Use the `raster` tag for questions about raster datasets. A "grid" is a regular partition of a spatial domain into congruent nonoverlapping pieces or a set of lines forming a grid-like pattern (aka "graticule").

learn more… | top users | synonyms (1)

0
votes
0answers
9 views

convert csv file into grib2 format using wgrib2

I have used wgrib2 in terminal.And convert grib2 file into csv file to view content of grib2 file.my command is, wgrib2 CMC_naefs-geps-raw_ARAIN_SFC_0_latlon1p0x1p0_2014022012_P012_allmbrs.grb2 ...
0
votes
0answers
14 views

How to create correct vector grid in meter

I want to create a vector grid, with squares of 100x100m but have some serious trouble in solving this apparently easy task. I already read all the posts, but didnt find a good solution. Here is what ...
1
vote
1answer
56 views

how to permanently add raster to satellite image in qgis

As mentioned in the title i need to integrate a raster to a satellite image but have no idea as to how to do this. I tried the add grid function and it works nice but is not permanent. I insert it ...
1
vote
1answer
37 views

How to determine in which grid cell where each coordinate of an x,y series is located?

I have a circular arena which I have divided into a number of equal-sized 'cells' using a grid-like arrangement of concentric circles and line segments (in grey below) and also a series of x,y ...
1
vote
1answer
65 views

gdal_grid has some problem with reading vrt file

I am using gdal_grid module(from gdal 1.10) and it has some problem with reading the vrt file. I checked this link but it does not work. gdal_grid problem reading vrt file The command is ...
2
votes
1answer
742 views

UTM Grid as a Layer with Leaflet

How can I display a UTM Grid as a layer with Leaflet? Search a way to embed a OpenStreetMap map with Leaflet in a website. Particularity. I want to display a UTM Grid as a Layer. In addition, lower ...
0
votes
1answer
50 views

Why do I get an error when I try and clip a shapefile to a shapefile using ogr2ogr?

I want to clip a shapefile to a shapefile. The input shapefile is a 1 m vector grid generated in QGIS. The tile I'm clipping to is just a simple polygon (the geometry is contained within the 1 m ...
11
votes
4answers
1k views

How can I generate irregular grid containing minimum n points?

Given a large (~ 1 million) sample of unevenly distributed points - is it possible to generate irregular grid (in size, but could also be irregular in shape if that is possible?) that will contain ...
3
votes
1answer
144 views

draw lines with an angle inside a rectangle in python

I am trying to make a plugin for Qgis with python. I have the four corner coordinates for a rectangle. I want to give the user the inputs, line space and angle (0 -180 degrees). With these inputs, I ...
1
vote
1answer
27 views

What is a better idea for modelling a fault plane than as TIN? [duplicate]

I am working on a project which runs on ArcGIS platform using VB.NET. It is to model a sub-surface fault plane (currently a plane rectangular model with some dip) and then to find required distances ...
1
vote
2answers
68 views

How to draw a square from 2 coordinates?

I have a CSV file with the following output id, x min, y min, x max, y max, value 1 , 0 , 0 , 100 , 100 , 5 2 , 0, , 100 , 100 , 200 , 10 3 , 100 , 100 , 200 , 200 , 15 4 , 100 , 0 ...
1
vote
1answer
91 views

ArcGis: Rotated grids and cell size

I am using ArcObjects, namely RasterGeometryProc, to apply rotation on grids. The transformation works fine. However, when looking at the grids properties in ArcGis, the cell sizes has changed. ...
0
votes
0answers
33 views

adding a column containing buttons in dojo grid arcgis jsapi

I am using ArcGIS jsapi to develop a web application where I use a synchronous geoprocessing service that return a shapefile. I used the shapefile table to populate 2 dojo grids depending on the value ...
2
votes
1answer
35 views

Creation of tiled grid in JAVA with geotols

I am trying to create a grid using GeoTools in JAVA, covering specyfic area with resolution 50 m (distance between two points). To do so I have two points: the most nortwestern (let's call it NW) and ...
0
votes
1answer
74 views

How to create a grid after merging shapefiles?

