An extension to ArcGIS for Desktop and Server which adds functionality for analyzing networked data, particularly for road and transport networks.

learn more… | top users | synonyms

3
votes
1answer
74 views

Why isn't the service layer shape properly spread out?

I created a simple service layer polygon in network analyst (ArcGIS Desktop 10.2) with no hierarchies set in the street network. Now I don't understand why is this polygon created along some ...
4
votes
1answer
95 views

Counting traversed arcs on routes to write attributes using ArcGIS for Desktop?

I have number of persons located on a road network and I have calculated their shortest distance to a particular location. From the routes output created from Closest Facility can I break the ...
1
vote
1answer
326 views

Check/Uncheck Trim Polygon option in Network Analyst

Can anyone tell me when to check/uncheck Trim Polygon option in Service Area Layer Properties dialog box while doing Network Analyst problems? By default Trim Polygon values comes as 100 m. Shall we ...
20
votes
7answers
2k views

Alternatives to Network Analyst

I'm not sure how reasonable this question even is, but it leaves me no less curious after a bit of searching. If I am looking to build a network based on road features and attributes, is Network ...
1
vote
1answer
148 views

Add time restriction in ArcGIS Network Analyst

I'm trying to use train tracks as a network in ArcGIS Network Analyst. We are trying to create a model for security agents on board our trains and we'd like to optimize their daily "route". For now, ...
0
votes
1answer
178 views

Network Analyst does not analyses my own created roundabouts in geofabrik shp file

I am trying to digitized the shape file data (attached) that i downloaded from geofabrik, to new roads in my region. The network anaylst does not work beyond rounds abouts, that I create new ones. It ...
5
votes
1answer
647 views

Solving a route in a multimodal network dataset does not use all forms of transport available

After having completed Exercise 2 in the official Esri Network Analyst Tutorial, I decided to find a route in the multimodal dataset, to see how it functions. After adding several network locations ...
4
votes
2answers
715 views

Including polygons as part of network for ArcGIS Network Analyst?

I am creating a pedestrian walking network of a downtown area. I am digitizing line segments for paths and sidewalks, but I need to incorporate parking lots into my analysis. So far, I have been ...
2
votes
1answer
342 views

Cost Attributes- Network analyst for Arc GIS 10.2

Hi can anyone tell me whether Network analyst can consider multiple cost attributes? I am looking for most ecologic route(not shortest), therefore I have assigned a value of pollution to each road ...
1
vote
1answer
89 views

Network Analyst Question - summing multiple routes

I have been working with Network Analyst to try and solve the following problem, but the only solution I have found is tedious for more than about 4-5 origins and destinations. I have a set of about ...
1
vote
2answers
83 views

Network Analyst resolved route can't display properly on printed map [duplicate]

I have looked on the Internet but there are no updated answers. I am using ArcMap 10.2. I am trying to print the route resolved by network analyst but there is no way I can display overlapped ...
1
vote
1answer
1k views

How to generate all possible routes between two points?

I have a network dataset in ArcGIS and I need to generate all possible (not only the shortest one) routes between two given points (A, B). Is it possible to do it with the Network Analyst? Or with ...
0
votes
1answer
80 views

creating shortest route using line segment layer as network locations

Using Arc10.2.1, trying to create a truck route that begins at one location on a county street grid and ends up in the same place, obeying a feature class of guard rail line segments throughout an ...
8
votes
2answers
1k views

How to restrict portions of road network from the analysis in ArcGIS 10 Network Analyst?

I'm trying to sort out network analysis in ArcGIS 10. Toy example of finding shortest distance between two points looks something like that : Where squares are two locations, and the green line is ...
13
votes
0answers
624 views

Incorporating Length of Route Value into Cost Evaluator Function (ArcGIS Network Analyst)? [closed]

A friend and I (who more frequently than I posts on this board) are creating a walking network and we have run in to a snag. We would like to attribute a cost evaluator to our network dataset using a ...
5
votes
2answers
723 views

ArcGIS 10 Network Analyst Service Area Problem/Peculiarity with Solving

I am having a problem when solving some of my service areas. I am loading the locations from a point feature class, and they are all located. The majority of them return a service area that is ...
4
votes
1answer
1k views

Network Analyst: arcpy's 'Solve' running out of memory

I've run OD cost matrix analysis using GUI tools n ArcGIS 10. My goal is relatively simple - find closest 50 neighbors for each origin point. The dataset I'm working with is relatively large: ...
4
votes
1answer
2k views

How to find network distances between two sets of origins and destinations?

