pgRouting extends the PostGIS / PostgreSQL geospatial database to provide geospatial routing functionality.

learn more… | top users | synonyms

1
vote
0answers
86 views

Is there any VRP solver in Pgrouting 2.0?

after looking at older posts and googling for a while i guess there is not vrp solver (multiple trucks). there was DARP in pgr1.x but i can't see it in 2.x. i found a lot of information on ...
1
vote
0answers
98 views

instal pgrouting on postgres 9.3 + postgis 2.1

Just installed postgres 9.3 + postgis 2.1 on debian 7. Postgis works fine, but installation of PGrouting fails in psql. (no errors while installing sudo apt-get install postgresql-9.3-pgrouting) ...
1
vote
1answer
122 views

Removing pseudo nodes from PostGIS database using ST_ModEdgeHeal()?

I have used osm2po (5.0.0) and its autogenerated SQL file to load some 25% of Europe.osm.pbf as a network table into my PostGIS database. I have also created an associated nodes table with select ...
1
vote
1answer
128 views

Solving “Traveling Purchaser Problem”

Till now, I was using PostGIS-pgrouting pgr_tsp function to solve Travelling Salesman Problems. This function can give us the best possible route depending upon the cost parameter when the starting, ...
1
vote
1answer
47 views

calculate route in road network [closed]

I have a shape file of road network. I have found out the nodes on the network. I want to calculate all the possible routes from a start point to the end point. I am using Postgres,postgis and ...
1
vote
0answers
50 views

pgRouting with TomTom multiNet

I would like to use TomTom multiNet data with pgRouting to create drive time/distance polygons. I have gone through the documentation regarding network topology creation, but am still confused to ...
1
vote
0answers
29 views

pgrouting query [closed]

I saw on the pgrouting workshop the following way to calculate a route: http://workshop.pgrouting.org/chapters/advanced.html SELECT seq, id1 AS node, id2 AS edge, cost FROM pgr_dijkstra(' ...
1
vote
2answers
247 views

take from multilinestring the start & end points

I have to use the A* algorithm and my geometry is in multilinestring and i want to take stratpoint(x1,y1) and endpoint(x2,y2) . I use this queries but the colums after the execute is still empty ...
1
vote
2answers
84 views

How to find a route given a set of noisy points

First of all, I'm a total noob to GIS problems. Let's say I have a set of noisy GPS points (tracked while driving) along a number of streets. Is there a way to get the most likely route that generated ...
1
vote
1answer
110 views

problem in pgRouting with data from google earth

Hello i am new in forum an in Postgesql,postgis and pgRouting. I try to make a pgrouting for my city roads. I use googlemaps to make a lines with coordinates of the roads and export the results in ...
1
vote
1answer
214 views

Calculate shortest path between each lat/lon point in one table and each lan/lon point in another in Postgresql

I have two tables, both of them have only 2 columns. The first one contain only latitude and longitude coordinates of my source points and the other one only latitude and longitude coordinates of my ...
1
vote
0answers
182 views

send viewparams geoserver using leaflet

I need to pass my longitudes and latitudes of origin and destination for a sql view in geoserver to get a WMS layer with the route. I've performed in qgis to view and is working perfectly. This is ...
1
vote
1answer
65 views

Implementing Wrapper of PostgreSQL?

How can I implement the Wrapper of PostgreSQL? I found this useful looking wrapper from a FOSS4G routing with pgRouting Workshop but I do not know how to implement it!
1
vote
0answers
38 views

PgRouting: What index should have the restriction table

I have this tables to feed my routing engine using pgr_trsp: vzla_rto have the links and nodes (650k) vzla_restriction have the turn restrictions (10k) CREATE TABLE map.vzla_restrictions ( rid ...
1
vote
0answers
63 views

PgRouting-How to calculate only walking routes

I am using osm2pgrouting to import data to my PostGis database from OSM and I was wondering if there is some way to specify to PgRouting to calculate paths with only ways that can be walked by people. ...
1
vote
2answers
202 views

adding geometries to a source, target table for multiple rows in pgrouting

I am having an issue trying to perform the pgr_dijkstra algorithm and getting back a line in my table for multiple rows. I have a table that has a columns of source, target node id's but I cannot ...
1
vote
0answers
34 views

Use pgRouting with a PaaS

Is it a way to use a postGIS/pgRouting enabled database with a PaaS like Windows Azure? If not, do you know alternatives?
1
vote
0answers
110 views

How to deal with direction in pgr_ksp (K shortest path)?

