0
votes
0answers
37 views

Township/Range polygon to Line labeling

I'd like to use a township range in my maps where the labels are right on the border of the polygon like the image attached. I've read that I can do this by converting a polygon to a line but I can't ...
2
votes
1answer
44 views

Can I change how Maplex decides which duplicate labels to remove?

I have a lot of recreation location points, and most of them are labeled. Sometimes there are many points close together which really only need one label. For example, the recreation location below ...
1
vote
2answers
51 views

Font Formatting in Advanced Label Expression ArcGIS/Python

Almost have this quandry figured out, but inevitably a new problem has popped up. I finally have the "code" part down to do what I want, but now the font formatting isn't acting properly. When I use a ...
3
votes
1answer
57 views

Conditional formatting for Advanced Label Expression in ArcMap

I am trying to do some conditional formatting in order to highlight specific criteria. The main error I keep getting is that there are no features found. I've done a simple label with the exact same ...
1
vote
1answer
18 views

dermacation label

i have 3 different features which are country.shp, division.shp district.shp what should i do if i want to make the label is arrange like figure 1 because when i label all the features using ...
0
votes
0answers
24 views

VBScript for Advanced Labeling in ArcGIS

I found a template I thought might be useful to create a table of sorts for a label. I modified it with my variables, but it still doesn't seem to be working. I'm not very familiar with VBScript, but ...
1
vote
1answer
26 views

Getting syntax error in Label Expression

I am receiving the SyntaxError: invalid syntax(string, line 26)(last line in this case) when I am trying to make this label expression for use in ArcMap. As far as I can see, everything looks right. I ...
2
votes
1answer
35 views

Can I create a circle label with a leader in ArcMap?

I want to create a circle label with a leader using the standard Maplex labelling engine and symbology. Only 1 or 2 digit numbers will appear in the label. I can easily make square or rectangular ...
1
vote
2answers
48 views

Formatting label expression with newline using Python parser? [duplicate]

I'm having trouble with syntax in 10.2.1, and have have tried just about everything. With arcpy, I am attempting to access a label.expression of an ArcMap layer and modify it to: lbl.expression = ...
0
votes
1answer
33 views

Labeling a Feature Class - how to force the label to use a particular field

I am trying to make a map with the voter blocks labeled. The label command uses the county identifier field. Can I force it to label with the voting block field?
0
votes
0answers
39 views

Label changing with time slider using arcGIS

I have a list of lat/long locations with a time associated with them. With those locations I did a spatial join to find the total amount of points in each polygon. I would want to do is gradually ...
0
votes
1answer
32 views

Consistent label sizing with Data Driven Pages

I've set up a map document with a number of maps, using DDP with a polygon feature class as an index layer. Two of the layers have labels and I need to manually adjust the position of many of the ...
5
votes
0answers
43 views

How to switch off symbol when label is unplaced due to conflicts? [duplicate]

Using either the standard ArcMap labelling engine, or the Maplex engine, it is possible to automatically omit labels from the map when the area is too congested. Eg in the centre of this image, ...
0
votes
1answer
80 views

How to programatically modify the placement properties for labels

Does anyone know how to modify the location of a label programatically? I'd like to make the labels sit directly below the symbol!
0
votes
0answers
11 views

SHP to DWF with centerline and annotation (labels) [duplicate]

I am looking for a way to dump a street network (shp) into CAD but also include a text layer for street names (labels). Is this possible? I feel like there is likely an easy solution but I can't seem ...
1
vote
2answers
69 views

Showing percentage symbol in ArcGIS map labels?

I'm trying to show percentage poverty per municipality on the map I'm working on, and I have the percentage values displayed on the map, but I don't know how to get the percentage symbol itself to ...
0
votes
2answers
72 views

How to delete individual labels?

How do I delete an individual label without converting the entire data frame into annotation?
0
votes
2answers
76 views

ArcGIS Label zoom visibility

ArcGIS 10.2.2 on Windows 7 32 bit (new Win 7 computer arriving tomorrow). I'm a complete novice to ArcGIS starting now (June 2014), so speak loud and slow... I have 10 years of experience with GIS ...
2
votes
3answers
71 views

How to create labeling similar to this map?

