Raster conversion between raster formats. Do NOT use for raster to vector conversion (and vice versa) - for that use vectorizing (and rasterizing)

learn more… | top users | synonyms

3
votes
3answers
36 views

How to resample a 30m DEM to a 100m slope raster properly?

I need to resample a 30m DEM to a 100m slope raster. Do I just resample the 30m DEM directly to the 100m slope raster? or, do I convert the 30m DEM to a 100m DEM and then create a 100m slope raster ...
1
vote
1answer
156 views

I'm converting a raster to TIN and a large section of it didn't convert properly (ArcGIS 10)

I've got a DEM for a pretty large area and I need to create a TIN. I'm using 3D Analyst Tools > Conversion > Raster to TIN. The process runs without any error messages, but a large section of the TIN ...
0
votes
1answer
33 views

For Loop Batch Copy Raster TIFF to BMP in ArcMap

I need to convert TIFFs to BMPs using CopyRaster from ascii to raster output TIFFs. I am not sure how to define the "outRaster" so that it will convert the rasters to BMP. I'm guessing that the line ...
3
votes
1answer
38 views

Python output for batch “FeatureToRaster” in ArcPy

I am trying to batch process the conversion of shapefiles to rasters. I am stuck on how to specify the name for each output raster file. Part of the trick is that my input shapefiles are the names of ...
1
vote
3answers
33 views

Mapinfo : How to cut a raster with a vector layer?

With mapinfo 12, i would like cut my raster layer .tab with one of my vector layer. How to do this basic task with mapinfo? Is it possible with mapinfo to convert .tab raster table toward any ...
3
votes
1answer
25 views

Convert Whitebox .dep to ArcMap DEM .tiff?

I am having difficulty converting my whitebox raster float file to an ArcGIS raster file in ArcMap 10.2.1 I followed the protocol outlined at: ...
0
votes
0answers
15 views

How to get the same cell size after and before been rasterized [duplicate]

The following information were used for rasterization of the land cover of Nigeria but got different cell sizes. The input cell size and the measured cell size of the rasterized are not the same. ...
1
vote
1answer
156 views

Convert point to grid: Numbers of cells differ

In R I am trying to aggregate points data to a grid. The data for the grid (G-Econ) comes as a csv-file. In this file each row represent a grid-cell at 1x1 degree resolution and the given ...
1
vote
0answers
26 views

Modify a Python script to one that uses RasterDomain_3d fuctionality - and writes resulting shapefiles it to one

As I am not very experienced with Python I need your help. I managed to modify a Script (that has been posted here Get boundary of raster image as polygon in ArcGIS Desktop? by ...
1
vote
2answers
1k views

Polygon to raster conversion failure - workaround for very small polygons?

As one of many processes within a workflow/script, I need to convert polygons to rasters. I am using the feature_to_raster tool in ArcGIS 10.1. This is done within a python script, but for the ...
2
votes
1answer
43 views

extract raster names by points

I use ArcGIS 10.2.2 and I have a problem with some frames extracted from a video. I have the frames (more then 1000) georeferend and I have a track file with the corresponding points. I wrote down ...
2
votes
1answer
133 views

geoserver world image publishing error (georeferenced by ArcMap)

I want to add store - WorldImage in geoserver 2.5, but I still get this error: "Could not list layers for this store, an error occurred retrieving them: Failed to create reader from ...
1
vote
1answer
29 views

Band Issues in Quickbird Satellite data

I procure data from DigitalGlobe (Quickbird Satellite data) for different periods hence data having some different band combination. I have attached an example image to show the problem. I am looking ...
3
votes
1answer
547 views

Converting GMT grid to ArcGIS readable format?

I am trying to convert a GMT grid data into a format that is readable in ArcGIS. I have already attempted to load the data into GRASS and use GDAL translate to convert into a tif with unwanted ...
3
votes
0answers
315 views

QGis Save Raster as Rendered Image

In QGIS 1.9.0 Master, when you right click on a raster in the Layers Panel and select "Save As", you can select the output mode to be "Raw Data" or "Renedered Image". When selecting the Rendered ...
1
vote
1answer
35 views

Convert shapefile to multiple single-value TIFFs

I have a shapefile that is composed of multiple overlapping polygons that represent extent of habitats of certain species. Here is a 1 MB example of such file from International Union for the ...
0
votes
2answers
47 views