I'm learning how to use Network Analyst, and I'm not entirely sure what to do (or search for). My objective is to measure the nearest distance from the red circles to the blue circles along a road ...
11
votes
6answers
4k views

How to Split Roads at intersection for Network Analysis?

I have a file geodatabase Feature Class representing the roads of a city. The Roads are not split at Intersections. ArcGIS needs roads to be split at the intersections, otherwise it assumes that the ...
3
votes
1answer
104 views

Finding the shortest network distance from A to C via the closest B in ArcGIS?

I have an intern wanting to model the network distance from origin (A) to destination (C) via the closest detour (B). There are approximately 1,000 origin, 200 destination, and 500 detour points. I ...
2
votes
1answer
43 views

Is there a way to minimize turns in Network analyst routing?

I have a network of pedestrian routes and I want to provide them with clean directions but network analyst chooses the first route that it can turn towards destination and gives me a zig-zag road. Is ...
2
votes
0answers
46 views

Why are steps out of order when running model in Batch? [duplicate]

I have an issue using an ArcMap model in batch mode. The purpose of my model is to obtain the result of an OD cost matrix from a selected network and a set of origins and destinations. My goal is to ...
2
votes
1answer
607 views

Creating transfer edges in a multimodal network dataset

I have three feature classes: Bus Stops, Routes and Streets. The points are not coincident on vertices of either of the line feature classes - they are located next to the routes (red line): The ...
1
vote
1answer
826 views

How to format street network data for network analysis?

How do I create a good street network for network analysis? How should I format the street data to import it into Network Analyst, including prefixes, directions, intersections, and geocoding ...
4
votes
0answers
133 views

Has anyone used ArcGIS for 'automatically' detecting lineaments from a high-resolution (1m) DEM?

I have a set of DEM's produced from LIDAR data. I am wondering if anyone is familiar with or knew of any published research papers which looked at (semi-)automatically detecting lineaments /or ...
3
votes
0answers
73 views

How to calculate wait time on a one-lane road with two-way travel?

I want to know how to calculate the wait time on a single-track/one-lane road (only room for one car at a time) for one car waiting for another car to pass by. For example, two cars drive on the ...
3
votes
2answers
496 views

How are service areas created in ArcGIS Network Analyst?

I want to create a service area map of Burma in order to spot the areas that are within xx kilometers from a set of cities. The problem is that the generated polygons aren't exactly what I expected. ...
3
votes
1answer
261 views

Create an optimized point layer derived from a road layer so that the driving distance between each point is x

Consider a classic state-wide or country-wide roadway network. I want to create a point layer, where each point is on the roadway network. This point layer will have each point separated by its ...
2
votes
1answer
65 views

Script to export OD matrix line tables for individual point features

I have a network dataset and I would like to know the network distance (not Euclidean) from each feature point in a shapefile to each other point in another shapefile with the same number of points. ...
2
votes
0answers
71 views

Modelbuilder - make service area layer

I made a model in the model builder (ArcGis) to make a service area layer (see figure). Now I want to run this tool for the same locations but for different hours. -> the results would be a feature ...
2
votes
1answer
81 views

Shrinked Travel Time Contour

I'm relatively new to service area analysis. I use ArcMap 10.2 I made the following travel time contour maps by performing service area analysis.I made the first one first. It looks good. Then I add ...
2
votes
2answers
182 views

How to calculate F_NODE and T_NODE fields in a street shapefile

I have developed a Streets shapefile from papermaps and using GoogleEarth. Can someone tell me a very simple method to bring values in F_NODE and T_NODE fields in my attribute table, so that I can ...
1
vote
0answers
178 views

Creating multiple routes at same time with different stop locations using ArcGIS Network Analyst?

