A GIS software sold by Pitney Bowes Software.

learn more… | top users | synonyms

0
votes
2answers
43 views

PRACH all counters plot not well visualized

Here's the output that Im getting: Im not sure why it is doing this.. I want it to be more like this When i try plotting only two counters (two radii): It is giving me this: I hope it is ...
0
votes
1answer
29 views

Edit listbox and table value from a dialog box

Good day! I have a code that import my table on a listbox and able to add on it. i was stock on some codes when i double click a selected value on my listbox to open another dialogbox to edit (the ...
0
votes
1answer
40 views

Unable to determine translation results - Universal Translator in MapInfo

I would like to export my table from MapInfo to ArcMap. Problem is that I get the error "Unable to determine translation results" and "FME EXE stopped working". I know that there might be many causes ...
0
votes
2answers
74 views

Dynamic connection between Mapinfo and a database

I'm trying to create a dynamic connection between a database and a Mapinfo table. My database countain only one table, with a list of bus stops, characterized with their ID, name, and X Y coordinates. ...
0
votes
1answer
22 views

How to setup an ODBC Connection with Access database in Mapbasic

Good day! i'm trying to setup an ODBC connection in my Access database through mapbasic code, but i don't how should i start this code. I could make it manually and able to have a link between my ...
5
votes
1answer
557 views

Apportioning Points at a street intersection (arcgis or mapinfo)

I can't seem to find any evidence of this question, but I'm surprised by that, so pardon if this has been asked. If one is mapping crime location reports, by XY coordinates to streets, to create ...
0
votes
1answer
26 views

Recovery of MapInfo transaction files (*.TMA, *.TIN, *.TDA)

MapInfo (v 12.5.1 - 64 Bit, Release Build 122) just crashed on me while I was in the middle of modifying several tables and adding a few new ones to an existing Workspace. Unfortunately the changes ...
2
votes
2answers
739 views

Where does MapInfo store its Coordinate Systems?

When choosing a projection in MapInfo, there is a large list of available coordinate systems. Where is the file that stores these and is it easily editable?
2
votes
1answer
141 views

Creating migration flow map using MapInfo?

my first post on this forum :) Being a beginner in Mapinfo, I didn't find any tutorial on creating a thematic map of migration flows, something like; or I tried Arrow40 extension but couldn't ...
3
votes
1answer
29 views

Exporting BNG coordinates from MapInfo (27700) without rounding

I have a TAB file in ESPG 27700 projection and MapInfo is rounding Y coordinate values upon export. It also occurs when viewing the table (although selecting the value shows its 'true' form) Upon ...
0
votes
1answer
188 views

Mapinfo Runtime is throwing error

when i am trying to call MapInfo from my PowerBuilder application, With map info pro(full) version "Open table" command is working fine but with mapinfo runtime(proviewer) "Open table" is crashing ...
0
votes
1answer
31 views

Creating points from variable without long/lat using MapBasic?

Can anyone help me to create a points without long/lat in mapbasic if i have a table with variable integer. I will have popupmenu for this table and everytime i select one it will create a points ...
0
votes
0answers
38 views

ogr2ogr converting ESRI shape to Mapinfo interchange

I'm trying to convert .shp files to .mif files on Ubuntu Linux using ogr2ogr: "ogr2ogr -f "MapInfo file" -dsco FORMAT=MIF mprec.mif mprec.shp" I don't get any errors but when I open the resulting ...
3
votes
1answer
329 views

Recommendations for creating contour map from depth points

I am trying to put together a safe routes map for a local lake. I have an old paper map that has a grid of various depths as points. I would like to draw contour lines through these points and create ...
0
votes
0answers
13 views

mapinfo and java tools

I am hoping to develop a mobile application under android or my database is a card(map) produces by mapinfo professional version8.0 My questions are: To read this card(map) (the file containing ...
1
vote
1answer
161 views

Handler tool in MapBasic

Have any handler or procedure, that call automatic when the click or unclick menu item or button? Similiar SelChangedHandler.
3
votes
1answer
542 views

Symbology for Open Street Map [OSM] Data in MapInfo [tab] format

I have shapefiles for the different SOM layers which I have translated into TABs but I am now trying to symbolise them in a similar style to OSM online. Is there a way to easily apply the OSM ...
0
votes
1answer
34 views

Mapbasic - Create a Table array based on a variable

I wanted to create a temporary table as per my variable. If i have a value of 10, it will create a table with 10 rows. How should i start my code in MapBasic?
1
vote
0answers
20 views

How to import vietnamese characters with MapInfo Pro?

