Raster conversion between raster formats. Do NOT use for raster to vector conversion (and vice versa) - for that use vectorizing (and rasterizing)

learn more… | top users | synonyms

1
vote
2answers
119 views

QGIS 2.12.3-Lyon is unable open georefernced raster .png .tab files and says .tab is not a valid or recognized data source

I`m trying to Add Vector Layer-> Open Mapinfo File It's ok with map because it opened perfectly in Mapinfo application. What is the problem and how to fix it? I need georeferenced raster in qgis.
2
votes
1answer
40 views

Matching raster regional extent with vector region in GRASS?

In Grass GIS, I am able to import bathymetry .tif raster data however the region coordinates are not in lat/lon formar and therefore, do not overlay with my vector points which are in lat/lon format. ...
2
votes
1answer
60 views

extract raster names by points

I use ArcGIS 10.2.2 and I have a problem with some frames extracted from a video. I have the frames (more then 1000) georeferend and I have a track file with the corresponding points. I wrote down ...
1
vote
1answer
25 views

How to “clean up” undesired values in a slope raster

I have a reclassified slope raster with 3 values in band 1. My problem is that I want to polygonize this layer, but the surface is so irregular with a lot of plots in terraces and because of this it ...
1
vote
1answer
75 views

How to convert .tif to .pix or .gpr or open a .tif file in Focus

I was wondering if anyone knows how to convert a raster .tif file into some thing that PCI Geomatica (Focus) can use, such as a .pix or .gpr file? I have tried to run it through FME, but I cannot ...
0
votes
1answer
49 views

Converting Raster Orthography from MrSID to GeoTIFF Creates Colourful Artifacts

I'm using geoserver 2.9.0 to display our orthography. I've managed to get the MrSID file displaying properly however it's very slow. From what i've read to increase the performance I should convert to ...
0
votes
1answer
33 views

GRASS 7.0.0beta3 / statistics change after TIF import?

I'm new to this forum, and pretty much a beginner with GRASS (7.0.0beta3 installed atm). So my question is the following: Statistics (mean, min, max) change quite a lot after importing a .TIF grid ...
0
votes
1answer
225 views

ArcGIS Raster to Polygon conversion not always outputting Class Names?

I'm having issues converting a cropland data layer using the conversion tools>>raster to polygon tool. I try to convert the data and select the field "class names" to assign values to the polygons in ...
0
votes
1answer
50 views

How do you distribute values evenly within zones when converting polygon to raster?

I'm trying to convert a (traffic analysis zone) TAZ polygon to raster so that the population values are evenly distributed within each zone. So far, when converting the TAZ polygon, the same ...
3
votes
0answers
35 views

Creating a virtual raster produces gaps along the edges in QGIS

I've got almost 1500 .adf raster files of LiDAR data that I need to merge/mosaic into one raster. The most efficient way that I found was to create a virtual raster of all of the files: gdalbuildvrt -...
2
votes
0answers
108 views

QGIS RGB image to HSL (Hue Saturation Luminance)

is it possible using QGIS (2.10) on windows to convert an RGB image file to HSL (Hue Saturation Luminance) format. I've seen various formulas for this written in Java however they only seem to be for ...
2
votes
0answers
244 views

ImportError: No module named gdal qgis2.8.1

i am using QGIS 2.8.1 (32 bit) in windows 7). I imported two DEMs and trying to merge (QGIS>Raster>Miscellaneous>Merge)them. Unfortunately it gives me import error as below. Traceback (most recent ...
2
votes
0answers
458 views

What is the best method to convert MRSID files to other formats in ArcMap 10.1?

I have some large MRSID files of counties in TN. They are 3 banded, about 4 - 7 GB, and 3rd generation. I've been in the process of converting them to 3 banded TIFF files using Export Raster Data. I ...
2
votes
0answers
165 views

List of vector to one raster in PostGIS

Hi PostGIS developers! I need to rasterize a part of OSM map by coordinates. I found rather good algorithm, but can’t finish it. I have problems in STEP 3. I described all algorithm here – may be ...
2
votes
0answers
100 views

Choosing the map scale (1:nnn) for the given raster dimension

Starting points: let define the raster image size, say: 1800x900 pixels I want draw my own raster image map - by drawing polygons e.g. like "draw line from pixel with coordinates x100y100 to pixel ...
2
votes
0answers
614 views

How to open a raw binary raster in QGIS or R

I have a raw binary raster without a file ending, and no header file. I would like to open this in either QGIS or R and then convert to geotiff, but opening it seems to be a challenge. Here is a ...
2
votes
0answers
127 views

How do I present labels in raster format in ArcMap 9.3?

