0
votes
1answer
67 views

QGIS to solve projection mystery in Postgresql

I downloaded some data from local agency. Per QGIS 2.2, I defined the projection to 'EPSG:3587 - NAD83(NSRS2007) / Michigan Central' in postgresql (maybe ArcMap). Data is in Postgresql 9.3. I am ...
0
votes
0answers
71 views

distance difference in Google Earth with exported GPX or KML compared to source shapefile

I've converted a shapefile (points) to KML with QGIS. Points in the shapefile are within 100m distance from each other. When I measure it in Google Earth, the distance changes to 80m. The same ...
0
votes
0answers
22 views

Changing original source projection

I am attempting to match up 2 raster layers, both a OS survey map and some independent survey data. The map I know to be in the correct position, However the survey data shows a layer extent of (layer ...
1
vote
3answers
81 views

How to measure areas using an official CRS which is not available in QGIS?

I am very new to QGIS and doing a project on Glacial Lake Outburst & Flooding (GLOF). I am trying to find the area of a lake using images from Google Earth 7.0.3.8542. I am using the WGS84 CRS ...
1
vote
2answers
55 views

Any difference between EPSG:3003 and EPSG:102091?

I am working on QGIS 2.2.0. The PRS I am working on is Monte Mario / Italy zone 1 (EPSG:3003), with the following parameters: PROJCS["Monte Mario / Italy zone 1", GEOGCS["Monte Mario", ...
1
vote
1answer
23 views

Project one layer in qgis using projection CRS of another layer

I am using QGIS 1.6 and have imported a set of latitude, longitude points from a csv file as a layer. I also have another layer from a shape file. When I go to layer->properties for the second layer I ...
0
votes
1answer
47 views

How to georeference a map - which is in projected coordinate system - using geographic lat long? [duplicate]

We have some hard copy maps which were projected in Gauss Kruger coordinate system (in the legend it has been mentioned). But, the coordinates were given in Geographic lat long (Beijing 1954). In ...
2
votes
1answer
32 views

Valid values of mollweide projection in QGis

i just imported a vectorlayer (without any reference points) to qgis as mollweide projection to save it to longlat. What i am wondering about is a mathematical problem: Not every x,y coordinate on the ...
0
votes
1answer
58 views

How can I reproject a layer in pyqgis?

I have a problem. I'm currently trying to get the extent of a vector layer in latitude and longitude coordinates in python. The layer is currently in EPSG:3857, so .fullExtent() is not returning what ...
1
vote
1answer
46 views

Importing data into a project with a custom CRS incorrectly projected

I created a custom CRS for a project I am working on. I then started a new project, set to my custom CRS and turn on "on the fly" transformation. I import Rail data that I know is in my custom CRS, ...
1
vote
1answer
67 views

Reprojecting kml in NAD27, 83 or WGS84 using QGis

I have downloaded a kml file from Google containing location of shops. The coordinates in that file are in lat/long. I have other shp files containing roads and territories. I am trying to have all ...
1
vote
1answer
52 views

Why are some layers saved with custom CRS while others use the appropriate EPSG code?

I have a number of .shp's that I have converted from EPSG 4148 to CPNO27. Some have come out perfectly and others revert to EPSG 1000007. I have checked and the only difference between the two is the ...
0
votes
0answers
18 views

Reconcile projections between .dxf and ESRI shapefile [duplicate]

My .dxf file that doesn't overlay or does not reproject with, like, the official shapefile for my state. The .dxf file came from a .dwg file from a local company that does pipe laying -- I just ...
2
votes
1answer
118 views

Conversion of Latitude/Longitude to different map projection

I have two m*n matrices coming from a WRF-ARW simulation: one exclusively with longitude values and one with only latitude values. For both matrices I know the originatin projection (lambert conic ...
1
vote
1answer
63 views

Why am I losing part of my raster when I reproject?

QGIS 2.0 Working with tiff raster file. Reprojections are in WGS84 Mercator. Here is my problem: I am trying to use buffers or urban areas to analyze light intensity on a raster layer. I want 30 ...
2
votes
3answers
471 views

How to reproject WGS84 to a metric coordinate system with own reference point in QGIS?

