North American Datum of 1983, a geocentric datum and geographic coordinate system based on the 1980 Geodetic Reference System ellipsoid (GRS80).

learn more… | top users | synonyms

1
vote
0answers
105 views

Convert PLSS (Section, Township, Range, Meridian) to Latitude and Longitude using R package or Python

I have data in the form of Section, Township, Range and meridian. I have 300,000 data points from all over the USA. Is there any way i can write R or python scripts to batch convert all the points to ...
6
votes
2answers
155 views

Is a Helmert transform necessary to convert between WGS84 and NAD83?

I've read things all over the internet which claim that NAD83 and WGS84 are effectively equivalent (with minor ellipsoid differences). However, if I do geodetic (WGS84) -> ECEF -> geodetic (NAD83) ...
3
votes
1answer
128 views

Difference between datum and ellipsoid for geodetic coordinates?

Looking at the Wikipedia page for the North American Datum, it seems to imply that the datum is completely defined by the ellipsoid, which defines the major/semi-major axes, flattening, etc. For ...
1
vote
1answer
116 views

Do I need to reproject a NAD83 raster (with no projection) before using it with a shapefile that has a specific NAD83 projection?

I am relatively new to using ArcMap, so I apologize for what I guess is a relatively easy question. I working with a gridded PRISM precipitation raster (www.prism.oregonstate.edu), which has a ...
0
votes
1answer
26 views

Project to NAD83 (epsg:26912) with projectRaster - gives epsg:2152

I am working with some Landsat 8 images from the U.S. Geological Survey (USGS) Earth Resources Observation and Science (EROS) Center. I am processing the images in R, and after masking the clouds, I ...
3
votes
1answer
130 views

Is re-projection needed from SRID 4326 (WGS 84) to 4269 (NAD 83)SRID

I have US census data against state boundaries stored as SRID 4269, in an MSSQL DB. The input data used for calculations against that dataset is stored as SRID 4326. As far as I can infer from the ...
4
votes
2answers
967 views

Geographic Transformations in Alaska Between NAD83 and WGS84

I have done a ton of research on the most accurate transformation to use in mainland Alaska to convert between the NAD83 and WGS84 datums, but I just can't seem to find a definitive answer. ArcMap ...
2
votes
1answer
97 views

Which Custom Geographic Transformation Method to use for Nad83 to Nad 83 (CSRS)

I couldn't find a NTv2 file for transforming GCS NAD83 to GCS NAD83(CSRS) so I'm trying to create a custom transformation using the 'Create Custom Geographic Transformation' tool in ArcMap. The tool ...
0
votes
0answers
67 views

Geographic Coordinate System NAD 1983 vs Projected Coordinate System NAD 1983 & Projections

I am working on a project utilizing free data from http://www.pasda.psu.edu/, specifically data from PennDot, 2015 Pennsylvania County Boundaries ...
1
vote
0answers
204 views

ATS77 MTM 5 to NAD83 CSRS UTM 20N Coordinate Converter?

I've been looking for a simple way to check the accuracy of my transformation using a set of coordinates for a single point but have been unable to find an online tool or piece of desktop software ...
0
votes
0answers
82 views

Proper projection name for NAD83 2011 revision

I have two PRJ files, one from ESRI and another from some custom GDAL/OGR code I wrote (pasted below). I was trying to have both work in NAD83 UTM10N with the 2011 revision. The ESRI file has 2011 in ...
1
vote
0answers
28 views

How to best import a US Map Schematic?

I would like to use the following wiki US Map schematic as a background to my map work. (http://en.wikipedia.org/wiki/File:Blank_US_Map.svg) It is a .svg file, and GeoReferencer is unable to import ...
2
votes
2answers
2k views

Converting between wgs84 and nad83

This is a newbie question that is about converting between wgs84 and nad83. I have aerial photos that I am trying to compute lat long coordinates for as closely as possible. There are several factors ...
0
votes
1answer
613 views

Proper transformation file to go from NAD83 CSRS UTM 17 to NAD83 UTM 17

Looking to determine which transformation file to select when using the Project tool in ArcMap 10.2.2 to go from NAD83 CSRS UTM 17 and NAD 83 UTM 17. The data I am working with is from Geogratis and ...
2
votes
1answer
256 views

Convert 2D coordinates from NAD83 to WGS84 using Postgis

I have a set of NAD83 coordinates that I need to convert to WGS84 coordinates. I am using postgis on an RDS. Specs for the box I am using from postgis_full_version(): POSTGIS="2.1.3 r12547" ...
0
votes
0answers
38 views

Projecting NAD83 on-the-fly to WGS84 [duplicate]

I have a point feature class in a geodatabase that uses WGS84 as its SRS. A colleage of mine created points in this feature class using an external database containing lat and long values. However, ...
1
vote
0answers
86 views

Export DXF Issue in QGIS?

