced images. There might be a lot of images, some quite large, and some not georeferenced. The spatial information can also be either embedded or in a world ...
2
votes
1answer
219 views

Problem with georeferencer in Qgis 2 64bit installation

I tried to use the georeferencer in the new Qgis 2 64 bits for windows. I tried with the standallone installer and with the OSgeo4w installer. The problem is when I load the raster that I want to ...
0
votes
0answers
51 views

Informations about API in GDAL for geocoding

I write to ask you if did you ever used the new API in GDAL for geocoding. (Link for description: http://www.gdal.org/ogr/ogr__geocoding_8h.html#a2b0382ceb7e3935d7fe1da2adada564e ). Do you know what ...
1
vote
1answer
150 views

Merging many map sheets together into one large sheet for later georeferencing?

I have hundreds of images, each one is a scan of a map sheet, and I want to georeference them. The maps cover a large area (a whole country), they just split the area into many smaller cells. Each map ...
2
votes
1answer
173 views

QGIS Georeferencer, unexpected transformation, and GCP placement

Im trying to get the sample map which i believe to be EPSG:3112 into QGIS and geo referenced. In my screenshot, on the right is the raster in georeferencer with the points i have added. On the left is ...
0
votes
0answers
77 views

Batch inserting georeference information into a tiff image

I have metadata (example below) and images that have no projection or coordinate information (gdalinfo output below). I am looking for help with a script using OSGeo4W tools or some software to ...
2
votes
2answers
132 views

Batch rectifying 200+ historic aerial images?

I have acquired historic aerial imagery for the surrounding towns, circa 1954, and the images have no georeference. I am looking for software to help me batch-rectify the 200+ images. I have current ...
1
vote
1answer
124 views

How to link 2 different images in eCognition

I'd like to link 2 different images in eCognition to find the same pixels on both images. The images have same projection (geog lat/long). How can I do this? Thank you so much
1
vote
0answers
185 views

Georeference to UTM projection using openlayers plugin in QGIS

I have some aerial imagery that I need to georeference using QGIS into a UTM projection. In order to do this I need a basemap layer for the reference points. The openlayers plugin could work great ...
0
votes
2answers
186 views

How to georeference a raster based on identical, already georeferenced raster

I have two identical rasters, one has been georeferenced, the other has not. I would like to georeference the second raster automatically using the first one. I do not want to create links by hand and ...
1
vote
0answers
43 views

Condensing sparse geocodes to weighted Geo-Circles?

I have a data-set comprising of 3 million records having latitude and longitude information associated with it, I want to condense it to form few thousands Geo-Circles, with radius and weight ...
1
vote
0answers
51 views

QGIS: georeferencing report: tail cutted off

I'm using QGIS 1.8.0-2 to georeference some old maps and want to report residuals and other information via the PDF report function of the Georeferencer tool. If there's too much information, it's cut ...
1
vote
2answers
131 views

QGIS:what does it do “snap gcp coordinates to background layers” in the Georeferencer plugin?

Maybe is too obvious, but I don't find any precise documentation about this checkbox in the georeferencer plugin.
0
votes
0answers
51 views

How to create a raster from a CAD scan for ARCMap?

I have scans of CAD streets and such and want to get a raster for georeferencing into ARCMap. What are the easy steps to make a targa, geotiff, etc. of a known size, say 2 miles along one side as a ...
1
vote
0answers
39 views

Georeferencing a Picture having Resolution and a nearly correct BBOX

Is it possible to get the Boundingbox of a Picture when I know the Resolution, the Height/width in pixels, the sum of Tiles in each row/column and a Coordinate that is in the cornertile but not the ...
1
vote
1answer
297 views

Specify world file to use in ArcGIS

I have a BMP file where I know the coords of the corners, and hence have a generated a World File according to ESRI's standards. It has the the right filename, but when I add the image in ArcMap, it ...
2
votes
1answer
396 views

How to align (georeference) images using QGIS?