I'm creating a raster map of a large city in ArcMap 9.3 which will be used in a third party software. My problem is that I need to find a way to include labels of street names in my output. I have a ...
1
vote
0answers
120 views

Converting raster to TIN in ArcMap 10.1 is causing crashes?

I have several tiles (~200) of Lidar 1m resolution data from Geomatics group and need to convert it to TIN format (currently in .asc) to develop a flood model. Is there a quicker way of doing this ...
1
vote
0answers
191 views

Converting *.adf files to *.xyz for XPSWMM?

i am trying to convert adf files to xyz files in order to import them to XPSWMM. i also need the elevation values. however, when i use QGIS to translate the raster files (adf files) to xyz these ...
1
vote
0answers
252 views

Batch Convert GRID to TIFF with colormap and RGB

There are lots of questions on here regarding raster conversion, but I can't find anything specific to my needs (involving output as RGB and using a Colormap). I have a folder full of ESRI GRID ...
1
vote
0answers
47 views

Modify a Python script to one that uses RasterDomain_3d fuctionality - and writes resulting shapefiles it to one

As I am not very experienced with Python I need your help. I managed to modify a Script (that has been posted here Get boundary of raster image as polygon in ArcGIS Desktop? by http://gis....
1
vote
0answers
17 views

Can I create rasters from points with values based on a related table?

I have weed mapping (points) and weed monitoring (tabular related table) data in a file geodatabase. I would like to convert the points to raster based on the weed cover values in the weed monitoring ...
1
vote
0answers
191 views

Making grayscale map from multiple band satellite image in ArcGIS for Desktop?

I have satellite multiple band map, I needs to make grayscale map,what should i do? what is the steps? which band and format of input are to be used in this? How to make attribute table of this? In ...
1
vote
0answers
195 views

Error issues when using Cut Fill operation in ArcGis 10.2

I wonder if someone is able to assist with an issue I have about a series of errors I get when using the cut/fill tool in spatial analyst, ArcGis 10.2? Someone posted a question sometime last year ...
1
vote
0answers
22 views

Extra Column after Using Polyline to Raster

Does anyone know why there is an extra column in the resulting raster file (Raster2) after using the tool Polyline to Raster in ArcMap 10.2? I had imported the cell size and set the extent to be the ...
1
vote
0answers
245 views

Big data rastering using ArcGIS Platform?

I have the daunting task doing raster analysis on a record set that runs into quite a few millions, and worse still is that the data is in Hive. So far I have managed to use record set of 2 million ...
0
votes
0answers
38 views

Raster to polygon tool not working

I am trying to convert a raster to polygon in ArcGIS 10.2.2 but when I run the tool, it says complete but no polygon file is created and the tool window pops up again. I have tried converting the ...
0
votes
0answers
14 views

How to retrieve geodetic coordinates from a geotiff in Javascript?

I believe I have successfully calculated UV space coordinates by following this formula: var size = [image.getHeight(), image.getWidth()]; var xScale = directory....
0
votes
0answers
12 views

How to avoid blurred projection after transformation of .tif files

For my Project I have a lot of shapefiles and .tif files with different projections. I aimed to store everything in a gdb and transform everything to the same coordinate System (ETRS1989 UTM 32N). The ...
0
votes
0answers
28 views

Convert rasterfile into shapefile for ArcGIS Online upload/integration

I am looking for a way to integrate a heatmap (rasterfile - created in ArcGIS 10.1) into an ArcGIS Online project. <- Since it only allows Shapefiles (& .txt & .csv & GPX) and no ...
0
votes
0answers
50 views

Convert from unsigned (8 bit) integer to short integer grid

I'm looking to convert a unsigned integer grid to a short integer grid for use in TauDEM. The unsigned integer grid has values ranging from 0 - 4.
0
votes
0answers
64 views

Change raster projection in R

I'm trying to change raster projection using R and its raster library. The input raster projection is Lambert Azimuthal; this one and other params can be seen here: http://esdac.jrc.ec.europa.eu/...
0
votes
0answers
95 views

How to “INSERT” geotiff raster into postgresql/postgis table using psycopg2

Can someone walk me through how to insert a raster into a prebuilt postgresql table? The table has the postgis extension and I've been able to manually insert a geotiff using raster2pgsql, but I would ...
0
votes
0answers
203 views

Converting GeoTIFF to Idrisi raster (RST) in QGIS?