How can I import shape files, Charset "UTF-8" with vietnamese characters (f.e. "Đường nhựa") correctly? With UTF-8 I get somethin like "___ng nh_a"! Should I use another charset or is it just not ...
2
votes
0answers
77 views

Large Rasters in ArcGIS & MapInfo

My geoscientists like to work with MapInfo and ArcGIS. I require a common 1 band raster format that can hold obscene amounts of data without damaging the data (compression). I have tried .tif and ...
3
votes
3answers
935 views

Can MapInfo Professional use data direct from a File Geodatabase?

Esri released its File Geodatabase API in mid 2011, and it seems that QGIS via GDAL's OGR FileGDB Driver added support for the File Geodatabase within about a year. By support, I mean simply being ...
0
votes
0answers
15 views

Opening Esri fGDB Feature Class in MapInfo Professional 11.0.3 [duplicate]

I would like to open ArcGIS file Geodatabase feature class and other such fGDB objects with MapInfo Professional. NB: converting to Shapefiles or personal mdb is not an acceptable solution. I need it ...
1
vote
1answer
82 views

How can I geocode CSV by postcode, using existing point data, in QGIS?

I have a very simple MapInfo workflow for geocoding a CSV file which contains UK postcodes, based on an SQL select query referring to point data for postcodes. This is simple. Using Mapinfo open the ...
0
votes
0answers
28 views

How do you reference a .TAB file linked to a spatial database within your workspace?

I have created a spatial database in SQL Server. I then created a MapInfo .TAB file that links directly to that spatial database table and I can view it inside MapInfo Professional without any issue. ...
2
votes
2answers
102 views

Does mapbasic support function overloading?

I am creating application with mapbasic. Now that it's been some time with mapbasic I found that the language is very fundamental and does not support functionality that I took for granted in Java or ...
1
vote
0answers
48 views

Does QGIS have a dynamic spatial join select tool, equivalent to MapInfo Boundary Select?

I´m a MapInfo user, I´ve gone over to QGIS and it´s got a lot going for it, except for some simple features from MapInfo I just can´t do without. One such is MapInfo Boundary Select, which is a basic ...
1
vote
1answer
48 views

How can I create individual directional point symbols in MapInfo?

I have a point tab file where one of the attributes is a 0-360 direction. I want to create an arrow symbol for each point with the arrow pointing in the direction listed for that point in the table. ...
1
vote
1answer
118 views

MapInfo / Mapbasic: simple compile of table from six source tables

I have a project which I am reviving after a gap of some years. It involves several hundred runs within MapInfo, scripted in MapBasic. I am stuck at a point that is so simple, it's driving me nuts. ...
1
vote
0answers
32 views

ESRI/Mapinfo MGA56 prj vs QGIS MGA56 prj

I am trying to understand why the degree unit is different between ESRI/Mapinfo and QGIS: ESRI/Mapinfo ...
-1
votes
1answer
47 views

Same Sector Created in Mapinfo Help

The PRACH data is saved into a tab and then moved into another tab file "ToUpdate" Select * from PRACH_data where Obj into ToUpdate Fetch First From ToUpdate Do While Not EOT(ToUpdate) circ = ...
1
vote
0answers
34 views

Shapefile data not displaying on MapInfo workspace?

I have a number of shapefiles created from ARCMap and would like it displayed in MapInfo (version 10.5) but the polygon is not displayed on the work space. I can view my attributes table by browse ...
0
votes
1answer
38 views

Moving buildings in water layer into Buildings layer using MapInfo?

I am using MapInfo. I mistakenly vectorised some building on my water layer, is there any way I can fix this by moving the buildings in the water layer into the Buildings layer? It was so tedious ...
0
votes
1answer
60 views

Draw lines from points to points not by lon/lat in mapbasic

How to draw lines from points to points not by lon/lat What I need is a cross connection with cable like the image below: I have N input and M output points Any idea will be appreciated highly.
0
votes
3answers
33 views

Snap/Trace to layer in MapInfo without it being selectable?