Convert Raster Resolution in arcGIS

I have to analyze 8 raster layers, 5 of them are 0.5 degree resolution and the other three are 0.05 degree resolution. Firstly, should I resample the 5 to finer resolution (0.05 degree) and if ...
0
votes
0answers
31 views

how to generate the average wind speed raster from time series wind datasets (in Netcdf file form)

I download the wind speed information in netCDF form from the 2001 - 2013(i.e 1/1/2001, 1/2/2001, 1/3/2001............. 1/11/2013,1/12/2013) In NetCDF file the 1st row contains latitude , 1 st ...
3
votes
0answers
83 views

Error with feature to raster conversion in ArcGIS for Desktop? [closed]

I am trying to convert an ESRI geodatabase into a raster using the 'Feature to raster' conversion tool in ArcMap 10.1. The geodatbase is available publicly from the USDA Forest Service website (South ...
0
votes
1answer
29 views

ArcGIS Raster to Polygon conversion not always outputting Class Names?

I'm having issues converting a cropland data layer using the conversion tools>>raster to polygon tool. I try to convert the data and select the field "class names" to assign values to the polygons in ...
2
votes
0answers
76 views

How do I present labels in raster format in ArcMap 9.3?

I'm creating a raster map of a large city in ArcMap 9.3 which will be used in a third party software. My problem is that I need to find a way to include labels of street names in my output. I have a ...
0
votes
0answers
23 views

RasterToPolygon tool is looking inside the output location and not reading the fields

I am trying to convert IMG classified rasters to polygons. I created a code using the Raster to Polygon tool and it worked for 8 of the 50 files; for the rest, I get errors 010157 (Unable to open ...
0
votes
2answers
669 views

Exporting GRID to TIFF keeping (classified) symbology using ArcGIS for Desktop?

I want to export an esri grid-raster into a *.tiff without losing the symbology I created for the grid (the symbology is classified). No matter how I try to solve it I get a stretched symbology in ...
1
vote
1answer
141 views

GeoTools 10 - Convert Raster To Vector

I am fairly green with GeoTools, and having a hard time converting a raster (GridCoverage2D) into a vector format. In the hours I've spent searching this site and Google, there seems to be multiple ...
3
votes
2answers
66 views

QGIS ASCII Grid output problem

I have this .asc file of maximum temperature of a local place. This file is a result of vector to raster (GeoTIFF) conversion then GeoTIFF to ASCII grid conversion, both using QGIS. Here is a snippet ...
0
votes
2answers
41 views

Con function loop doesn't calculate for all the fifty rasters in a list

I have been trying this for hours and I know it should be easy but I can't make it work yet. I have a list of 50 rasters that I need to change the NoData to "0" values. I have the right arcpy ...
1
vote
1answer
76 views

Why does the composite raster pixel values not cover the full range of RGB and what does this mean for reclassification after conversion to int?

I have about 30 or so composite rasters in IMG format that I need to 1.) Preserve the date that the raster was created and 2.) Combine all of them. My workflow is: Step 1: raster calculator, ...
2
votes
0answers
62 views

What is the best method to convert MRSID files to other formats in ArcMap 10.1?

I have some large MRSID files of counties in TN. They are 3 banded, about 4 - 7 GB, and 3rd generation. I've been in the process of converting them to 3 banded TIFF files using Export Raster Data. I ...
0
votes
2answers
275 views

How can i convert .tif file into headerless (flat) binary files?

I am using NDVI files (value range -1 to +1) created from Landsat CDR images to produce a timeseries in TIMESAT software. My .tif file has following characteristics. File type TIFF,Data Type ...
1
vote
1answer
581 views

How to convert WMS layers to raster layers QGIS 1.8.0

I need to export a series of maps for a report. The layers imported into QGIS are all WMS files provided by the GeoBC website. As I have now discovered, I cannot export these maps using the print ...
2
votes
2answers
54 views

How to convert a raster to lat/lon points

I am working with the tri.txt (terrain ruggedness index) file from this paper: http://diegopuga.org/data/rugged/ I've uploaded the raster data from the file into ArcMAP and now have it as a .tif ...
2
votes
1answer
164 views

QGIS 2.2 Raster Merge losing color data

I'm trying to merge a couple of GeoTiff maps using Raster > Miscellaneous > Merge but the merge is only coming out in grayscale. The geotifs are using palettes color. How do I get the merge to keep ...
1
vote
1answer
72 views

How to calculate raster data in vector area?

