1
vote
1answer
23 views

How to create the attribute table for a raster that was produced by the Slope Tool (ArcGIS10)?

I use the Slope Tool (Spatial Analyst Tool – Surface) of ArcGIS10 by ASTER GDEM (that was exported to UTM projection). The program produce new raster (with slope value), but the resulting raster ...
2
votes
2answers
50 views

Batch Conditional Test - For Loop with a Group of Rasters

Edit: Question was answered. Please scroll to see fixed script. Thank you everyone who helped! How do I ask a “for loop” to operate on groups of three files folder (e.x. files A, B, C), then files ...
0
votes
1answer
22 views

Using ArcGIS Polygon to Raster tool does not divide resulting raster on cells?

I try to create raster composed of small (5x5 m) cells (pixels) from a polygon in ArcGIS-10. I created a polygon (as a single object), and use Feature to Raster Tool and Polygon to Raster tool (of ...
2
votes
2answers
61 views

Group adjacent polygons with similar (but not same) attributes

In ArcMap 10, I have a few dozen tiffs with cells that represent habitat area that has been burned. Each burned cell has a Julian date of the fire associated with it. I want to end up with polygons ...
1
vote
0answers
69 views

Correlation between point feature (disease) and elevation

I have a problem! How can I calculate the correlation between point feature and Dem raster? Hypothesis: disease prevalence in high altitude is more than low altitude. I must do this in ArcGIS 10 and ...
2
votes
2answers
35 views

Setting background RGB value to invisible for multiple rasters in ArcGIS Desktop?

I'm using ArcGIS Desktop 10.0. I need to set my background rgb value of 255,255,255 to transparent. In the layer-Properties Windows > Symbology I can do it for one layer, but can I batch set this, or ...
0
votes
0answers
30 views

Overlaying Line (Vector) Layer on Raster Zones?

I will make my best attempt to clearly explain my problem. I am using ArcGIS 10 I have a raster layer with 3 values that make up zones. For the purpose of this example, lets say these zones are ...
0
votes
1answer
22 views

My raster values are always changed to zero

I'm uploading a series of XYZ data points onto GIS and the co-ordinates are coming up fine, but some of the Z values are changed to zero - and in some cases, all! I've interpolated the majority of the ...
2
votes
3answers
160 views

Merging multiple rasters with SAME spatial extent

So I began with lidar elevation data 1m resolution, and I performed a terrain analysis to extract specific ranges of elevation from the raster (1st picture is 0-1m elevation, 2nd picture is 1-2m ...
1
vote
1answer
35 views

How to change the symbology on many image files within a group?

I have a group of raster images from lidar data (so a DEM). When loaded in, they all have different symbology - so their color scheme and color ramp are all different. I would like to create a group ...
4
votes
5answers
151 views

How to group individual groups of pixels into a single class

I have a raster image with certain pixel groups of equal area. Each group represents a single house. I want all the pixels near a group of houses to have the same pixel value, i.e., I want to name ...
0
votes
1answer
69 views

netcdf daily data to monthly raster layers

I have a netcdf (.nc) file of 95GB which consisted of daily data for a 50 years period. I tried to process this with ArcGIS (Multidimension tools – MakeNetCDFRasterLayer command) and it was not ...
0
votes
0answers
27 views

How to Separate Bands Through ModelBuilder [duplicate]

Q1: I have a .tiff file containing 365 bands. Each band represents a daily variable. I want to separate each band and save as a single .tiff file. In the end, I want to have 365 individual .tiff ...
0
votes
0answers
50 views

Arcpy raster calculation producing random no data cell in output

I've been trying to get the raster calculation below to work using python: import arcpy from arcpy import env import os from arcpy.sa import * arcpy.CheckOutExtension("spatial") KSat_mm = ...
1
vote
2answers
72 views

Minimum mapping unit for raster on ArcGIS

So I have this huge national wetlands raster and I'm trying to set a minimum mapping unit of 5 acres. Meaning I want to delete clusters of pixels that are smaller than 5 acres. But the raster's ...
0
votes
2answers
66 views

Clipping a raster file into the multiple shapefiles

I splitted the single shapefile into the multiple shape file based upon their attributes. Now I want to clip the raster file into the each splitted shape file. How can I do it at once? I am using a ...
4
votes
1answer
193 views

How to add tree height values to raster / vector data?

