An extension to ArcGIS for Desktop and Server which adds functionality for analyzing networked data, particularly for road and transport networks.

learn more… | top users | synonyms

5
votes
0answers
636 views

How to use Route Task in Network analysis tools

I am using esri network analysis tool and I just want to draw the path between two clicked point on the map (by using route task) I use the example code block in the following link ...
4
votes
0answers
51 views

Has anyone used ArcGIS for 'automatically' detecting lineaments from a high-resolution (1m) DEM?

I have a set of DEM's produced from LIDAR data. I am wondering if anyone is familiar with or knew of any published research papers which looked at (semi-)automatically detecting lineaments /or ...
3
votes
0answers
54 views

Understanding Error network dataset has no edge elements It may be unbuilt?

I'm trying to alter an Integrated Transport Network (ITN) to remove all of the roads that are within a flood zone (a separate shapefile). The ITN Network Dataset I'm working with was created by ...
3
votes
0answers
28 views

Using Traffic with Network Analyst VRP

To the best of my understanding, setting a specific day under Analysis Settings for the VRP uses the Routing_ND historic traffic information. Is there some step I'm missing to enable traffic? I've ...
3
votes
0answers
40 views

How to use real time data (traffic) for network analyst in ArcGIS?

I have a problem with using traffic data for routing. I'll describe the scenario: There is a local traffic service (real time) that has the speed of each segment in the network. This information is ...
3
votes
0answers
61 views

How to calculate wait time on a one-lane road with two-way travel?

I want to know how to calculate the wait time on a single-track/one-lane road (only room for one car at a time) for one car waiting for another car to pass by. For example, two cars drive on the ...
3
votes
0answers
74 views

ArcGIS 10.0 Network Analyst Creating Service Areas Beyond My Network

I am experiencing weird off shoots which are beyond my network when creating service areas using Network Analyst. The red circle in the picture below shows an example. I am currently using ArcGIS ...
3
votes
0answers
168 views

Determine 3 and 6 minute fire response times

I'm expecting to get an Excel file with data on previous fire and emergency response times. I was told it will have incident addresses and the response time for each incident (~ 12K incidents). I also ...
3
votes
0answers
240 views

A problem with ArcGIS network analyst making paths and roads work together

Working in Arc GIS 10 .0 service pack 5, network analyst extension, Productivity Suite 2.1 service pack 7, on Windows 7. I am trying to get the Ordnance survey ITN urban paths layer to work with OS ...
3
votes
0answers
640 views

Performing a Multicriteria Analysis Using Distance Along a Road Network

There is the possibility that I will be working on a project which will look at thousands of properties in a region and measure their accessibility to different services (schools, parks, hospitals, ...
2
votes
0answers
17 views

How does ArcGIS calculate Live Traffic in a network dataset?

I create a network analyst service in ArcGIS 10.2 with live traffic. The traffic is classified into four classes (stop and go, slow, moderate and free flow). I know that when the service uses ...
2
votes
0answers
40 views

ArcGIS network file size

I have a large (several hundred thousands vectors, 800-900) from which I am trying to create a network (road) and am unable . Don't sure if its an issue with ArcGIS or limitations with my computer. ...
2
votes
0answers
65 views

How to extract polygons from a road network?

I need to extract faces (or polygons) from my road network and calculate their areas. I mainly use Arcpy packages but even if you know it in QGIS APIs, I'd appreciate if you'd share it with me. If it ...
2
votes
0answers
46 views

Network Analyst provides different values for Total length and Shape length

I'm using the Network Analyst extension in ArcMap 10.2 to calculate the shortest routes between ~50000 pairs of stops. As the impedance is set to "Length (Meters)" the resulting Routes Featureclass ...
2
votes
0answers
64 views

Identify different networks inside a line shapefile

I'm dealing with a quite big line shapefile containing road tracks. The roads are connected to each other, creating distinct networks. These networks are independent and they are not connected to each ...
2
votes
0answers
24 views

Progressor bar for network analyst solve?

I'm using ArcGIS 10.2 and arcpy and am wondering if anyone has a method for displaying an accurate step progressor bar during a network analyst solve? As far as I know its not possible to set the ...
2
votes
0answers
69 views

Can Network Analyst consider multiple cost attributes?

