2
votes
2answers
32 views

How to add updated tiles to ArcGIS mosaic

I have several hundred aerial imagery raster tiles (in ecw format) that I have loaded into a mosaic dataset. I would now like to 'replace' or 'overlay' an older aerial imagery layer with this dataset. ...
1
vote
1answer
30 views

raster files are not exact in extent after clipping

My two layers (chlorophyll-a and Bathmetry) are not exact after I clip my rasters. My bathymetry data (1) is reporting up to 10 decimal places where as chlorophyll-a (2) is only 3 decimal places and ...
3
votes
2answers
113 views

How to generate wind direction raster using its U and V components in arcgis?

I have two raster layers representing the U and V components of a vector wind. I could generate the magnitude raster by applying (u*u+v*v) in Map Algebra in ArcGIS. Now I need to generate the ...
1
vote
2answers
45 views

Is there raster equivalent to vector Intersect?

The intersect tool that is used on vector data cannot be used on raster data. What tool can I use for my two rasters that does the same as the Overlay > Intersect tool?
2
votes
1answer
24 views

raster overlap count

Would it be possible to simply detect and count overlaps between raster files, i.e. not polygons against rasters, using arcpy? By default I don't have the spatial analyst extension for ArcMap 10.1 but ...
1
vote
1answer
51 views

rasters as independent variables in logistic regression: must they have the same values classification?

I am planning to build a predictive model for land productivity using arcGIS 10.1. and logistic regression. In my model, the Independent Variables would be, among others, distance from rivers, ...
0
votes
1answer
32 views

Symbolizing Raster using single Unique Value?

I'm dealing with a raster in GRID format. Currently it is symbolized in Unique Values and contains 5 classes. I'm trying to consolidate these to one class. Is there a way to do this and keep a single ...
4
votes
1answer
80 views

What's the correct way to reproject a population raster?

I'm working with a population raster that is in the WGS84 coordinate system, and I want to get it into a projected coordinate system (Albers Equal Area), using ArcGIS 10.1. According to the metadata, ...
0
votes
1answer
25 views

Calculating GRID Statstics

I have a GRID raster dataset with no calculated statistics. I have tried building pyramids and calculating statistics with no luck. What am I missing? EDIT: For those who don't understand: 1. ...
0
votes
1answer
42 views

Extracting info on polygons from underlaying raster layers

In ArcGIS 10.1, I have two layers: 1) raster of Topographic Wetness Index 2) vector layer of polygons representing soil types I am wondering how to accomplish what I am after, that is to get ...
3
votes
3answers
198 views

Las to bare-earth DEM: average points spacing and cell size

I am using ArcGIS 10.1 to generate a DEM (bare earth) from LAS dataset. To accomplish this, I use 'Las Dataset to Raster' tool as described in Esri website. I have read here and there in the web that ...
0
votes
1answer
49 views

How do I replace cell values of a raster using values of another raster with differing extent?

I have two rasters (raster1 and raster2). The raster1 extent is smaller than raster2. I want to replace the value of raster2 pixels using raster1 pixels. How can I replace the values?
1
vote
1answer
62 views

Need to calculate values for a cell based on surrounding landscape

I have a raster file with the urban development of a county mapped out (values: 1=urban 0=not urban). I also have a raster file with several blocks of forested land, each block of land has its own ...
2
votes
1answer
41 views

Identifying X-Y coordinates from a raster

I need to find the high and low values of multiple raster datasets individually. Then determine the x,y location of these values. I am using ArcGIS 10.1, have built the mosaic datasets I need, and ...
1
vote
1answer
65 views

How to export a Raster attribute table into a .txt using Model Builder

I'm using ArcGIS 10.1 I need to export a Raster attribute table into a .txt (or any other format Excel can import), using Model Builder. Is it possible?
1
vote
1answer
178 views

ArcGIS 10.1 Remove (or SetNull) areas of overlapping rasters

I have one raster layer that is a site suitability layer for a county. Then I have two feature classes (one for roads and one for hydrology) that I need to remove or just set to Null from the site ...
2
votes
2answers
176 views

Digital Number (DN) on satellite imagery? [closed]

How would I know if any of the satellite imagery (Landsat, ASTER, Quickbird and so on) have DN or Digital Numbers such as integer or uninteger on its pixel. I download from the USGS EarthExplorer and ...
3
votes
0answers
55 views

How to create cost surface for least cost water transport analysis?