Any ideas on if ArcMap is able to create labeling similar to this map? Ie. 95xx or 9500 is listed outside of the units and the the actual last 2 digits are listed within so that each unit does not ...
0
votes
1answer
69 views

Background label shows above all annotations and layers

I'm using ArcMap 10, and have a very dense map of Detroit with many point features. To lay out the labels properly, I converted the labels to annotation (stored in the map, not in a geodatabase), and ...
0
votes
4answers
116 views

ArcGIS Labeling Expression when truncation needed to fit in some polygons? [closed]

What would be the expression coding for if the address is 14802. But if the whole address cannot fit inside the building dimessions, then it should be truncated to the last two digits - 02. I am ...
0
votes
2answers
74 views

Labeling features with font dependent on polygon area?

i want to label my island data with variety of size of text based on the island area for example island that have more than 100km, i want to label it using Arial 12 while island less than 100km i ...
1
vote
0answers
41 views

Labelling street address ranges [closed]

I have checked out http://resources.arcgis.com/en/help/main/10.2/index.html#//00s80000005p000000 But I have been getting stuck on step 3> Create a label expression for the left- and right-side ...
5
votes
2answers
87 views

Removing features whose labels are not displayed?

Using ArcMap 10.0, I am working on a map that shows many villages. Each village has a name attribute that I want to use for a label, but in some areas there are so many villages that not all can be ...
1
vote
0answers
51 views

How to import label classes to make symbology classes?

In Answer to an earlier Question I was able to write SQL Expressions to create label classes. Now, I wish to use those label classes to create symbology classes. It is possible to make label ...
-1
votes
1answer
60 views

How to Label Field With Multiple Selected Values?

I have a shape named "Subdistrict" and it shown on Attribut Table like this : No | subd | village 1 | town1 | v1 2 | town1 | v2 3 | town1 | v3 4 | town2 | v4 5 | town2 | v5 6 | town2 | ...
0
votes
2answers
109 views

How to prevent labels from one layer from overlapping features in another layer

I am working ArcMap10.1 software. When I was labeling on point feature automatically label fall on line. Label must not fall on line. I'm not aware how to solve this issues. I have attached an ...
1
vote
5answers
244 views

Labeling dilemma

How would you label this map logically? I will preempt the question, with the statement it is for a fire truck, so we really have to worry about seeing the address numbers at 3 am with one contact in. ...
1
vote
1answer
94 views

Add line break to ArcMap 10.2 label expression

How can I add a line break to a jscript label expression? My expression so far looks like this function FindLabel ( [NAME] ) { return [NAME]+'National Forest'; } I would like to add a break after ...
4
votes
1answer
113 views

How to write labels with varying significant figures/decimal places?

I have results that range from ex. 113,009 down to 0.00495 - Can someone recommend a way to write/construct a label expression for the following in ArcMap: • If less than 1, use 2 decimal places ...
1
vote
1answer
69 views

ArcGIS Label Manager 10.2 takes 20-30 seconds to load

Why does label manager take 20-30 seconds to load? I am on 10.2 with a SSD and 24gb of RAM. Does anyone else have issue loading the label manager in ArcMap? Is there any way to speed this process ...
2
votes
0answers
68 views

ArcGIS labels with expression not appearing [closed]

I have a layer which should be labelled based on two different fields. I've chang the Expression in Layer Properties from [FIELD1] to [FIELD1] + '\n' + [FIELD2]. However, only Field1 is showing in my ...
9
votes
2answers
184 views

Is there a method to have the colour of a label automatically match the colour of the polygon indicated in the symbology tab?

My job requires that I produce several print maps every day, for a variety of different users. It is usually pretty straight-forward, but sometimes I have to make a map that uses rather ...
0
votes
1answer
23 views

Inactive remove duplicate labels function, what's up with that?