Is it possible to snap/trace a layer in MapInfo without it being selectable? I am preparing workspaces for a survey and I don't want the surveyors being able to select the background mapping (they're ...
0
votes
1answer
28 views

MapBasic tool not compiling due to undefined variable

I am attempting to compile a quick MapBasic tool I have written, however it won't compile despite the variable being clearly defined It's probably something simple I am missing, can somebody point ...
0
votes
0answers
37 views

MapInfo - how to *publish* a WFS service?

I seem to have my Pitney & Bowes technologies in a scramble. We installed the demo version of MapInfo hoping to build a map and publish it as a WFS service. We built the map but found no publish ...
0
votes
1answer
67 views

Difference between a region and a polygon (mapinfo pro 12)

I am new to using MapInfo and have recently noticed the convert to regions and convert to polygon (edit: convert to polyline) function. What is the difference between a region and a polygon? Also, ...
2
votes
1answer
186 views

Saving a ArcMap layers RGB values into the attribute table

I am wanting to take a symbolized layer in an mxd, and save it's symbol color (like a polygon fill) into its attribute table as an RGB value. My goal is to use this value in MapInfo to symbolize it's ...
2
votes
1answer
91 views

How do I save topology errors in QGIS?

I'm currently doing a project on finding blocked roads in a road network layer. I've figured that I can use the topology checker with the rule 'must not have dangles' and find them this way. But I ...
3
votes
1answer
247 views

How to buffer a point by cardinal distances to create a polygon?

I am trying to buffer a point by distances in a table to create a polygon or line for example For a point with known x,y buffer based on the following radius: North= 20m East= 21.5m South= 14m West= ...
0
votes
1answer
100 views

Opening MPK file with other than ArcGIS?

Is there anyway to open a .mpk file with MapInfo? Or do just need to buy a second GIS program (ArcMap)?
4
votes
3answers
274 views

Alternatives to Business Analyst, AnySite/MapInfo, and Sites To Do Business?

This is a very general question and I hope it is ok. I've been "Googling" and can't find much. I work at a shop that currently uses MapInfo + AnySite to do real estate site analysis. I generate ...
0
votes
0answers
38 views

PRACH data plotted in a better way but not completely

I am close to finishing the visualization of PRACH in mapinfo. Here's my output so far (for 4 counters) Unfortunately, for some sectors it is not working as it should be. Can you please help out? ...
0
votes
1answer
144 views

Import GeoTIFF into MapInfo - why “control points”, and how to batch-create TAB files?

OK, so I am largely hostile to commercial software with 'proprietary' formats, but a colleague only knows MapInfo. I have a bunch of GeoTIFFs (produced by gdal-merge of JPG/JGW-filepair hi-res aerial ...
0
votes
0answers
31 views

PRACH data mapped right but arcs not on top properly

PRACH data is mapped right. However, how would it be possible to draw the arcs on top of each other for all the 21 PRACH counters? Here's a snapshot of the code: Fetch First From ToUpdate Do While ...
3
votes
4answers
6k views

How to calculate for every basin/sub-basin, drainage area at every elevation contour along stream?

With DEM as source, I created all necessary files like flow direction, accumulation,slope,streams,watersheds,pour point etc.... In my watershed(basin), I have many sub-watersheds(sub-basin) with ...
1
vote
1answer
45 views

Geotiffs not displaying colour correctly in MapInfo

I'm trying to open geotiffs I made in ArcGIS 10.2 in MapInfo 12.5. They open in MapInfo in the right location but displayed on a blue colour scale. These should be colourful RGB images. Trying to ...
0
votes
1answer
59 views

Create Sector PRACH in Mapinfo

I am trying to write a code that creates the PRACH per sector per band for a site. My PRACH data contains: "Site name, lat, long, beamwidth, azimuth, and distance" I got to the point of creating ...
0
votes
1answer
60 views

How to create a layered PDF document using MapInfo version 12.5

I am wanting to create an interactive PDF layer using a MapInfo workspace where by layers can be turned on and off in the pdf. I also have a large aerial image I would like included in the pdf . Any ...
1
vote
2answers
308 views

Mapinfo 12.5.1 (64 bit) failing to call *.xlsx workbooks

My company have upgraded to to Mapinfo 12.5.1 (64-bit) this week. It fails to open tables that call *.xlsx files. Those that call *.xls files have no problem. The error for *.xlsx files is as follows: ...