I got the shapefiles in QGIS and transformed them to UTM NAD83 from WGS84, then tried to create a DXF of it so I could use it as an overlay in fieldgenius software for a topographic survey we're ...
0
votes
0answers
70 views

WGS 84 - NAD 83 with a twist

I have a dataset of GPS field point collected received in WGS 84 but displayed in NAD 83 UTM. I used a field point to inform a total station for a reference starting point, so all my total station ...
0
votes
1answer
82 views

ArcGIS 10.2.2 Does “Batch Project” work for different input datum?

I have two vector data sets - one is in NAD27 and the other is in WGS84. Normally I reproject one at a time. But can I just use 'batch project' to reproject both of them to NAD83 at once? I was not ...
0
votes
1answer
55 views

Converting datum?

I need to measure the distance (with the ruler) of points from two different layers. However, one layer is NAD83 and the other is NAD27. I also have a standard ESRI basemap downloaded. The issue I ...
2
votes
2answers
1k views

ArcGIS Desktop:Transformations: Geographic vs Projected?

Arc10. I have two data sets (both CSV files w/ lat and long columns) and I am working on standardizing them to the same projection. File1: NAD27; File2: NAD27, WGS84, and NAD83. I would like all of ...
1
vote
1answer
167 views

NAD27 to NAD83, saving AFTER transformation?

I need to measure the distance (with the ruler) of points from two different layers. One layer is NAD83 and the other is NAD27. When importing the NAD27 csv file, I specified it was NAD27. Then I ...
3
votes
1answer
120 views

Plotting NAD83 zone 8 points atop OSM or Fusion Tables

A geologist has given me a bunch of points to plot on a map I'm doing in WGS84. Her points are in NAD83, and she says they're in "zone 8." Here is one of the points. 440244 7599457 She says the ...
2
votes
1answer
326 views

Shifting a CAD file from ATS77 MTM 5 to NAD83 CSRS UTM 20

Looking to make the coordinate system shift in ArcMAP (for Nova Scotia) between ATS77 MTM 5 and NAD83 CSRS...NTv2 file?
0
votes
1answer
188 views

Aligning two layers captured in different coordinate systems

I have two layers, one of points (locations of fruit trees) and one of Atlanta zip codes, in an ArcMap, but the layers are not aligning. The zip codes are in the top right and the fruit points are ...
2
votes
1answer
156 views

Aligning layers with questionable metadata in SW Ontario

After making my best efforts to read/try everything I can on this forum and elsewhere, I unfortunately have to contribute to the wide literature of "my layers aren't aligning" questions. I am working ...
1
vote
0answers
346 views

Incorrect coordinates when reprojecting NAD27 to NAD83

I have some historic UTM coordinates as NAD27 (556787, 7169250) which I entered into a spreadsheet and have imported into QGIS. I assign them the projection Nad27 / UTM zone 12N (EPSG: 26712) I ...
1
vote
1answer
541 views

PostGIS is rejecting an srid code for my projection. I've found a nearly identical projection w/ a legit srid. Will it work?

My projection is this: NAD 1983 StatePlane North Carolina FIPS 3200 Feet, which has a proj4 string that looks like this: +proj=lcc +lat_1=34.33333333333334 +lat_2=36.16666666666666 +lat_0=33.75 ...
1
vote
1answer
3k views

How to Project shapefile from NAD 1983 UTM Zone 12 to WGS 1984 UTM Zone 13N?

I have a question and I have a shapefile that is in NAD UTM Zone 12 and Datum is North American Datum of 1983. What I would liket to reprojection it to NAD 1983 UTM Zone 13N and change the Datum to ...
0
votes
1answer
2k views

Transform Shapefile from WGS84 to NAD83 using QGIS? [duplicate]

Possible Duplicate: How to reproject a vector layer in QGIS? I have some shapefiles whose CRS is WGS 1984 and I have some shapefiles whose CRS is NAD 1983 State Plane Illinois East. I want ...