GeoTIFF is a public domain metadata standard which allows georeferencing information to be embedded within a TIFF file.

learn more… | top users | synonyms (1)

11
votes
2answers
758 views

How to reproject raster from 0 360 to -180 180 with cutting 180 meridian

I have a geotiff raster image that has a coordinate system with longtitudes from 0 to 360. The horizontal center of the image is 180 longtitude. See image below: I want to transform it to EPSG:4326 ...
2
votes
2answers
3k views

GDAL: Convert specific RGB (GeoTIFF) color to transparent

I have an RGB GeoTIFF file and I want to convert a specific RGB colour to transparent. I would like to use GDAL for doing this, but external Python scripts are also an option (though I haven't learned ...
5
votes
1answer
1k views

How to import GeoTIFF via postGIS into GeoServer?

As a simple test case, I'm trying to configure the software stack of OpenGeo such that I can display a GeoTIFF as an overlay to a normal map like OSM. So I perform the following steps: Create a ...
1
vote
1answer
632 views

Using arcpy.mapping.ExportToTIFF() to create dataframe geotiff

Has anyone created a dataframe geotiff using arcpy.mapping.ExportToTIFF() with satisfactory results? My output has poor quality and the georeferencing is significantly off. This example is the ...
0
votes
2answers
2k views

convert geotiff to simple xyz elevation file?

I have looked everywhere and can not find a tool to convert a geotiff file to a simple ascii elevation file... did I miss something? thanks for any pointers!
18
votes
6answers
5k views

Should GDAL be set to produce GeoTIFF files with compression? Which algorithm should be used?

I have a folder of GIS data that consists mainly of GeoTIFF files. The whole set weighs in at about 1.2 GB. I noticed that if I pack the contents into a tarball, it smashes down to about 82 MB. I ...
5
votes
3answers
7k views

Batch convert GeoTIFF's to KMZ files

I have about 600 GeoTIFF map files, each about 140 mb in size that I'd like to convert to KMZ files so people can download them and use them with Garmin GPS units, Google Earth, etc. Anyone know an ...
2
votes
2answers
2k views

How to convert .geotiff --> .tiff?

How to convert .geotiff files to .tiff files (ordinary plain images)? Basically, I have cropped the image to a rectangle of interest and knowing its left-lower location and having chosen the pixel ...
1
vote
1answer
416 views

GeoReference tiff image into the Google map?

I want to Geo-reference a tiff image contain a Map for a specific region, I need to add this region(image) and Geo-reference it on the Google map, SO I can see on the map for the region I select the ...
4
votes
2answers
487 views

GEOTIFF explanation of .aux xml and tfw world file

I want to know how raster images work, I have a set of geotiffs that has no aux, tfw or xml when I check the spatial information in arccatalog, they do have an projection. and they shows correctly. ...
4
votes
1answer
570 views

affine transformation on geotiff

I have a bunch of geotiffs stored in a PostGIS DB that i am mounting on my OpenLayers map. They all have the geoTransform information in them. I just want to know how i can mount them on my ...
3
votes
1answer
645 views

Serving 4 band GeoTIFF in GeoServer 2.1.4

I have an uncompressed GeoTIFF file (figure 1) with the following band information: Image Structure Metadata: INTERLEAVE=PIXEL Band 1 Block=5000x1 Type=Byte, ColorInterp=Red Band 2 Block=5000x1 ...
2
votes
2answers
719 views

How to convert a .tif with .tfw to a GeoTiff?

I have a tif image file, and a .tfw world file (created from OSM data with Mapertive). How can I (using linux command line) convert that to a GeoTIFF file? (i.e. I want to have one file, not 2). I'm ...
2
votes
2answers
2k views

Can WMS be used to get a local copy of raster data?

I have tried reading up on WMS on wiki and other sources but haven't managed to get my head around a couple of points. 1) Using WMS is it possible to get a local copy of the raster data (say a tiff ...
0
votes
1answer
40 views

GeoTIFF created using ArcGIS for Desktop not displaying in Google Earth or Photoshop?