I'm completely new to all this. I'm trying to make a map of Han dynasty-era China for a mod for a game called Crusader Kings 2. I've downloaded QGIS and Natural Earth 2, but I need this image to ...
1
vote
1answer
245 views

How to get bounding box coords?

How to get coords for NW and SE if we have about 4-5 pixels on the image with assigned latit/longit? I'm working on javascript app which would overlay that image on Google Map then. Thanks.
0
votes
2answers
296 views

Calculation for conversion of Lat/Lon to World Geographic Reference System (GEOREF)

Does any one have a reference to, or the actual code, to convert Lat / Lons to Georef code (http://en.wikipedia.org/wiki/Georef)? I am also interested in finding a conversion from lat/lon to MGRS. ...
-3
votes
1answer
206 views

How can I open georeferenced ArcMap raster files in Qgis?

How can I open georeferenced arcmap raster files in Qgis?
1
vote
0answers
504 views

Create a jgw file for jpg image.

I converted ecw file into jpg file with IrfanView, to display the jpg as base layer in openlayers. I understood that I need to create a jgw file to display the jpg file. I found this example: ...
1
vote
0answers
60 views

Is there a “yellow pages” web service for Europe?

I need to put some European businesses on a map, but I only know the country of these businesses. I am looking for a way to obtain a lat/lon position or an address for each. What "yellow pages" web ...
2
votes
1answer
183 views

Geoserver: Georectification via SLD fails

Situation I have a raster image and the coordinates of its four corner pixels. My goal is to warp the image with respect to this coordinates ("georectify") on the fly when requested via GeoServer to ...
0
votes
1answer
141 views

converting grid references to long/lat

If I import from a POST DB a set of points that are referenced by grid reference, will the long/lat decimal also be added to the file? or will I have to convert the points to long/lat myself? In ...
2
votes
1answer
238 views

Orthophoto in QGIS to georeference for use in Sketchup 8, or how to match it with Sketchup 8 pictures?

I have a high resolution orthophoto of an area I want to rebuild in sketchup and therefore want to lign it up (georeference it properly), but all the scaling and everything I tried so far did not help ...
7
votes
2answers
451 views

How to Georeference Photos With No Spatial Reference?

I have about 100-200 field ground shot photos I would like to overlay in ArcGIS 10 that have no spatial information which I need to somehow develop using a photogrammetric formula. The camera was ...
2
votes
2answers
184 views

What is causing this distortion in QGIS georeferencer results?

When importing a JPG map using QGIS's georeferencer plugin, the resulting map layer is distorted and does not look anything like the map that I am trying to import. I can't work out what is causing ...
1
vote
2answers
48 views

Cannot See Georeferencer Results

I am working in QGIS 1.8.0 Lisbosa. Currently I am trying to georeference a building blueprint in a .TIF format to a Google Streets layer. After selecting four points (the corners of the building), I ...
0
votes
2answers
339 views

georeference IMG file in qgis

I have a problem: I'm trying to georeference a satellite image (ASTER, Erdas Imagine file *.img) in QGis. I have georeferenced with QGis before and never had any problems. The file is georeferenced ...
1
vote
5answers
239 views

Create world file from kml

I have a KML file for a NASA image. I want to create a world file from it so I can use the image in say QGIS. Is it possible to extract the key info (bounding coordinates) from the KML? It seems to be ...
1
vote
2answers
3k views

How to add georeferenced TIFF to AutoCAD 2010

I have a ~6GB georeferenced (from ArcGIS) .TIFF satellite image that a colleague wishes to add to AutoCAD 2010. He wants it as a base layer for digitising features from. I have searched forums but ...
1
vote
1answer
101 views

Worsened image quality and false colours after georeferencing

When I georeference a map of vegetation types (about 20 colours, each representing a certain vegetation) the quality of the georeferenced map is really bad and some colours have changed (e.g. black ...
11
votes
1answer
266 views

Assign projection to a satellite image

Today I stumbled upon a picture taken from the ISS looking down Europe and it is really beautiful. So, I started thinking I could add more to the picture. Like world borders, cities, road network, ...
3
votes
2answers
209 views

How to create georeferenced and projected data from hand-drawn map?