I'm trying to do a basic service area network analysis in ArcGIS 10.0. But I have two cost attributes I want to act as the network impedance-- one apportioned along the edges of each line feature, ...
2
votes
0answers
105 views

Network Analyst - OD Cost Matrix snapping distance

I am using the ArcGIS Network Analysis - OD Cost Matrix layer tool and I was wondering if anyone knew of a way to incorporate the snapping distance of the origin and destination to my total distance ...
2
votes
0answers
160 views

ArcGIS 10.1 - OD Cost Matrix SOAP Request (Error received)

I've been using Network Analyst in ArcGIS desktop (10.1), and using succesfully some SOAP API operations (findAddressCandidates, GetNALAyerNames, GetSolverParameters, GetSolverParameters2) But now ...
2
votes
0answers
68 views

Network Analyst: editing the “Name” field in the route sublayer

I am solving routes for origin-destination pairs (1 start, 1 end) using the tool "Make Route Layer" then adding locations to the Stops sublayer. I establish the identity of each route by a unique ID ...
2
votes
0answers
39 views

How to run more than 10 routes at the same time in Network Analyst?

My team and I are trying to run food collection routes for a food bank in Mexico City but we can run more than 10 routes at a time. In order to run the eleventh we need to take one out. Does someone ...
2
votes
0answers
72 views

Problem entering stops in a published multimodal network service

I have created a multimodal network that works fine in Desktop, but my question is more related to publishing a multimodal network dataset as a network service. I have looked for an example of this, ...
2
votes
0answers
187 views

Altering ArcGIS RoadClass Driving Directions for Walking Network (Network Analyst)

I'm using ArcGIS 10 Network Analyst Extension to try and incorporate their driving directions functionality into a walking network. I am wondering if there is any way to alter the RoadClass Values to ...
2
votes
0answers
132 views

How can I iterate a model that solves multiple routes with multiple locations?

I have multiple line feature classes that I would like to make routes and solve. For each of these routes I have specific start/stop points (feature classes) that will act as locations. How could I ...
2
votes
0answers
454 views

Network Analysis: Solve Route - No Solution

I'm using ArcGIS 9.3.1 In my network there are isolated network(not connected to main network) and restricted(non-traversable network element position) When I plot 1 point close to a isolated or ...
1
vote
0answers
28 views

Creating model that simulates water flowing down crack, then splitting at 'Y' joint?

Maybe this is a simple problem, but I've been given a task of simulating how water flows in one line, along a crack, and then hits a 'Y' junction, where half the water flows in each of the split ...
1
vote
0answers
55 views

Implementing Vehicle Routing Problem in ModelBuilder?

I am trying to solve the "Vehicle Routing Problem", using ModelBuilder. For example, using Exercise 7: Servicing a set of orders with a fleet of vehicles from the Network Analyst Tutorial: add a ...
1
vote
0answers
26 views

Modelling two-way single-track/one-lane width road in ArcGIS Network Analyst?

I don't know how make one-lane roads(only room for one car at a time) for one car waiting for another car to pass by in ArcGIS. Yesterday, I asked about the wait time when the two cars meet in the ...
1
vote
0answers
34 views

Add closest facility as an attribute to a point in ArcMap?

Is there a way, after performing a closest facility analysis, to add/save the closest facility number/name/unique ID to the incident? I plan to then use this attribute to create a route going from ...
1
vote
0answers
25 views

Creating random location within a network from a given location and a given distance

For a habitat selection study, I am trying to identify availability. My species lives along waterbodies and I could assess distances moved between two consecutive locations using the network analyst ...
1
vote
0answers
59 views

Problem with service area gap with Network Analyst

I am working on running Network Analyst to create a Service Area from a single location to all around it. Esri's network dataset was missing a couple crucial street lines, and so I uploading their ...
1
vote
0answers
47 views

Need advice on creating polyline templates (polyline vs polyline ZM) for future network dataset

I am about to request large amounts of polylines from a variety of sources (municipalities). The idea is to collect bike path data and build a regional bike network (I work for the region ...
1
vote
0answers
201 views

how to combine GPS track logs using modelbuilder?

I'm creating a model to import GPS tracks(.GPX files) into ArcMap, this is to create a network of driveable off road vehicle routes. I've manage to do some of the things I'm trying to do, but there ...
1
vote
0answers
45 views

Can someone explain me how to do the layout of routes in ArcMap?