I need to convert a GeoTIFF file to Idrisi raster (RST) in QGIS. I've tried the following: Raster->Conversion->Translate It does not work and I do not know what to do? Annex GTIFF
0
votes
0answers
98 views

Convert raster cells to vector (polygon) grid?

I would like to convert a raster (representing a study area) to a polygon layer with features representing individual raster cells. The raster layer contains roughly 30 million cells @150x150m. I ...
0
votes
0answers
48 views

NDVI Raster to Polygon - What's the deal with the color ramp?

So I'm following this tutorial. At the end, the color ramp is strange. See 7:48 for the content table, and it seems the ramp resets every ten numbers. I'm wondering if I should be re-applying the ...
0
votes
0answers
54 views

Convert .adf file to grayscale heightmap

I have downloaded a zipped folder containing multiple .adf files with elevation data from http://viewer.nationalmap.gov/. I want to create a 16 bit grayscale heightmap (tif) from the downloaded files ...
0
votes
0answers
62 views

why ENVI displays colormap classified image as a RGB image

I want to do accuracy assessment in ENVI. My ground through image has 19 classes (Unsigned 16bit) when I opened it ERDAS and ARCGIS. But when I opened it in ENVI, ENVI displays these image as a RGB ...
0
votes
0answers
42 views

Jpeg image overlay embedded in KMZ to GeoTIFF

Is there a tool to convert a Jpeg image embedded into a KMZ file to a GeoTIFF file, using KMZ info for position, scale and rotation?
0
votes
0answers
174 views

Converting SQLite db file into .kmz?

How to convert SQLite db (map data) into .kmz format. I am unable to connect already downloaded sqlite db file to Global Mapper application. I have downloaded these files on my android mobile.
0
votes
0answers
28 views

Raster to point: 10 rows in the attribute table per 1 point

I have just made Raster to Point operation. In the output, if I select a point on the map, in the attribute table appear I have just selected 10 rows. How is it possible? Where, in the Raster to Point ...
0
votes
0answers
119 views

PostGis - ST_AsRaster returning raster smaller than reference raster

I am trying to convert a point geometry to a raster using a reference raster: SELECT ST_AsRaster(my_points, ref_raster) FROM my_table This works fine except it is only returning a subset of the ...
0
votes
0answers
89 views

GDAL conversion to Terragen outputs file full of zeros?

I recently learned some gdal command line syntax in my attempt to convert some geotiff files to the Terragen format. During my first attempt I noticed a message about nodata values: gdalwarp -of ...
0
votes
0answers
401 views

Convert tif raster format to jpg format

Continusly to Convert jpg raster format to tif format, i try to convert tif file to jpg: import arcpy, os , glob outworkspace = r"C:\Project\out\OtherFormat" listOfFiles = glob.glob( r"C:\Project\...
0
votes
0answers
102 views

What's the best way to convert points to raster and back again?

To convert raster grids to vector points In QGIS there we have different possibilities (grass tool "to.vect"; saga tools "grid values to points"). My problem is a little bit complicated. In the ...
0
votes
0answers
50 views

RasterToPolygon tool is looking inside the output location and not reading the fields

I am trying to convert IMG classified rasters to polygons. I created a code using the Raster to Polygon tool and it worked for 8 of the 50 files; for the rest, I get errors 010157 (Unable to open ...
0
votes
0answers
43 views

Interpolating points to surface not working

I am trying to create a surface from points using IDW interpolation. Have tried both 3D analyst and Spatial Analyst tool with my selected xyz data sheet. It appears to process and I don't get an error ...
0
votes
0answers
110 views

Long Time for conversion raster file to vector in QGIS

I'm a new user of QGIS, and I'm tring to convert a .tif file in a vector. To do that I have used the "Raster conversion" option, but it's taking long time. I'm waiting for the conversion since 20 ...
0
votes
0answers
146 views

select by attributes in modelbuilder while using iterate?

I have crated a model that iterates GPX-files from a folder and works through it and gives me a raster as output with pixel values after how many tracks passes through each pixel. This works the way ...
0
votes
0answers
104 views

Loop - convert layer to raster coming up blank

I am looping through files, selecting out building footprints one by one and converting the selected building footprint to a raster. The script worked fine for about 2 hours this morning then stopped ...