Follow up question to QGIS Model Builder Script - Possible to merge layers in a folder? I think I'm missing something very obvious here but can't seem to find it. After merging shapfiles in a folder, ...
0
votes
0answers
16 views

Changing tracks to vectors in a grid

This is a version of a question that I posted on the GRASS list, but I didn't get any suggestions there. I would like to overlay a grid (cell size about 500 m x 500m) over an animal track created from ...
1
vote
1answer
91 views

Creating grid polygons from coordinates using R or Python

I have locational data with north-south and east-west coordinates, with a resolution of 100 meters squares. Each data point's location is somewhere within the 100 meters square which centre is given ...
0
votes
0answers
37 views

how to compare multiple time series of raster files

I am looking for the best way to compare the spatial patterns of multiple time series composed of many raster files, in R. The cell values of each raster is continuous, and I am comparing time series ...
0
votes
2answers
158 views

ArcGIS: Export GRID to TIFF keeping its (classified) symbology

I want to export an esri grid-raster into a *.tiff without losing the symbology I created for the grid (the symbology is classified). No matter how I try to solve it I get a stretched symbology in ...
0
votes
0answers
19 views

gdal_grid data from 2 different utm zone

I'm developing a component which grid data over Vietnam region using gdal_grid from gdal. Follow gdal example I've successfully griding data within 1 specific UTM zone. However, for data over the ...
2
votes
0answers
46 views

How to move points to another polygon based on attribute?

I have a point layer and a grid cell/fishnet layer. Each point falls within a grid cell. Now I want to move some of the points to another (the nearest) grid cell based on an attribute that exists in ...
0
votes
1answer
84 views

Auto increment a new column using Model Builder Field Calculator in QGIS?

I am making a model which requires creating a grid and clipping various layers to it. Using the Create grid function does not provide an ID column, instead it creates 2 columns: "longitude" and ...
0
votes
1answer
56 views

Surfer problem - overlapping grd bln

I have the following problems with Surfer: 1, I have a grid file and a bln but i'm not sure that they overlap each other exactly. I set the coordinate system with grd and bln! (WGS84) but there is no ...
4
votes
2answers
1k views

How to read this GRIB data [closed]

on this open FTP server (ftp://ftpdatos.aemet.es/modelos_numericos/hirlam005_peninsula/) you can find HIRLAM models from the Spanish meteorological service. The documentation in the LEEME files (in ...
1
vote
0answers
72 views

Is there a decent algorithm in QGIS Process Modeller to create a grid?

I am using Process Modeller to automate merging several vector layers and then creating a grid to cover the extent of the merged layer. There are functions which already exist which are not listed in ...
0
votes
0answers
32 views

How to deal with political boundaries in grid cell analysis?

I have point data for Africa and I want to aggregate these data to grid cells which I create by a fishnet. Some grid cells cover parts of 2 or 3 countries. Normally, such cells are by different ...
2
votes
1answer
43 views

How to set default values for reference grid in ArcMap?

I currently use ArcMap 10.2 and find it quite handy to be able to set default values for settings such as Labeling Properties, ensuring new maps use relative paths and to always build pyramids for a ...
1
vote
1answer
78 views

Parameter values to create a vector grid with 1km x 1km cells?

I created a shapefile from WKT in QGIS using the values from this link. I want to create a vector grid with 1kmx1km cells but I can't figure out what values need to be set for the X and Y parameters. ...
0
votes
0answers
28 views

How to accurately join data based on 1x1 degree grid-cell points to a shapefile

In the data file each row represents a country and a grid-cell at 1x1 degree resolution, and the given coordinates, in longitude and latitude, label the south-west corner of the grid-cell. The ...
0
votes
0answers
15 views

Can a joined-layer have its attribute changed depending on what layers are selected/deselected?

Using QGIS, I have a polygon-grid layer which covers everything, Layer_All joined with 2 other grid layers: Layer_1 and Layer_2, both of which intersect at various points. I would like Layer_All to ...
0
votes
0answers
16 views

Edit a classified grid file (.grc) to improve accuracy

I have a .grc file (classified grid file) which contains some clutter information, forest, sea, woodland, etc... I need to alter the data in some area to improve accuracy. Basically a larger forest or ...
0
votes
0answers
25 views

Does a road connect one grid cell to an adjacent grid cell?

So here is the problem I am working on. I have an OpenStreetMap roadmap which I overlaid with a 2-D cartesian grid. So for a given grid square, I want to find out if a road segment continues from the ...
3
votes
2answers
402 views

How to display DMS in QGIS print composer?