I have a feature class that contains about 500 cross-streets locations and another feature class that contains about 1800 locations. I need to create a route from each cross-street to 1-6 locations. ...
1
vote
1answer
44 views

Is it possible to make stops not in a certain sequence in order to find the shortest route with the network analyst?

Is it possible to make stops not in a certain sequence in order to find the shortest route with the network analyst? I now use the small green points as an input stops because I want the lines with a ...
1
vote
0answers
39 views

how to use line feature as stops input in network analyst?

I'm trying to build a certain route with network analyst on a Network Dataset. As an input to create the route I want to use line features. I am trying to do this with network analyst in ArcGIS 10.0 ...
1
vote
0answers
38 views

Modelling two-way single-track/one-lane width road in ArcGIS Network Analyst?

I don't know how make one-lane roads(only room for one car at a time) for one car waiting for another car to pass by in ArcGIS. Yesterday, I asked about the wait time when the two cars meet in the ...
1
vote
1answer
393 views

Network Analyst: Location Allocation for Model Builder

I am trying to create a model to answer a question using a network analysis. Background: 10 possible fire station locations (shapefile) Calls for demand points (shapefile) Impedance is 5 minutes ...
1
vote
1answer
129 views

Why sometimes Network Analyst can not find the shortest or the best route?

Normally in Network analyst and route detection it has to find the shortest and efficient way.But here in my work I can see that it does not find the best choice.I wonder why it chose the longer path ...
1
vote
1answer
93 views

Why some lines do not have Junctions in Network Analyst?

I digitized lineaments of an area from 2 different hillshade degree(315 and 45 degree). I joined two of them in one layer. After I made network from digitized lines,some lines do not have ...
1
vote
0answers
290 views

how to combine GPS track logs using modelbuilder?

I'm creating a model to import GPS tracks(.GPX files) into ArcMap, this is to create a network of driveable off road vehicle routes. I've manage to do some of the things I'm trying to do, but there ...
1
vote
0answers
102 views

Network Analyst: How to sum cost attributes without length with closest facility tool

I am working on Safe Routes to School, and have created a network dataset. Each segment of the newtork has a 'walk_score' assinged (0,1,3,5,10), based upon street classification and sidwalk ...
1
vote
1answer
436 views

Creating an Origin/Destination (OD) cost matrix using ArcPy

I have created a python script that runs an OD cost matrix over five years from 1999 to 2004. I have set up an OD cost matrix for each year, which I think is very cumbersome. Is there someone who can ...
1
vote
0answers
101 views

How to indicate a change in transport mode for directions in a multimodal dataset

When I solve a route and generate directions for my multimodal dataset, the end product is not very user friendly: The pedestrian started walking along Main Street and then boarded a bus to travel ...
1
vote
1answer
615 views

No route from location … to location … Error: No solution found by Network Analyst?

Why does this warning box appear when I click the Solve button in Network Analyst toolbar? No route from location "Graphic Pick 46" to location "Graphic Pick 61". Error: No solution found.
0
votes
1answer
53 views

OD cost matrix network analyst

I would like to know if it's possible for my OD cost matrix to know which segments are been used to get to the destination. In other words I would like to know which network segments have been used ...
0
votes
0answers
29 views

INetworkBuild throwing exception of file read/write error?

I Have a code that executes well in winxp but recently i am working in win7 the earlier code runs well in win7 also but only the build network is throwing me an exception of file read /write error can ...
0
votes
1answer
161 views

Using network analyst new closest facility to calculate certain routes but not others?

I'm working on calculating a variety of distances between many points using network analyst using ArcGIS 10.2. Using the new closest facility option, I have 100,000 facilities and 100,000 incidents, ...
0
votes
0answers
18 views

Add junction to a line which has not intersect with other lines [duplicate]

In the process of making network analyst , some lines do not have junctions since they do not intersect with others. Is this possible to give a line junction ( something like adding vertices in ...
0
votes
1answer
528 views

Making bus routes in ArcGIS Network Analyst?

I am a novice. Aim is to make bus routes in ArcGIS Network Analyst, so specifying two points on the map, I could see what buses to ride with minimal layovers and time. Please tell me where it is ...