I am preparing datasets for students in a spatial statistics course for a module on spatial autoregressive models. We will use ArcGIS 10.1. The first dataset will correspond to a mythical ...
1
vote
0answers
49 views

how to get correct geo reference system for a VMap

I am new to GIS, trying to read the GeoRef System for VMap by using the following code: OGRSpatialReference *ref = layer->GetSpatialRef(); if( ref ) { QString georefSystem = ...
5
votes
1answer
281 views

Georeferencing a jpeg in QGIS but the scale is way off

I've gone through the really helpful walk-through(s) of how to georeference a jpeg in order to make it a layer, but after inputting the coordinates (either by typing in actual coordinates or clicking ...
1
vote
1answer
135 views

No clue of the Georeferencing tool in gvSIG

I have kept trying to locate the georeferencer in gvSIG but I could not find it. Some tutorials say it is under Tools from the main menu! I installed several versions of gvSIG, both on Windows and ...
0
votes
1answer
939 views

How to georeference PNG images using QGIS? [duplicate]

How can I georeference png images using QGIS, running on OSX? I've looked at ExifTool, and the plugins GeoTag and Import Photos + Photo2Shape. These tools (and other answers) as far as I can tell ...
1
vote
0answers
97 views

Join .csv file and .shp of georeferenced points

I have georeferenced a map and saved a selection of some points on the map. These points are cities of departure and arrival and I want to join the .shp with a and excel .csv with the information of ...
10
votes
1answer
516 views

What is some theory on the number of GCP when georeferencing?

Just wondering, is it always better to have more than 3 GCPs? Should the GCPs be spread out evenly? Where can I find some general resources on the theory of this? Other than trial an error, which ...
14
votes
3answers
368 views

Which CRS would you use to georeference historical world maps?

Which CRS would you recommend to georeference historical world maps like the ones in the London Geographical Institute - The Peoples Atlas - 1920, e.g. The map displays a lat/lon grid which I would ...
1
vote
2answers
180 views

Problem with reprojecting raster from MGI 6 to WGS

When I reproject a raster from Mgi 6 to WGS 84 using Warp in Quantum gis it makes mistake ( about 380m). Is there any way to avoid this?
1
vote
1answer
120 views

Is it possible to fix a vector layer after I badly georeferenced a map? [duplicate]

Sorry in advance if I missed another question on this topic. I searched for everything I could think of, but I didn't find anything with a solution to my problem. I am quite new to GIS tools and ...
2
votes
3answers
369 views

How to batch-process georeferencing of rasters (prelude to animation)?

I have many (10k) raster files, all with identical size and pixel dimensions, which need to be georeferenced. I would like to georeference one of them manually, using either QGIS or GRASS, and then ...
0
votes
0answers
250 views

QGIS WMS didn't show georeferenced tiff

I try to reference image and use them via WMS. Chouse project CRS to EPSG:900913 Add OpenStreetMap source using gdal wms <GDAL_WMS> <Service name="TMS"> ...
0
votes
1answer
148 views

Can you use a large file directory of jpgs for without georeferencing

I have a large map data set of 256x256 jpg images. The file directory is organized by /map_type/zoom/x/y.jpg. I have 12 zoom levels and each zoom level directory has 2^(2*zoom level) images. I have ...
3
votes
3answers
112 views

How to match air photo to existing vector layers on Mac OS?

I'm trying to add an air photo to a project and match it to existing data. CanVec data is mostly based on the old CIA dataset of the 60's and is hopelessly out of date, but the roads are up to date - ...
6
votes
1answer
383 views

ISIS to GDAL to QGIS: Georeferencing Mars Images

I'm trying to use QGIS to view some images from the Mars Reconnaissance Orbiter Context Camera. I use ISIS3 to download the images and convert them to mapped .cub files, following the instructions ...