Can we display degrees, minutes, seconds in QGIS Print Composer window instead of decimal degrees? Is there any plugins available for that? Thank you very much.
2
votes
2answers
193 views

How to convert a shapefile to a grid file

I was wondering whether anyone might be able to tell me in layman's terms how to convert a polygon layer to a Grid file in ArcGIS 10.1 or ArcGIS 10.2?
0
votes
1answer
38 views

How to Lock Grid and Scalebar in QGIS Atlas

Have just started using Valmeira and I am looking at generating an Atlas. I am using irregularly sized features as the index. The challenge I have, is when I set up the template page and scalebar ...
3
votes
1answer
143 views

GIS beginner - interpolating contour lines from TIN-model vs. Grid in ArcGIS

I am a complete beginner in GIS and taking a class right now, and we are doing some assignments in ArcGIS - ArcMap. In one of them we were given a shapefile with heightpoints. These had been manually ...
0
votes
1answer
62 views

Grid Index Features ArcMap 10.0

I am developing a custom script for a small company. The rule of this script is to create something like the Split tool but in Basic License level. So, at first, I Would like to create an Index ...
3
votes
2answers
287 views

Creating DSM and DTM from a LAS using a freeware solution

Is it possible to export a surface and terrain model files from an aerial, LiDAR point cloud (LAS) set? I am using SAGA GIS for very basic operations, but I couldn't find this option (and I have a ...
3
votes
2answers
994 views

Conversion of GRIB and NetCDF to my database

. I have downloaded "High Resolution Initial Conditions" climate forecast data for one day, it was in extension .tar.gz so I extracted it in my local directory and I get the files like in the ...
6
votes
3answers
518 views

Overlay a spatial polygon with a grid and check in which grid element specific coordinates are located

How can one use R to split a shape file in 200 meter squares/sub-polygons, plot this grid (incl. ID numbers for each square) over the original map below, and evaluate in which square specific ...
2
votes
1answer
130 views

Combining Geological Grids

I have a situation where I have 3 Geological grids, each showing a different horizon + the Seabed Grid. I need to extrude between these grids in order to make the 3D polygon for the geological ...
1
vote
2answers
25 views

attach point grid data non-grid points

Possibly a strange one: I have a dataset with loads of fields of environmental (explanatory) data, as a regular grid of points (black dots in image), and another dataset of sampled (response) values ...
1
vote
1answer
40 views

Split Grid data into 4

I am using ArcGIS software I have a Feature Class layer that represent a Grid network, which consists of rectangles that covers all the areas. I want to use it to generate another feature class layer ...
2
votes
2answers
1k views

Meridian convergence. True north, magnetic north and grid north

I'm having difficulty wrapping my mind around meridian convergence, the horizontal angular distance between true north and grid north. Say I want to determine if a feature lies to the east or west ...
1
vote
1answer
84 views

How can I add grid lines to a print composition using pyqgis?

I'm writing a qgis plugin to create an image in the print composer of the current map. I can get the map rendered in the proper place with a frame of the right width, and I can get grid annotations ...
2
votes
2answers
81 views

How can I get repeated vector grid in horizontal direction?

I need to get repeated vector grid layer in horizontally direction. I created many polygon vector grid layers, and their extents as listed bellow (Xmin-Ymin, Xmax-Ymax): Layer 1: 5910000 3040000 ...
1
vote
2answers
45 views

How can I change vector grid extents in QGIS?

I created many vector grids, but later I discovered that I need to modify some of their extents, hence, How can I change vector grid's extents (xmin, xmax, ymin and ymax) in QGIS?
1
vote
1answer
78 views

How can I style many layers of vector grid once in QGIS?

After I created many of vector grid layers, I now need to style them in a batch system. Is there any way to do this? If that is not possible, how can I use the layer duplicate option to inherit the ...
1
vote
1answer
37 views

How to hide grid's labels when zooming out?

I have used polygon grid layer on my map, and I used to label the layer with ID automatically, and the result was convenient for me: But when I zoomed out, the labels didn't hide at all! and they ...
1
vote
2answers
228 views

Are British National Grid (BNG) 1km grid shapefiles displayed accurately in ArcMap?

I have downloaded the UK Ordinance Survey's 1km grids in shapefile format for ArcMap. If you need to download them to have a look first you can find them here look for link in the first Answer to the ...