I am working on a android app for navigation with PostGIS and pgrouting. I have implemented pgr_dijkstra and its working fine. I am not considering direction in routing at this point and just want ...
1
vote
0answers
161 views

qGIS' Database Manager “Load as New Layer” Option Not Working

I'm trying to visualize some of my database queries on qGIS. I run a valid SQL query which returns a subset of my table that should be easily loaded as a layer. I then check "Load as new layer," ...
1
vote
0answers
208 views

how to add polylines(routes from public transport) on postgresql(pgrouting) with GUI

After searching a several long time... i decide to ask here for help, im currently using ubuntu 12.04(because of compatibility) with postgresql 9.1, postgis2, pgrouting2 and qgis2.2 i need ...
1
vote
1answer
131 views

Change The OpenLayers 3 script into openlayers 2.13

Hi all I want to change the code from pgrouting latest workshop which is used the Openlayers 3 beta to Openlayers 2.13 The code is in here http://workshop.pgrouting.org/chapters/ol3_client.html I ...
1
vote
0answers
150 views

Traversing all possible road routes

I have created a topology from OSM data and would like to simulate a car driving every possible route along the map. The purpose is to "survey" the osm data as if in a car. My ultimate objective is to ...
1
vote
0answers
52 views

How can I build a network from a latitude, longitude points? [closed]

How can I build a network from a latitude, longitude points? I have some points(latitude and longitude) and i wish to build my network based on this points.
1
vote
0answers
45 views

Create a single line from a resultset of line segments

How can I create a single line using the line segments geometry found in each row in resultset? I followed this tutorial: http://anitagraser.com/2013/07/06/pgrouting-2-0-for-windows-quick-guide/ I ...
1
vote
0answers
249 views

Problem Installing pgRouting 2.0; libcgal8 dependency

I've been trying to install PostGIS and pgRouting on an AWS Ubuntu server (first tried 13.10, then reverted to 12.04, both 64bit "small" instance) for several days now but no matter what I do I keep ...
1
vote
0answers
200 views

pgRouting results to LINESTRING geometry type

I am doing some routing queries, using pgRouting's second version of pgr_trsp function. What I can't do effectively yet is storing the results. That is, I want to able to store in a table: either ...
1
vote
0answers
36 views

What is the best way to manage permissions as root installing postgresql and postgis?

I've encountered an issue numerous times where I lock myself out of my postgres installation as a result of modifying my pg_hba.conf file and therefore screw up my postgres installation because I ...
1
vote
1answer
160 views

Route through water polygons

I have a water-polygon grid shape file as shown (Each grid is 1latx1long): I have created this in QGIS and files (coastal lines and land polygons) selected from http://openstreetmapdata.com/data ...
1
vote
0answers
354 views

How to use pgRouting (pgr_drivingDistance) with GTFS?

I used gtfs2pgrouting to import gtfs data in postgresql, then I have these tables List of relations Schema | Name | Type | Owner --------+-------------+-------+---------- gtfs | ...
1
vote
1answer
270 views

Travelling salesperson in pgRouting without starting point

I'm a beginner with PostGIS and it's the first time I try pgRouting. I work for a regional transit agency and I'm trying to develop a mean to evaluate the easiness or difficulty to offer a bus ...
1
vote
1answer
197 views

Pgrouting - Networking

my problem is regarding routing. I have a network based on bicycle graph links (SRID: 4326), with bidirected and directed ways. I want to give the user the functionality to draw a route (shortest ...
1
vote
0answers
167 views

Looking for best practice to connect multiple road vector line layers for routing (pgRouting) purposes

The Data I have: Bridges (line layer) Municipal_roads (line layer and does not include information in Bridges) State_roads (line layer that doesn't include Municipal_roads or Bridges) Question: ...
1
vote
0answers
42 views

Do I need to deal with warnings about row count and spatial index to use pgRouting?