I am new to working with raster data and I am trying to teach myself a few things. I have what I think is a simple problem but I can't seem to figure this one out after a few hours of searching Arc ...
2
votes
1answer
89 views

Find maximum and minimum value in a list of raster

I trying to write a standardisation script that standardises each raster dataset in a list of rasters by the highest and lowest values found in the list of rasters. The standardisation code is as ...
1
vote
1answer
79 views

Why does a raster with resolution 5x5m not create a grid with these dimensions? [closed]

I created a 5m x 5m raster using ArcGIS 10.0 Spatial Analyst from a point file. As can be seen in the screenshots of the image and the table, the resulting grid has a higher resoluation than is ...
1
vote
1answer
43 views

GEOTIFF Binary File with Color Display Issues

I have a GEOTIFF in QGIS that shows values of 0 and 1 and I want the 0 values to have no fill so that background vector layers can show through and so I can easily overlay things in a print composer ...
2
votes
3answers
134 views

How to reclassify only a part of a raster but keep the rest unchanged (ArcGIS or R)

I'm trying to reclassify only a certain part of a raster...not the entire raster. Here's the problem. I have a LULC raster of the entire US. There are some issues with the raster that I want to ...
3
votes
0answers
117 views

How to compute surface of raster or any point using ARCGIS?

I have a raster image whose values are a digital elevation model of terrain. I need to know the surface type (topographic characterization) of particular points along transects of this DEM. How to ...
0
votes
0answers
16 views

Raster images at edge of data frame not displaying. How can I prevent then from disapearing?

I have a series of satellite images and as I pan or zoom, the images near the edges of the data frame the stop being displayed leaving small areas with no imagery. It is seems to occur when only ...
2
votes
1answer
428 views

Calculate the values of range, sill, nugget in ordinary kriging? [closed]

I am working on temperature data, and I want to interpolate the data to any location that I specify. My programming language is asp.net4 C#. I don't know how can I determine the sill, range, nugget ...
1
vote
1answer
298 views

How can i convert a raster from continuous to discrete?

I have a tiff that is 'invalid' for a lot of tools and will not let me view the attribute table. I think this is because it is "continuous" rather than "discrete". Does anybody know how to convert it ...
2
votes
1answer
51 views

How to stop transfer of large raster into arcsde geodatabase

I have just realised that I will not have enough space on my harddrive to accomodate a raster which is being copied into an arcsde geodatadatabase. I am afraid, that if I stop the process in ...
9
votes
4answers
200 views

How to determine if point is surrounded using raster processing?

I am attempting to improve a currently extremely cumbersome vector/python process for a natural hazard model. At the moment we have a lengthy script which generates distance/bearing lines from a given ...
0
votes
0answers
38 views

recording pixel value with Python script in ArcGIS 10.x

A scripting newbie question... I'd like to write a Python script for ArcGIS 10.x that would record the pixel value for all pixels in a raster. Furthermore, I'd like to only record a given value once ...
1
vote
2answers
125 views

Copy rasters slow, increases file size

I have a folder with ~1200 aerial photos in both jp2 and tif format, of which I need about 380. I wrote a python script to get the names of the files I need, which works fine. But when the script ...
0
votes
1answer
61 views

How to force deletion of corrupt ArcSDE Raster?

ArcSDE 9.3 / ArcGIS Server 10.0 / ArcCatalog Advanced 10.0 After an unsuccessful attempt at creating a mosiac, ArcCatalog refuses to allow deletion of the corrupt Raster file. The Mosiac creation ...
0
votes
1answer
114 views

How I can merge three rasters with sum cell

I am working by ArcGIS 10 and I have three raster all of raster have value cell and I want output raster have the sum of pixels values
2
votes
2answers
56 views

Calculating loss of value from a wind turbine on surrounding properties depending on distance

I have to evaluate where installing a turbine would be most efficient, depending on wind speed and price of properties surrounding each cell in a raster. The cost on value of properties is computed ...
2
votes
2answers
190 views

How to Calculate Custom Zonal Statistics?