I originally had an IMAGINE Land Cover raster file that I opened in ArcMap. I used the Extract Feature from Raster to extract only the Developed class and saved it (still IMAGINE). Then I used the ...
0
votes
0answers
78 views

not able to view imported .tif file in geoserver

I am using geoserver. I have imported a .tif file using postgis, which has been saved in vector type layer in geoserver. Now, whenever, I preview it, the layer gets automatically downloaded as wms ...
-1
votes
2answers
68 views

.tif and .tfw to GeoTIFF [duplicate]

I have a .tiff and a .tfw file that I want to change into a GeoTIFF. When I try to open the file in ArcMap and ENVI 5.0, it is successful. However, in Google Earth it is not. Is there anyway to ...
12
votes
2answers
2k views

GeoServer: Best way to publish 2500 TIFF or 71 ECW files?

I have ortophotos of an area that I need to serve as a background map for my vectors. I got it as 2500 files (71,5MB each) in raw TIFF format with corresponding TFW word file - 180GB of data. ...
6
votes
1answer
2k views

How to get GDAL to create statistics for GTiff in Python

I regularly create my own GeoTIFF rasters with GDAL in Python, e.g.: from osgeo import gdal from numpy import random data = random.uniform(0, 10, (300, 200)) driver = gdal.GetDriverByName('GTiff') ds ...
4
votes
2answers
841 views

GeoTiff size - what to do?

I have a whole series of GeoTiff tiles, each one about 250mb in size, in total just over 90gb. I want to be able to display these as a wms into QGIS to 20+ GIS users and in the end make them into a ...
13
votes
3answers
6k views

How do I change geotiff “no data” color to white/transparent rather than black?

I am preparing data for inclusion into a geonetwork node, where the maps are displayed via geoserver. The problem is that cells that have"no data" are displaying as black in the geotiff and I am would ...
6
votes
3answers
13k views

Steps to creating a GeoTIFF

First off, I'd like to mention that I'm pretty new to working with GIS, so please forgive my inexperience. My situation is as follows: I'm tasked with georectifying a set of imagery and importing ...
5
votes
1answer
944 views

What's the best way to display a huge Aerial image using Geoserver

I have an Aerial image - Almost 1.5 GB , GEOTIFF - and i have been trying to add it as a layer in Geoserver .. Adding the layer went successful , but the performance were very bad . I tried to cache ...
4
votes
1answer
543 views

Extract coordinates for series of georeferenced files in ArcGIS 10?

I have a series of 1900 spatially continuous images that are georeferenced. Each image is a tif file paired with a tfw file. These images are easily open and shown in ArcMap 10. However, I need a way ...
9
votes
2answers
422 views

What is the correct way to convert a USGS Orthoimage from WorldImage format to tiled GeoTiff for GeoServer?

USGS provides different resolution orthoimage quadrangles in the WorldImage format (*.tif with an accompanying *.tfw world file). Some of these quadrangles can be used by GeoServer (2.1.0 - 2.1.2) by ...
6
votes
2answers
293 views

How to generate TFW files for a list of images?

I have a few digital images that are not georeferenced. E.g.: Img01.tif Img02.tif ... Img99.tif On the other hand, I have a text file, which contains georeferencing information for these ...
6
votes
1answer
1k views

Creating a mask with transparent pixels in python

I have a geotiff image with pixel intensities ranging between certain values. Lets say bewteen -2 and 2 (the image is normalized). I have a certain threshold which interests me, lets sat 1. I would ...
1
vote
2answers
227 views

Convert .tiff data to bitmap just when rendering and at runtime by visualC++ code

I need to convert a .tiff image to a bitmap one without saving the bitmap. I know that I should use GDAL_translate but because I'm new, this function's interface is a little complicated for me. Could ...
8
votes
3answers
750 views

Best way to manage large number of geoTiff rasters

I have around 2-3000 1-bit geoTiffs of size 11000x9400. Color 0 should be transparent, and QGis gets it wrong in the first place, so I used a .vrt file to set all the parameters in one single place. ...
5
votes
1answer
860 views

Why do TIF loaded into PostGIS lose their colormap?