After read this nice post from underdark A Beginner’s Guide to pgRouting, although I still have some little problems, I think I can begin the "Creating a routable road network" stage right now. I got ...
1
vote
0answers
59 views

PgRouting: Connect route to table

I would like to show the edges of the result route in a table, like this: http://routing.geosdi.org/ I did the pgrouting part, just have to make the table and connect it. How can I achieve this?
1
vote
0answers
452 views

How to calculate the shortest path between two points characterized by latitude and longitude with pgrouting?

I have to calculate the length of the shortest path between A (lat1, long1) and B (lat2, long2). But all the solutions I've found do not get a correct result because they only calculate the distance ...
1
vote
0answers
68 views

how to group interconnected edges inside a table?

Given a table and a random set of edges with source and target columns, how can I find out which edges connect with each other and then group them together using PostgreSQL?
1
vote
0answers
48 views

given sets of vehicle passing on each edge, how to get most used vehicle to avoid transition?

I have two tables: one, the resulting table from converting osm.xml via osm2po so I can use pgRouting, and another one that contains information on what edges each public vehicle passes through ...
1
vote
0answers
113 views

Didn't find route with pgRouting

I try to using pgrouting to find route, first I'm using assign_vertex_id and when I calculate the shortest route, i didn't find the route in my pgAdmin data output, and in the messages : "row number ...
1
vote
0answers
135 views

Some help installing pgrouting_dd on mac os x

I hope someone may be able to help me but i've been grapling for hours trying to install pgrouting with Driving Time to no success. I have been able to build pg routing no problem. However if i ...
1
vote
0answers
32 views

Do any know another application like pgrouting? [duplicate]

Possible Duplicate: Alternatives to pgRouting I'm using pgrouting to generate routes over a network based on navteq information. It look like a good application but I would like to know if ...
1
vote
0answers
71 views

Database has duplicate values after running pgrouting

I am a newbie with postgresql and sql statements so maybe it is a trivial question, I'm sorry for that. I am working on a postgis database and try to use the pgrouting function. My goal is to store ...
1
vote
0answers
102 views

Is this pgRouting perfomance acceptable for my tiny server?

I'm testing pgrouting functions in a tiny server with 2GB of RAM and a dual core processor. I wrote a program that create client process and they connect to the server in a specific hour to perform a ...
1
vote
0answers
195 views

About the shortest path returned by pgrouting

I have a couple of questions related to the shortest path returned by pgrouting. I have this result for example. edge_id cost reverse_cost x1 y1 x2 y2 1 ...
1
vote
1answer
246 views

postgresql pgrouting define C function function with int* arguments

I want to create a psql-C function with an undefined length list of integers (GIDs for example). An erratic example using V0 function definition that works is like: int mytest4(int *x, int i){ int ...
1
vote
0answers
129 views

Why are start and end segment not partially skipped?

Im using TRSP routing algo. I want to skip partially start and end segment part for point to point routing. Percent along start edge 0.6, percent along end edge 0.4. Route generated but start and end ...
1
vote
0answers
58 views

pgrouting with TRSP in LINUX [duplicate]

Possible Duplicate: Why are start and end segment not partially skipped? Im using turn_restrict_shortest_path algo for routing. For start and end segment it is not skipping the partial part ...
1
vote
1answer
202 views

Interpreting the geom_way in the table created using osm2po [duplicate]

Possible Duplicate: Issues while plotting the results of pgRouting shortest path I am trying to actually figure out what this column exactly represents and how to use that in my case. I ...
1
vote
1answer
432 views

Issues while plotting the results of pgRouting shortest path

I am trying to plot the shortest path returned by pgRouting. However, I am having some issues. Sometimes it comes out a mess. I have just joined the coordinates of the edges returned by the ...
1
vote
0answers
115 views

OSM_id missing from ways table created by Osm2pgrouting

GIS newbie here so excuse my ignorance if this has a simple answer. I have been playing about with pgRouting and using Osm2pgrouting to load OSM files from Geofabrik. However I just noticed that the ...
1
vote
1answer
278 views

How to get route plan with certain distance with pgRouting?

I am working for a project. I have a road network which has been imported in PostgreSQL/PostGIS database. I can query shortest path between two points. I want to get route plan with certain distance. ...