I am working on a project to derive least cost pathways between sites by dug out canoe travel. Has anyone worked on a similar project or found a function like the Tobler hiking function that can be ...
1
vote
1answer
41 views

Exporting .tif from referenced mosaic dataset does not use functions in raster dataset

Very frustrating little issue in ArcGIS 10.1 -- I have a referenced mosaic dataset of terrain data that has a series of functions inserted (slope and several iterations of a statistics function to ...
2
votes
1answer
101 views

ArcGIS model builder: How to reclassify 16,000+ rasters and do weighted sums on these rasters per year?

I've been trying to build a model in model builder (ArcGIS 10.1) which can do the following task: I have a folder full of ca. 16,000 raster files (.asc) representing mean temperatures for each day ...
1
vote
0answers
64 views

How to create a circle vector layer with 12 sectors with Python and to save average value of underlying raster in each sector?

Hi I am writing a code with Python 2.7 using Arcpy 10.1 and I guess I am doing stuck with a silly problem that lies under my eyes. I have created a grid of points (with "Create fishnet" function) over ...
0
votes
0answers
57 views

How to extract raster using corresponding polygon using ArcPy?

I have to perform a simple raster extraction, but I can't find the way to do it. In a polygon layer, I have watersheds with their ID's. And in a folder, I have rasters, each one corresponding to a ...
1
vote
1answer
67 views

How to combine Boolean and Fuzzy logic?

So I have a set of 5 Fuzzy Memberships and a polygon feature class, to which I already added a yes/no field. For the final map, I need to combine/overlay all Fuzzy Memberships and the rasterized ...
2
votes
4answers
401 views

Combine overlapping rasters with priority to values of specific rasters?

I have 5 rasters that cover a large area. I want to combine all 5 into 1 raster. Each raster has data for portions of the total area that none of the other rasters cover. Raster C overlaps A,B and D. ...
0
votes
0answers
32 views

problem saving GRID to .img keeping original names (export by attributes)

I am really new in Python programming. I try to make a loop for Extract by Attributes tool in ArcGIS 10.1. I have a huge dataset of raster (760pc) and I want to extract a specific value. This part of ...
1
vote
2answers
101 views

Copy Jp2000 from Mosiac Dataset turns white

I am trying to copy a raster to jp2000 from another File Geodatabase that I created as a Mosaic Dataset. It came out as a whiteout in the middle. I don't know what it cause this. See screenshot : ...
1
vote
1answer
93 views

Calculation amount or number of certain pixel-values in a raster

It seems pretty simple but until now I could not find a proper solution: In a given raster i want to know the number or ratio of e.g. red pixels. Edit: to be more precise: I have a number a arial ...
1
vote
1answer
185 views

Extracting data from a raster to a polyline based on start and end points?

I have a polyline shapefile with the attributes seen above. startx and starty represent the coordinates of the beginning of each segment of a polyline. endx and endy represent the coordinates of ...
0
votes
1answer
96 views

Export raster file geodatabase to jp2 or jpeg?

Can I export or copy a raster from a file Geodatabase and create a output to jpeg or jp2000 formate? I was reading two different helpline on ArcGIS 10.1 and wasn't sure if I was supposed to export ...
1
vote
1answer
171 views

Multiply a raster list with a field value list in a FOR loop in ArcPy

I'm trying to create a simple map algebra calculation not managed by ModelBuilder, but writing it in Python is trickier than I thought. I have a list of raster in a GDB and I must multiply them by ...
0
votes
2answers
252 views

Can you change the processing extent in environment settings using python to a shapefile?

I have managed to do this manually at Geoprocessing>Environments>Processing Extent and setting the shapefile in the drop down bar. I was wonder if this could be automated with a python script? My ...
5
votes
2answers
146 views

How to force 1-bit raster output in ArcGIS 10.1 for Desktop?

Any ideas on how to force a 1bit raster output in ArcGIS 10.1? By default, ArcGIS is being very dense about recognizing pixel depth. I have a binary raster [0,1] and a mask raster [1] and they are ...
1
vote
0answers
86 views

Fill tool creating large output files from sections of a Raster

(This raster information for one of the clipped rasters) I have a raster image representing a landscape that is about 1.3Gb. I clipped the raster into 31 sections which vary in size from 10Mb to ...
1
vote
1answer
110 views

ListRasters not recognizing raster files in python

I have 2 rasters in my workspace, one in TIFF Format and the other in GRID format: "C:\ExampleFolder" When I use the python script: import arcpy >>> ...
2
votes
3answers
667 views

Clip a raster using a shapefile into multiple rasters?