I have GIS data in EPSG:4326 consisting of 2D points, linestrings and polygons that are all close (i.e. less then a couple of hundred of meters) to a certain WGS84 coordinate point. I would like to ...
1
vote
1answer
211 views

get data from WFS and present in using d3js - correct projection

I'm trying to get data for map of Poland. I found WFS service that provides GML files. It is located under: http://sdi.geoportal.gov.pl/wfs_prg/wfservice.aspx?request=getCapabilities&service=wfs ...
1
vote
2answers
192 views

On the fly transformation From WGS84 to NAD27 with proj4 code

I want to use this proj4 code: +proj=utm +zone=19 +ellps=WGS84 +toclrk66=-3,142,183,0,0,0,0 +units=m +no_defs or this one +proj=utm +zone=19 +ellps=WGS84 +tonad27=-3,142,183,0,0,0,0 +units=m +no_defs ...
2
votes
3answers
203 views

Problems displaying reprojected WMS in QGIS 2.0.1

I'm loading a WMS layer in QGIS 2.0.1 using the coordinate reference system SWEREF99 TM EPSG:3006, a Swedish crs. The layer displays in the map but when I zoom in to Sweden using the Zoom in-button I ...
0
votes
0answers
99 views

Points warped when exporting to shape file (position off in Qgis when imported)

I have just purchased a used Trimble GeoXH and I have done some surveys. I did the differential corrections in Trimble Pathfinder Office 4.10. I have exported the corrected and uncorrected files and ...
0
votes
1answer
92 views

Different output from running algorithm in toolbox and from script

I am unable to get the same results when running the qgis:reproject tool from QGIS processing toolbox (QGIS version 2.0.1) as when running it from a Python script (console). In this example I am ...
1
vote
2answers
148 views

No prj file output from qgis:reproject

I'm trying to reproject a vector layer using the 'qgis:reproject' algorithm in the processing/sextante module of QGIS, from Python. This kind of works, but the .prj and .qpj files created after ...
1
vote
1answer
86 views

How to reproject EPSG:102218 with QGIS?

I have a raster file. ArcMap says it is in NAD_1983_USFS_R6_Albers (EPSG:102218). QGIS says it is in USER:100000 - * Generated CRS (+proj=aea +lat_1=43 +lat_2=48 +lat_0=34 +lon_0=-120 +x_0=600000 ...
2
votes
1answer
291 views

How do I convert longitude & latitude to a 3d (geocentric x,y,z) coordinate?

I'm interested in finding the centroid of a point cloud. I understand that to do this I need to convert latitude and longitude values to 3d coordinates, average them and then convert the resulting ...
0
votes
1answer
46 views

Projection system differs

There is a problem . I want to define projection for a Shape file. The projection system is: "NAD_1983_StatePlane_Montana_FIPS_2500" which is refered in Qgis 1.9 as EPSG:102700 .The same projection ...
2
votes
1answer
90 views

How to do a raster reprojection in QGIS with custom map parameter

I'd need to reproject a raster dataset in a new customized projection, but I'm fairly new at both QGIS and GDAL and I'm not exactly sure about how to proceed and what the exact syntax is. The ...
1
vote
0answers
189 views

Shapefile projection issue - layers not lining up [closed]

See below for screenshot. The purple rectangle should line up with the green rectangle in the top right (OpenLayers Google Physical layer) and the tan points. I was sent this shp and given the ...
3
votes
1answer
196 views

Changing the CRS of a shapefile

Im trying to convert shapefile from one CRS to another in QGIS. On the layer menu, I right click on the shapefile, save it as with other name and there I change the CRS to the desired one (WGS 84). ...
2
votes
1answer
359 views

Exporting geographic coordinates in QGis as projected (flat) coordinates

I've created some polygons with Google Earth which I'd like to convert to my flat map's coordinate system. I've loaded a few shapefiles into QGis of a county's roads, parcels, etc. The coordinate ...
1
vote
1answer
125 views

Why is there an offset between reprojection results of ArcGIS and QGIS from PSAD56 to WGS84?

I did a comparison of file system PSAD 56 to WGS 84 with arcgis and qgis and the difference is 8 m, why is the difference? This is a points file (shape) and it is in UTM Zone 19S.
0
votes
2answers
138 views

Converting .kml to different projection in qgis not working

I have run into a slight problem it would seem. Yesterday I downloaded qgis in the hope that it could convert a .kml overlay of some administrative boundaries from EPSG:3857 (Google maps) to ...
2
votes
1answer
93 views

Changing projection for field calculator

I've just succeeded in getting the area of a polygon using field calculator. The polygon was drawn on a Google hybrid aerial photo. There are no units given in the calculation and I assume the area ...
2
votes
1answer
120 views

How to reproject vector data?

I am evaluating QGIS with a view to visualize and manage geological exploration data. The information is currently stored in different local coordinate systems that I am looking to overlay with ...
1
vote
3answers
368 views

Can I use Openlayers Plugin with a different Datum/Projection?