Can someone explain me how to do the layout of routes in ArcMap? I have a shape of points with garbage containers and want to do the route of each truck but don't know how. I've tried with the network ...
1
vote
0answers
25 views

Is there any help file to understand resource.xml of network Analyst?

I want to translate the direction result of network analyst to turkish. I surf in the interent and found i have to change resource.xml file . the file located in arcgis install directory ...
1
vote
0answers
66 views

Network Analyst in ArcGIS: Multiple vehicles, multiple trips, finite vehicles in a vehicle routing problem

I am working on a problem where I have 30 vehicles who can all make at most 6 stops in a day. They have to service more than 500 shops. I can get Network Analyst to do a Vehicle Routing Problem ...
1
vote
0answers
43 views

Network geoprocessing in ArcGIS

I need a hand with how to approach this problem and hope you can offer some pointers. I have an ArcGIS Geometric Network object representing streams. I have a separate point layer representing stream ...
1
vote
0answers
34 views

Time attribute problems with Network Analyst

My network dataset is in a geographic coordinate system, and when I project into UTM to calculate Miles for a length field to use with my Speed Limits to create a time attribute it does not seem to ...
1
vote
0answers
74 views

How to find shortest route for cyclist that can switch between road layer and cycle path anywhere they intersect?

I have two data layers that I want to use in a network analysis for the shortest route analysis for a cyclist: road network cycle paths I want to find a shortest route for a cyclist that can ...
1
vote
0answers
71 views

Network Analyst: How to sum cost attributes without length with closest facility tool

I am working on Safe Routes to School, and have created a network dataset. Each segment of the newtork has a 'walk_score' assinged (0,1,3,5,10), based upon street classification and sidwalk ...
1
vote
0answers
40 views

giving a java program access to network analyst calculations

I have a fire department simulator written in Java that simulates a year of fire department responses. There is a Java method/function that calculates time between two coordinates using a fairly ...
1
vote
0answers
46 views

Turn Table To Turn feature class

I will convert a Turn.dbf file with 'Turn Table To Turn feature class' Toolbox so I can make me one way online. But I get a warning: Edge features are not connected. Turn OID = 8 Edge features are ...
1
vote
0answers
80 views

Automated attribute update geometric network

I have a Network Dataset of a storm water system containing two feature classes of points and lines. (All data is topologically sound with pits and pipes snapped and linework captured in direction of ...
1
vote
0answers
184 views

Calculating walking routes along a network(ArcGIS)

I've created a network consisting of footpaths, dirt tracks and junctions. I would like to calculate a route using network analysis by giving ArcMap the time and walking speed that the route should ...
1
vote
0answers
560 views

trying to find areas within a certain driving distance along a road network WITHOUT a specific destination

I was hoping somebody might be able to help me out with this. I'm trying to use Arcmap 10.1 to find all the areas along a road network (a county roads layer in this case) that are a certain driving ...
1
vote
0answers
111 views

How to run a new Service Area analysis

I will run a new service area analysis with Default Breaks at 30.60 and 90 minutes. I will try to do this in a run with ModelBuilder. Does anyone please help me out here. Also wonder how I select ...
1
vote
0answers
79 views

How to indicate a change in transport mode for directions in a multimodal dataset

When I solve a route and generate directions for my multimodal dataset, the end product is not very user friendly: The pedestrian started walking along Main Street and then boarded a bus to travel ...
1
vote
0answers
288 views

Vehicle Routing Problem - Cost Calculation According to the furthest point in route

Certain logistics companies do not calculate their costs according to the total distance travelled but according to the furthest point in the route. In our problem, Vehicle Routing Problem do not ...
0
votes
0answers
11 views

Offsetting Overlapping Routes in Network Analyst

I've seen some questions tackle this issue, but havent myself found a working solution. Using ArcMap 10.2.2 Advanced with Network Analyst. I use the Vehicle Routing Problem to route a couple ...
0
votes
0answers
6 views

Network Analyst Error: The range of positions is invalid for this operation

I'm running into this error, using ArcGIS 10.2.2 Advanced with Network Analyst enabled. I'm using the route solver and inputting my stops, which already have the associated route and sequence number. ...