I have successfully loaded a TIF image (using raster2pgsql) into my PostGIS 2.0.1 database. I can load the raster image into QGIS and it displays in the correct space. However, it has lost all colour ...
5
votes
2answers
4k views

GeoTIFF file creation from .Tiff file

im not sure if this question is suitable for GIS I'm working on a software that displays a map, like this ![enter image description here][1] i also have some export functions which exports the the ...
3
votes
3answers
1k views

GDAL_translate: converting ESRI GRID to Geotiff in batch

The Challenge: To batch convert 1000 rasters in ESRI Grid binary to Geotiff using either using a batch file or Python 2.7 without ArcGIS/Arcpy module. The Tools: Win7Pro, GDAL 1.9.2 (via OSGeo4W), ...
3
votes
1answer
427 views

Grid registration issue converting from GeoTIFF to ARC ASCII Grid

I've got a 3 arc second digital terrain model represented as a 32-bit GeoTIFF that looks like this: $ gdal_info gom03_v1_0.tif Driver: GTiff/GeoTIFF Files: gom03_v1_0.tif Size is 10200, 7800 ...
2
votes
1answer
459 views

Finding lat/lon of corners of geotiff file

I am a GIS newbie. I just recently managed to turn a GeoTIFF file into a bmp file using gdal_translate. Now I need to find the latitude/longitude coordinates of the corners. I would prefer to use ...
2
votes
5answers
1k views

How do I turn a GeoTIFF file into a bmp file?

I need to get GeoTIFF files transformed into bmp files so that I can display them as apart of some software that I am working on. Unfortunately, I am a total newbie with GIS and really don't know much ...
1
vote
1answer
93 views

gdal2tiles generates small picture inside 256x256 tile

I've used gdal2tiles for generating tiles in number of different polar projections and always experienced the same problem — strange small picture inside normal 256x256 png with the rest of space ...
1
vote
0answers
83 views

Touch up tool for rasters?

I was wondering if it were at all possible to manipulate/massage rasters (eg Geotiff) using Qgis plugins or Grass?? By manipulate, I mean manually smooth off interpolation artefacts, blended surface ...
1
vote
1answer
121 views

SetColorInterpretation() for a GeoTiff using GDAL not working

I have a single band image which I would like to copy to a 3 bands of a new image and set the ColorInterpretation to red, green and blue respectively. I have tried two approaches, one using the GTiff ...
1
vote
1answer
458 views

How to understand GeoTIFF tags?

I'm trying to understand GeoTIFF info, but not getting far. For instance, using listgeo with one file I can get this output: Geotiff_Information: Version: 1 Key_Revision: 1.0 ...
0
votes
1answer
74 views

Issue with `-sds` naming convention in gdal_translate

I'm converting ~100 .hdf files to .tiff using gdal and getting some unfortunate naming conventions when using -sds for %A in ("...\*.hdf") do gdal_translate -of GTiff -sds "%A" "%A.tiff" However, it ...
0
votes
1answer
243 views

How to get raw values from OGC Web Coverage Service (WCS) via ArcGIS for Desktop 10.1?

I posted this a few days ago to the ArcGIS Discussion Forum but have had no response so thought I would try here as well. I'm new to Web Coverage Services (WCS) but have found it easy to add one ...
0
votes
1answer
4k views

ArcGIS 10 GeoTIFF Export

I'm not terribly familiar with ArcGIS in general, but I have a geodatabase (I think) containing a 3m DEM in ArcGis 9.3. I would like to have this 3m DEM in a GeoTIFF file so I can do some processing ...