1
vote
0answers
37 views

Why can't I reproject from HARN State Plane Ft Intl to State Plane Ft?

I'm attempting to reproject a feature class that is: NAD_1983_HARN_StatePlane_Oregon_North_FIPS_3601_Feet_Intl to our standard, which is: NAD_1983_StatePlane_Oregon_North_FIPS_3601_Feet When I ...
1
vote
3answers
85 views

How to measure areas using an official CRS which is not available in QGIS?

I am very new to QGIS and doing a project on Glacial Lake Outburst & Flooding (GLOF). I am trying to find the area of a lake using images from Google Earth 7.0.3.8542. I am using the WGS84 CRS ...
1
vote
2answers
55 views

Any difference between EPSG:3003 and EPSG:102091?

I am working on QGIS 2.2.0. The PRS I am working on is Monte Mario / Italy zone 1 (EPSG:3003), with the following parameters: PROJCS["Monte Mario / Italy zone 1", GEOGCS["Monte Mario", ...
1
vote
1answer
25 views

Project one layer in qgis using projection CRS of another layer

I am using QGIS 1.6 and have imported a set of latitude, longitude points from a csv file as a layer. I also have another layer from a shape file. When I go to layer->properties for the second layer I ...
1
vote
2answers
91 views

Changing layer extent to decimal degrees?

Using ArcMap or ArcGIS 10 ... In the photo below, you can see my extent is in meters while my projected coordinate system is in decimal degrees. How can I convert my layer extent to decimal degrees? ...
4
votes
2answers
86 views

How do I construct (or select) an appropriate local Cartesian coordinate system, for an arbitrary small area?

I'm relatively inexperienced with coordinate reference systems, so please bear with me if I'm not putting this clearly. I have existing software which works with an abstract (un-referenced) 3D ...
2
votes
2answers
138 views

Adding Geographic Coordinate System and Projected Coordinate System layers

So I have two layers that I am adding into ArcMap. I know for a fact that when you added the first layer with Projected Coordinated System, the 2nd layer, which has a geographic coordinate system ...
8
votes
2answers
364 views

How to get a “classical” globe projection

I have a shapefile of the world continents in EPSG 4326. To what reference system do I have to reproject my file to get a projecting like this globe below?
0
votes
1answer
42 views

How can i figure out to convert this points to latlong?

I got below data in sql server, Learned that data is collected under zone IIIa considering Lambert Conformal conic projection in India. The data is generated from Spatial Cadastre Software. Also ...
1
vote
1answer
67 views

Converting unknown type of coordinates to lat/lon

Our company is using Total Station (Surveying Machine using SOP) to calculate GPS coordinates and its results are something like this Easting: 3250193.00, Northing: 1115573.00, Elevation: 656.00 ...
1
vote
1answer
48 views

Importing data into a project with a custom CRS incorrectly projected

I created a custom CRS for a project I am working on. I then started a new project, set to my custom CRS and turn on "on the fly" transformation. I import Rail data that I know is in my custom CRS, ...
1
vote
1answer
83 views

How can I use the proj string in java code?

I want to do projection from UTM/oblique mercator CRS to WGS84. And I know the solution to use a proj.4 string in commandline like+proj=omerc +lat_0=51.4 +lonc=7 +alpha=-10 +k=1 +x_0=0 +y_0=0 +gamma=0 ...
0
votes
1answer
76 views

How to reproject from Clarke_1880_RGS_Lambert_Conformal_Conic to ETRS_1989_LAEA?

I am unable to reproject Marseille shapefiles from Clarke 1880 RGS_Lambert_Conformal_Conic to ETRS_1989_LAEA. I know that Clarke is a geographic coordinate system and it has no datum. I have tried ...
1
vote
3answers
693 views

Formula/ calculation for ESRI map coordinate conversion (meter to decimal degrees)

I'm new to ESRI mapping. I have a set of points in ESRI, with x, y, z coordinates, which I believe is in meters. I am now writing an Android program, and I do not want to depend on ESRI, thus I would ...
1
vote
2answers
95 views

why is there a difference between using EPSG and using basic code

I have the OSgeo4w installed on my PC and I am trying to upload ITM(israel transverse mercator) landmarks to google earth. To do this I am using the cs2cs command.I noticed that i get a deviation ...
1
vote
0answers
50 views

Gauss-Krueger coordinates in Openlayers

I want to show the coordinates of my map in gauss-kr├╝ger coordinates, but nothing works. I tried another projection, displayProjection, lonLat.transform but the answers are the same. my source ...
3
votes
1answer
84 views

Does anyone know how to make new CRS to reproject some old plans?