I have a raster file representing a large area and a shapefile of 30 polygons representing watersheds. I would like to clip the raster with the shapefile to create 30 rasters representing each ...
0
votes
1answer
61 views

Topo To Raster executing but not creating the raster

I am using Topo to Raster by File (ArcGIS version 10.1) via arcpy on a large stream and point dataset. Arcpy runs fine and executes without issuing any error message, however it does not create the ...
0
votes
1answer
59 views

Attribute names being truncated during extraction

I have 30-40 raster layers and each raster has approximately 40 columns. The attribute/column names are very long, and the beginning of each column name is the same. During the extraction process, ...
1
vote
0answers
180 views

TIN to Raster Tool, output elevations are 3.40282e+038 and -3.40282e+038, tried calculate statistics didn't work

I have an input TIN file that I created using Create TIN. The elevations are all correct. When I convert the TIN to Raster using the tool, my output elevations are 3.40282e+038 and -3.40282e+038 ...
3
votes
1answer
124 views

Create a point at the highest value in a raster ArcGIS 10.1

I am trying to find the location of the highest value pixel in my Direct Solar Radiation Raster. I can see the extent of the data in my raster but don't know where the highest value pertains to. Is ...
1
vote
1answer
518 views

How to Create Cost Surface Raster for Least Cost Path Analysis?

I have a DEM raster and would like to carry out a cost path analysis. Among other factors such as slope, proximity rivers etc. I would also like to take elevation into consideration. According to ...
0
votes
1answer
216 views

How to get polyline features from a raster file using ArcGIS 10.1?

I have a watershed accumulation file look like this: There are several white lines by visual, and I tried the raster to polyline tool and got this: Are there better ways to extract polyline ...
2
votes
0answers
203 views

Why does Topo to raster tool stall in ArcMap 10.1?

I'm having the following problem - An 8 mile by 4 mile set of 2 foot contours. Whenever I start the topo to raster tool, I get a constant loop of the tool running. And running, and running, and ...
1
vote
0answers
102 views

Why doesn't the mosaic to new raster tool or the mosaic tool work when I try to use them?

I am trying to mosaic 4 raster datasets of elevation together using the 'Mosaic to new raster' tool in ArcGIS 10.1. I have even tried using the 'mosaic' tool and it still doesn't work. The errors that ...
1
vote
1answer
73 views

How to create a raster with rotated cell orientation from lattice points - ArcMap 10.1

I am trying to create a raster layer from gridded points where the cells have a rotated orientation. Each point is the center of a 1.6 km by 1.6 km cell, rotated to the left. Is there a way to do this ...
1
vote
1answer
202 views

How to extracting raster data to multiple polygons?

I have a reclassified raster dataset (10 classes) and I want to find out the area of each class contained within multiple (hundreds-to-thousands) polygons. I have all the polygons in the same ...
1
vote
1answer
343 views

Creating Random Points in ArcGIS 10.1

I would like to create random points across my study area (which is a DEM raster) using the Feature Class> Create Random Points. However, I need to select/copy/move/delete these points and re-arrange ...
2
votes
1answer
155 views

Hillshade tool in ArcMap returns terraced, pixelated image

I am applying Hillshade tool (ArcMap 10.1) to SRTM in Caucasus Mountains (border between Russia and Georgia). It gives me weird image with 'terraces' (see attachment). I reprojected SRTM from WGS-1984 ...
0
votes
2answers
135 views

How to identify valleys on DEM in ArcGIS 10.1 [closed]

First, What is the best and easiest way to identify valleys in a DEM raster? Second, how do you create a least-cost pathway for each valley in a region based on low angle slope and proximity to ...
1
vote
1answer
68 views

How to calculate the sum of all cells in a raster layer upstream of a specific point?

I have a rainfall map which covers large area. However, I'm interested in the total value of rainfall over a specific subcatchment. If I don't have the shapefile which defines the boundary of this ...
3
votes
1answer
498 views

How to perform a Cost Path analysis in ArcGIS 10.1?

Is it possible to model the easiest pathway through a landscape between many points (rather than just two)? I want to carry out a cost-path analysis, I would like to display the easiest pathways ...