I have two layers. One is a layer of USA ecoregions (there are 9 ecoregions). It is not raster (so it's vector?). The other layer is the National Land Use Data set (so I know where there's ...
1
vote
0answers
54 views

List of vector to one raster in PostGIS

Hi PostGIS developers! I need to rasterize a part of OSM map by coordinates. I found rather good algorithm, but can’t finish it. I have problems in STEP 3. I described all algorithm here – may be ...
1
vote
0answers
11 views

Can I create rasters from points with values based on a related table?

I have weed mapping (points) and weed monitoring (tabular related table) data in a file geodatabase. I would like to convert the points to raster based on the weed cover values in the weed monitoring ...
1
vote
1answer
67 views

How to convert raster to im object for point process model covariate in R

I am trying to convert a raster object to an .im object for use with a point process model in the spatstat package in R. I begin by creating the raster from a tiff file using the raster() package. No ...
1
vote
0answers
48 views

Making grayscale map from multiple band satellite image in ArcGIS for Desktop?

I have satellite multiple band map, I needs to make grayscale map,what should i do? what is the steps? which band and format of input are to be used in this? How to make attribute table of this? In ...
0
votes
0answers
29 views

Interpolating points to surface not working

I am trying to create a surface from points using IDW interpolation. Have tried both 3D analyst and Spatial Analyst tool with my selected xyz data sheet. It appears to process and I don't get an error ...
2
votes
2answers
332 views

Exporting 16 bit single-band to 8 bit in SAGA/QGIS

Everytime with every function (e.g convert data storage type or gdal-translat -ot Byte) the output is a completely white map with a black border. only the "save as" export works, but the TIFF also ...
1
vote
1answer
111 views

How to convert float to raster in QGIS

I have downloaded bathymetric data into QGIS. In order to use it I need to conduct a float to raster conversion. I have not been able to find how to do this on any of the forums. I have unsuccessfully ...
1
vote
1answer
66 views

How can I transform raster to vector in ArcGIS?

I want to convert from raster data to vector dataset using ArcGIS. Raster data consists of pixels and center of z values. Vector data sets consist of points, lines and polygons and x,y values. When I ...
1
vote
1answer
33 views

Exporting whole map from ArcMap to GeoTIFF not just current view? [duplicate]

I like to export my whole map which is composed of both raster and vector data to geotiff (or other raster format) in ArcMap 10.1. If I select file->export, only the current view is exported. I want ...
1
vote
1answer
58 views

Converting rasters to polygons through cell centers

With arcgis, it is possible to convert a raster image to a polygon representing the boundary of the raster using the Raster To Polygon tool. The output polygon will follow the cell edges of the ...
3
votes
1answer
66 views

Create conditional to check if raster has value

I have a problem with this code: ac = ExtractByMask(raster, "area.shp") arcpy.RasterToPoint_conversion(ac, "point.shp", "VALUE") The problem is that sometimes the raster has no value. (It's a flow ...
0
votes
0answers
108 views

How to save a WMS layer at multiple resolutions as .tif using pyqgis

How can I export a wms-map-extent as a .tif from QGIS? Is it possible to call the "Save as.." function of a WMS-raster-layer from pyqgis? (E.g. by simulating right-clicking the layer, choosing "Save ...
1
vote
1answer
726 views

Converting ERDAS (*.img) file into headerless binary file?

I am having trouble converting an ERDAS (*.img) file into a headerless binary file. I want to use those images in the TIMESAT program. I'm trying to do this in IDRISI 32 but there is an error ...
1
vote
2answers
143 views

How to produce “SpatialPixelsDataFrame” from stacked RasterLayer?

How to produce "SpatialPixelsDataFrame" from staccked RasterLayer ? I have a stacked rasterlayer and I want to convert them to SpatialPixelsDataFrame. RasterLayer information is > RAD.all[[1]] ...
1
vote
0answers
57 views

Error issues when using Cut Fill operation in ArcGis 10.2

I wonder if someone is able to assist with an issue I have about a series of errors I get when using the cut/fill tool in spatial analyst, ArcGis 10.2? Someone posted a question sometime last year ...
1
vote
1answer
116 views

Unable to open feature class Failed to execute (RasterToPolygon)

I'm trying yo execute the RastertoPolygon conversion tool in ArcGIs 10.1. I'm executing it through a for loop, then it resulted to an error (Unable to open feature class Failed to execute ...
0
votes
0answers
19 views

Extra Column after Using Polyline to Raster

Does anyone know why there is an extra column in the resulting raster file (Raster2) after using the tool Polyline to Raster in ArcMap 10.2? I had imported the cell size and set the extent to be the ...