I need to reproject some old Cadastral plans, but I can't find any appropriate CRS on web. They are in old Hungarian System (Budapest tangent plane stereographic projection) which used in late XIX ...
2
votes
2answers
795 views

which is the suitable Geographical Coordinate System and Projected Coordinate System for India

I want to create a spatial data for entire India, usually I use WGS84 as GCS and UTM zones for PCS in the places in India, but when I have to create the spatial data for entire India, I get confuse ...
0
votes
1answer
62 views

New Zealand Projection System

I have a database with Easting and Northing points of New Zealand. The data structure is as follows Easting | Northing 2595425 | 6622565 2594585 | 6622595 2595000 | 6622085 2594500 | ...
1
vote
0answers
192 views

Shapefile projection issue - layers not lining up [closed]

See below for screenshot. The purple rectangle should line up with the green rectangle in the top right (OpenLayers Google Physical layer) and the tan points. I was sent this shp and given the ...
2
votes
1answer
1k views

Trying to convert coordinates from WGS84 Web Mercator Auxiliary Sphere to WGS84

I've been struggling with this for way too long now. I've got some data that was georeferenced in the WGS84 Web Mercator Auxiliary Sphere that should have been done just in WGS84. The Auxiliary ...
3
votes
1answer
199 views

Changing the CRS of a shapefile

Im trying to convert shapefile from one CRS to another in QGIS. On the layer menu, I right click on the shapefile, save it as with other name and there I change the CRS to the desired one (WGS 84). ...
2
votes
1answer
365 views

Exporting geographic coordinates in QGis as projected (flat) coordinates

I've created some polygons with Google Earth which I'd like to convert to my flat map's coordinate system. I've loaded a few shapefiles into QGis of a county's roads, parcels, etc. The coordinate ...
1
vote
1answer
125 views

Why is there an offset between reprojection results of ArcGIS and QGIS from PSAD56 to WGS84?

I did a comparison of file system PSAD 56 to WGS 84 with arcgis and qgis and the difference is 8 m, why is the difference? This is a points file (shape) and it is in UTM Zone 19S.
1
vote
1answer
100 views

Converting NEAR results to Meters/Kilometers?

I am having trouble figuring out how to convert the units from the results of my NEAR calculations. I want to convert them to meters or kilometers, but cannot figure out how to do so... ...
0
votes
1answer
274 views

Determining the Coordinate System of shapefiles

I have 8 shapefiles which have a common coordinate system but none of them have it defined i.e. "unknown" is written when I look in the properties dialog box. However, I can see the extent which I am ...
2
votes
1answer
213 views

Transformation from WGS1984 to ITRF2008

We are using Projected Coordinate System: Ain_el_Abd_UTM_Zone_39N (Transverse_Mercator) in our GPS Devices and have valuable Coordinate data. Can I change the projection of this data this to WGS 1984 ...
2
votes
1answer
248 views

Confused about reprojecting Google Maps (latlong) to Irish Grid TM65

Trying to transform points taken from Google maps (as latitude and longitude) to Irish Grid TM65 using the spTransform in R, and I'm confused on something. Everything I find on the net tells me ...
1
vote
3answers
165 views

Copy>Paste from meter to feet coord-sys, and coordinates don't change in ArcMap 10

My dataframe coordinate system is in UTM with linear unit Meter. If I have a Polygon shapefile in a UTM coordinate system with a linear unit of Foot_US and I am sent a shapefile in the same UTM ...
0
votes
0answers
244 views

Getting: org.opengis.referencing.NoSuchIdentifierException: No transform for classification “Transverse Mercator Zoned Grid System” with geotools

Using geotools I've been trying to create a referenced envelope after converting/reprojecting from WGS 84 to UTM with specific zones and it seems that either I need to do something with authority ...
2
votes
1answer
78 views

Ok to measure and union a projected-on-the-fly shapefile in ArcMap?

I have a dataframe in arcMap 10.0.4 that is of Africa Albers Equal Area Conic PCS. I bring in a census shapefile of WGS 1984 CS and it is projected on the fly. I do 2 things: I use the calculate ...
1
vote
1answer
132 views

Modify CRS to match boundaries of shapefile

I have boundary data in WGS'84 lat/long and data in a custom generated CRS. The data in the generated CRS appears to be offset by a particular vector compared to WGS'84. I want to attempt to match the ...
2
votes
3answers
355 views

Coordinate System (Malaysia RSO Projection) not lining up in QGIS and ArcGIS for Desktop?