I am using arc 10 and I am having a heck of a time getting duplicate labels to not appear. The remove duplicate labels in the conflict detection tab is checked but inactive or non selectable. I ...
2
votes
3answers
80 views

Display multiple attributes for one point

I am using ArcGIS 10. How can I display multiple attributes for a single point. For example, I would like to display (graphically if possible) the amenities provided at various recreational areas... ...
0
votes
1answer
57 views

Is there a way to keep labels and symbols from displaying inside an extent indicator?

I've been working on a utilities map and have been asked to turn off the labels and symbols within the extent indicator on the larger scale map and show them only in the detailed map. Is there a way ...
2
votes
1answer
69 views

Labeling only the latest feature

I need to label only the latest feature in a particular feature class. I actually would like to automate it, so that when I will add any new feature to this feature class, the label will automatically ...
0
votes
0answers
34 views

Labeling mulitple interests stacking problem [duplicate]

I am using ArcView 10.1 and am using this code to no avail in the Labeling Properties [Company_Ne] &VBNEWLINE& [Exp_Date_O] I know there is a way but am not familiar with the scripting for ...
0
votes
0answers
17 views

Export ArcGIS labels to CAD - need help troubleshooting [duplicate]

I know this question has been answered before on various forums (also here1), but I have followed the instructions step by step and understand them completely yet still can not seem to get labels to ...
1
vote
2answers
90 views

Labeling stacked polygons with different records

I work in Oil and Gas and trying to label leases is a huge pain. In most cases there are multiple polygons of the exact same size and shape stacked on each other with records that represent different ...
1
vote
1answer
190 views

How to Use Label Expression with Text Formatting Tags

I am using a Label Expression to label a parcel layer. The expression is: "<FNT name=""Arial"" size=""12"">" & [Owners_Nam] & "</FNT>" This works correctly for some labels, but ...
0
votes
2answers
92 views

2 labels, 1 query - 1 a symbol and the other text: How?

I have a problem: I am trying to add a label to a feature that has two fields embedded in it. The first field simple has two numbers and I would like them to be placed within a circle (text symbol - ...
2
votes
2answers
114 views

Labeling large number of streets in ArcGIS

Anyone know of a decent way to label a large street network for large scale printing that doesn't involve manual editing/shifting? Even with advance placement properties there seems to be a number of ...
2
votes
1answer
200 views

Why is Maplex making all my labels disappear?

I've got a shapefile with 300+ points in it, and am trying to organise the labelling. I installed a trial version of the Maplex licence, as via some research I've come to the conclusion that this ...
6
votes
1answer
192 views

How to position callout bubble leader using maplex?

I'm using data driven pages to produce a number of maps. I'm using Maplex to have a callout bubble labeling my features. The problem is that for about 5% of the features, the callout bubble is not ...
0
votes
0answers
44 views

How to show point labels with rotation and offset

In ArcGIS 10.2, I have a point layer with street names and rotation field. I need to use the rotation field AND show labels with an offset and centered on top of the points (I want all names to ...
2
votes
0answers
66 views

How do I keep my callout boxes from looking wrong when the data frame is rotated?

I sometimes like to rotate a data frame in a layout, for example to fit more on the page if my area of interest is rectangular and runs from, say, northeast to southwest. But when I do, something ...
1
vote
1answer
56 views

Leader lines not rendering when converted to PDF

This is very puzzling, I have an annotation feature class stored in a geodatabase that contains labels with leader lines. The leader lines show up perfectly in the .mxd, it is only when I export to ...
1
vote
0answers
24 views

Is it possible to use If/Then Statements with dynamic text in Data Driven Pages? [duplicate]

Is it possible to use If/Then statements with dynamic text in Data Driven pages labeling? I have been trying a bunch of different ways, but it has not been working, and I am fairly new at writing ...
0
votes
1answer
41 views

Weighting a data frame within another frame for map creation

I've currently got an inset data frame sitting in a corner of a larger data frame. Some labels are being half covered by the smaller data frame. I was wondering if there are any tips on how to weight ...