I have a vector polygon shapefile outlining counties for which I have a raster of nighttime-luminosity data. I've been able to compute Zonal Statistics in ArcGIS 10.0 using Zonal Statistics as Table ...
1
vote
2answers
229 views

TIFF/Raster to Point shapefile question

Apologies in advance if this question is incredibly basic, but I've been googling around and I just don't know where to start. I've downloaded some nighttime luminosity data from NASA, and the data ...
2
votes
1answer
123 views

extend the size (area) of raster

My problem is that I would like to multiply two rasters using raster calculation tool. Both rasters have values 0 and 1, but the covered area of first raster is bigger (100 x 100 miles) then the area ...
2
votes
1answer
502 views

How do I fill gaps in a raster to zero value cells?

I am trying to add some forest elevations to a DEM using ArcView. I have converted a polygon feature class of a forest into a raster with the same resolution as my DEM. Then I reclassed the forest ...
1
vote
2answers
114 views

Rasters added to mosaic dataset only display at large acale

I have a set of 357 rasters in .jp2 that I've added to a mosaic dataset. All but 7 of them display properly, but the 7 only display at larger scales, around 1:6500 and under. I've tried adding them ...
2
votes
1answer
46 views

How to choose an area (of mxn metres) within a raster that have values above a certain range

I've got a raster of concentrations of iron on Mars and I want to be able to choose several areas of either m by n dimensions in metres, or just any area in m^2, that encapsulate regions that have ...
2
votes
1answer
77 views

Wrong values in Feature/Point to Raster

I've got an XY dataset that I'd like to convert to a raster, based on the ETrel_whol field. The ETrel_whole field includes NaNs and ranges from 0-1. I would like to convert this to a raster, with a ...
1
vote
1answer
772 views

How to Build Raster Attribute Table from .tif with pixel type of float or double?

I have a raster with the extension .tif. It's a subset of 87x87 pixel with values from some 6,66 to -4,27. If I right click on it there is no Attribute Table available. However, I can change the ...
2
votes
1answer
299 views

Spatial Analysis - Calculate a cells elevation (height) above the nearest stream cell

I have searched for some ideas on how to formulate this analysis, but have come up short. I imagine there is a pretty straight forward answer; any help would be greatly appreciates. Data: DEM, ...
1
vote
0answers
37 views

What type of calculations must be done for traffic emission for buffers in land use regression?

I have a raster layer that shows traffic emission distribution by kernel density method. Traffic emission will be used as independent variable in land use regression. What type of calculations must ...
1
vote
1answer
158 views

If road lengths are raster layer, how to calculate road lengths for different buffers?

A question related calculation of road layer lengths using raster layer for land use regression. If raster layers are used instead of vector layer for calculation of land use area and road lengths, ...
0
votes
0answers
95 views

Methods to calculate Viewshed analysis

Does anyone know an algorithm to calculate Viewshed analysis? I calculated them in ArcGIS, MapInfo and SAGA GIS. I wish to calculate Viewshed analysis using algorithm or methods which I can use in ...
0
votes
2answers
140 views

Clipping polygon layer into multiple polygons via model builder?

I have a huge polygon layer created from a raster, and over that I have a watershed shapefile. I need to run a land-use regression process on each individual watershed so I'd like to clip and export ...
1
vote
0answers
301 views

Why does CON statement give ERROR 010240: Could not save raster dataset to (value) with output format GRID?

I am receiving the following error when trying to run the following code: import arcpy from arcpy import env from arcpy.sa import * arcpy.CheckOutExtension = "Spatial" env.workspace = ...
1
vote
1answer
157 views

“dataset does not exist or is not supported” using large GRID raster

I am trying my hand at arcpy for the first time to create a conditional raster from a set of threshold values. I have 3 large GRID format rasters (mos_zb3, mos_zb4, pca_finb2) I am trying to feed into ...
2
votes
0answers
43 views

Wrong pixel sums within buffers in Esri ArcGIS 10.0

I have a raster of Zambia, 100m² resolution (about 650mb). Buffers (single) at 1,2,3,4,5,10,15,20,25,30,50 km. I'm running "zonal statistics as table" in the model builder for all buffers (actually, ...
0
votes
2answers
89 views

Count the area of rasterdata in specific shapefile polygons (residential density in different districts)

I'd like to count the exact area of three different residential classes (low, medium, high) by district of a shapefile which contains 225 districts. like: district 1 has: XXX sqm low, XXX sqm medium, ...
3
votes
1answer
62 views

How to use Plus tool in ModelBuilder?

I want to have the sum of at least 2000 raster combined to one raster layer using ModelBuilder (Plus tool). I think I'm missing something here. This model does not work.