I am using QGIS 1.9.0 on Linux Mint; and I am new to (Q)GIS I have three layers (2xshapefiles, 1xopenlayer[Bing Maps]) that I am trying to line up located in peninsular Malaysia. Shapefile_1 is a ...
1
vote
1answer
80 views

Shapefile CRS damaged. How to bring it back?

I have two shapefiles with same location and extends (EPSG 4326). But one of the shapefiles CRS seems to be damaged after doing a lot wrong with reprojection... its not shown on the same position as ...
6
votes
1answer
105 views

Should I Reproject Data Which Has Been Captured Incorrectly?

I'm working on a project for a client which is migrating data from an Oracle database to an ESRI Geodatabase. When data for this project was initially captured over 15 years ago, the coordinate ...
1
vote
1answer
79 views

Setting coordinate systems in gvSIG: workflow or transformation issues

I am learning how to use gvSIG 1.10 (Mac OS 10.6.8 Snow Leopard). My goal is to create a simple county map of Illinois using the base data shapefiles available from the Illinois Natural Resources ...
5
votes
1answer
680 views

Does anyone know the proj4 Coordinte Reference System command line for Rectangular Polyconic Gores?

I am a GIS beginner using QGIS 1.8.0 I am trying to transform a world map from the standard WGS84 Coordinate Projection System to a set of rectangular polyconic gores, with a gore count of 12. ...
6
votes
2answers
834 views

Why do my Shapefiles not align correctly?

First: I'll summarize what I understand so far so please confirm or correct me. When On-the-Fly is selected a layer is re-projected from that of the layer's CRS to that of the project CRS, IF ...
7
votes
2answers
2k views

Is there any online tool for converting coordinates between different EPSG?

Every time I want to do conversion, I need to get into the console to run proj.4. Is there any online tools for converting coordinates between different EPSG?
3
votes
1answer
130 views

What are the highest and lowest precision Coordinate Reference Systems for US East Coast?

And does it matter what system your data layer begins with if you choose the right system for your project? Do some applications use more precise projection systems than others?
0
votes
1answer
189 views

CRS Conversion problem

My question is quite simple, this is probably why I couldn't find a conclusive answer anywhere. I have two datasets representing the same area in Romania, but in different CRS, A is local, B is WGS ...
0
votes
1answer
194 views

Why are layers not overlapping to each other inspite of having same CRS? [closed]

I am new to QGIS and working with QGIS 1.7.3 version, I have my all layers in WGS 84 CRS but even though they are not overlapping to each other, What should I do ?
6
votes
1answer
394 views

Coordinate system in aerial imagery

I am calculating WGS84 coordinates of points in an aerial image, given the WGS84 coordinates of the center of the image and the ground distance width and height (calculated from altitude and lens ...
9
votes
1answer
704 views

How can I see the coordinate transformation parameters in QGIS?

How can I see (and edit if possible) the transformation method and parameters used by QGIS for "on-the-fly" transformation, and then for saving data in another CRS? Like in ArcGIS? Here is the ...
1
vote
1answer
380 views

QGIS 1.8.0 - Define shapefile as UTM 15 NAD83 Feet

I have a shapefile which the .prj file says it is ...
2
votes
1answer
669 views

Reprojection from WGS to Slovenian Gauss Kruger in QGIS

I have gpx file (track) in WGS84 (EPSG: 4326) coordinate system from Garmin GPSMAP 62 which is right projected in BaseCamp and MapSource. When I save track as *.GPX and import it to QGIS and use ...
2
votes
2answers
554 views

What can go wrong in UTM to WGS1984 conversion (shifted data)

I try to convert .shp files to OSM data with shp2osm and ogr2osm but the output data is shifted. Semi-Cross-Posting Warning: I have already asked a questions on the OSM help site, but this questions ...
4
votes
1answer
583 views

Raster incorrectly reprojected to OSGB(27700)

Ubuntu 12.04, QGIS 1.8.0, GDAL/OGR 1.7.3, GEOS 3.2.2 Open a Spatialite db with OS Mastermap poly layer (EPSG:27700); Add OpenLayers Plugin (1.0) from QGIS offical repository; Add a Google Satellite ...
1
vote
1answer
136 views

Taking a 'custom' map and transforming its x/y co-ordinates to 'real' long/lat co-ordinates?

I was wondering if someone could help me out with a little project I'm working on. I'll try to describe what I'm trying to achieve - if it doesn't make sense, please let me know. I have in front of ...
2
votes
0answers
200 views

Coordinate systems conversion

I have the following task. This is my sample data. WGS84 datum (longitude/latitude): -123.75 36.59788913307022 -118.125 40.97989806962013 Spherical Mercator (meters): -13775786.985667605 ...