There is probably already a post for my problem, but after long searching, I could not find a solution for my issue. I am working with QGIS und I am using the following projection/datum: MGI / ...
5
votes
1answer
152 views

How does QGIS reproject data?

Projection systems are always troubling and I cam across and issue yesterday. I created a buffer and did a select by location using that buffer, however it was producing the wrong results. It would ...
3
votes
3answers
6k views

How to convert x y coordinates to longitude latitude using QuantumGIS?

I'm working with this downloadable shapefile that has X Y coordinates. They are akin to '3672187.92698000, 534175.72095400'. I would like to convert them to longitude latitude so they are more like ...
3
votes
1answer
203 views

QGIS: plotting real time lat/lon GPS input on a different projection

I'm trying to plot realtime GPS over a satellite image in QGIS 1.8. The GPS data is coming in as NMEA lat/lon from a Garmin Etrex. This works when the image is in WGS84 lat/lon projection and ...
2
votes
1answer
245 views

Confused about reprojecting Google Maps (latlong) to Irish Grid TM65

Trying to transform points taken from Google maps (as latitude and longitude) to Irish Grid TM65 using the spTransform in R, and I'm confused on something. Everything I find on the net tells me ...
2
votes
1answer
147 views

How to get a correct scalebar in QGIS?

I apparently have a problem with getting meaningful scalebar values referred to a shapefile in QGIS. I think I tried all solutions suggested in other discussions, but still I don't get it. I use QGIS ...
1
vote
1answer
91 views

Vector Layers are not lining up and are scaled differently

Hey I am a first time user of GIS and I am working for a transportation map of North Carolina for a project at my work. So what I have been doing is first placing the Tiger County Boundary by using ...
1
vote
2answers
168 views

Problem with reprojecting raster from MGI 6 to WGS

When I reproject a raster from Mgi 6 to WGS 84 using Warp in Quantum gis it makes mistake ( about 380m). Is there any way to avoid this?
1
vote
1answer
131 views

Modify CRS to match boundaries of shapefile

I have boundary data in WGS'84 lat/long and data in a custom generated CRS. The data in the generated CRS appears to be offset by a particular vector compared to WGS'84. I want to attempt to match the ...
2
votes
3answers
354 views

Coordinate System (Malaysia RSO Projection) not lining up in QGIS and ArcGIS for Desktop?

I am using QGIS 1.9.0 on Linux Mint; and I am new to (Q)GIS I have three layers (2xshapefiles, 1xopenlayer[Bing Maps]) that I am trying to line up located in peninsular Malaysia. Shapefile_1 is a ...
1
vote
1answer
80 views

Shapefile CRS damaged. How to bring it back?

I have two shapefiles with same location and extends (EPSG 4326). But one of the shapefiles CRS seems to be damaged after doing a lot wrong with reprojection... its not shown on the same position as ...
2
votes
1answer
108 views

CRS Austrian Lambert/WGS84

I am totally new to Qgis (or GIS in total): My problem is to get two layers in same CRS to do an intersection and further analysis described in the blog of underdark (Groupstat tutorial). My is the ...
5
votes
1answer
673 views

Does anyone know the proj4 Coordinte Reference System command line for Rectangular Polyconic Gores?

I am a GIS beginner using QGIS 1.8.0 I am trying to transform a world map from the standard WGS84 Coordinate Projection System to a set of rectangular polyconic gores, with a gore count of 12. ...
2
votes
2answers
140 views

QGIS 1.8 on Ubuntu 12.04 doesn't transform CRS properly

I have a weird QGIS-Problem that only occurs in Ubuntu 12.04, but not in Windows 7. I've also tried this on different Ubuntu-Computers. When I try to transform a layer with WGS84 to a different ...
6
votes
2answers
825 views

Why do my Shapefiles not align correctly?

First: I'll summarize what I understand so far so please confirm or correct me. When On-the-Fly is selected a layer is re-projected from that of the layer's CRS to that of the project CRS, IF ...
1
vote
2answers
135 views

Problems with Combining Layers in QGIS

I am trying to add the political boundaries baselayer from http://www.cec.org/Page.asp?PageID=924&ContentID=2336 and then on top add points where I gathered coordinates from Google Earth (using a ...
1
vote
1answer
215 views

Projecting shp from GK3 to UTM32 with BeTa2007

I've experimented with projections of shapes, used the official provided grid beta2007 for germany and noticed differences between transforming by double exporting over custom CRS in QGIS and ...