2
votes
1answer
107 views

Wrong projection high quality shapefile for the coastline of Helsinki region (Finland)

I did some spatial interpolations in R and I need a support for those. Looking for shapefiles online the best I could find was and it looks really horrible, the same area in ggplot looks like . I ...
0
votes
1answer
99 views

Using Fiona to write a new shapefile from scratch

I am new to Fiona, and trying to wrap my head around reading a csv file and writing out an ESRI shapefile. I have most of it down, but am missing two things; (1) defining the projection/spatial ...
2
votes
1answer
34 views

Valid values of mollweide projection in QGis

i just imported a vectorlayer (without any reference points) to qgis as mollweide projection to save it to longlat. What i am wondering about is a mathematical problem: Not every x,y coordinate on the ...
1
vote
2answers
99 views

How to fix shape file projections

I have a project with several shape files. The files overlapping however. I have to go to unusable extents to even see the file on the same screen. I have tried using to project to as suggested here ...
1
vote
4answers
186 views

Which projection should I use to get my WMS service to work?

All of my shapefiles have exactly the same WKT. Using http://prj2epsg.org I have verified that EPSG:3059 has the same parameters as WKT definition of my shapefiles, so I'm using 3059 in my mapfile. ...
4
votes
0answers
27 views

Projecting polygon when calculating its area? [duplicate]

I have a broad range of polygons (in vector format and in SpatialPolygonsDataFrame class), some going east-west, others going south-north, while even others span polar regions or very large ranges as ...
0
votes
0answers
18 views

buffer in qgis from layer text delimited

I have a layer of polygons in British Columbia, Canada in WGS 84 which is fine. Later I created shapefile of three points (using decimals for lat and long) through the add shapefile as text delimited ...
-2
votes
1answer
59 views

Why is it important to ensure that the shapefiles have a spatial reference system when created?

Why is it important to ensure that shapefiles have a spatial reference system when created?
2
votes
1answer
91 views

Shapefiles from Nationalgrid without a .prj file - what projection are they in?

Im working with these shapefiles: http://www2.nationalgrid.com/uk/services/land-and-development/planning-authority/shape-files/ They show pipelines & electricity grid of the UK. They do not ...
7
votes
1answer
218 views

Can I just swap out a .prj file to reproject a shape file?

I'm an experienced software developer -- but a GIS noob. I have a shape file that I am trying to turn into a SVG map with Kartograph. When I try to run Kartograph I get this error: ERROR 6: No ...
0
votes
0answers
15 views

How to Create Consistent Grids using different Projections [duplicate]

I would like to be able to create highly accurate and consistent grids to be used in my simulations. I will need to create 200m2 grids for the UK. The processing software will need data in Lambert ...
2
votes
1answer
110 views

Axis of rendered shape files not showing numbers that are latitude and longitude

I am using rgdal to render some shape file. The first is a set of building zones from NYC Open Data. The second is the NYC coast line from OSM. The Zone files seems to generally render an X axis ...
1
vote
1answer
110 views

Problem with projection of layers in QGIS

I'm having a problem with projections in QGIS that i hope someone here can help me with. I have been searching and found other people having the same problem, but have not been able to solve mine ...
3
votes
2answers
256 views

Ortho Projection produces artifacts

I`m trying to create a sphere-like view using qgis and the "world from space"-projection http://spatialreference.org/ref/sr-org/6980/ (essentialy an ortho-projection). ArcGIS wraps the shapes ...
2
votes
3answers
243 views

How to find and apply reprojection parameters?

I have a data set in one projection, and a shapefile in another, and I am trying to combine the two. I am using Python. I apologize for posting a "help me transform coordinates" question on this site ...
3
votes
2answers
132 views

Calculate distance in QGIS, wrong geographic projection?

I'm trying to do the following: I have 2 shapefiles, one containing all the public schools in NY, another one containing the hotspots in NY (both in points form). Now what I'm trying to do is ...
2
votes
1answer
54 views

Misaligned GADM shapefiles and the NE dataset

I am very new to using GIS programs, so please excuse me if this is a trivial question. I'm having the following problem: When adding a GADM shapefile layer for Uganda onto the Natural Earth set of ...
3
votes
1answer
104 views

Problem with projection in layer

I'm having problems with visualizing a layer which is in EPSG:4326 Apparently the geometry looks perfect, but I don't know why, it's not in real coordinates. I have projected it to 4326 with QGIS, ...
0
votes
0answers
114 views

why readOGR() is not reading projection information from .spj - r

0 down vote favorite I successfully import a polygon shapefile with readOGR, however the information in the .prj file is not being imported. test class : SpatialPolygonsDataFrame nfeatures : 19407 ...
6
votes
2answers
78 views

Define projection at the record level

Hopefully this isn't too dumb a question, but is it possible to define projection at the record level, instead of a whole layer or table? I want to create a "project" database for all the work my ...
1
vote
2answers
209 views

Shapefile point coordinates to lonlat

I'm currently trying to parse a shapefile (http://www.esri.com/library/whitepapers/pdfs/shapefile.pdf) with c++. While I have no problems parsing all the data I need, there is a problem with the ...
0
votes
0answers
70 views

How to use projection of a shapefile in order to have a better view in OpenGL

As you see here, this is the code that I have used to extract vertices of ESRI shapefiles in order to show them with OpenGL. I have also uploaded my project here, if you want to give it a try and see ...
4
votes
1answer
1k views

R - Plotting shapefile with geographical (raster) data

Over the last few days I have been trying to plot a shapefile over data loaded into a data.frame within R. It should be a view of radar precipitation with an overlay of the country borders from a ...
7
votes
2answers
322 views

Where did the polygons go after projecting a map in QGIS?

I'm fairly new at GIS know-how, but I've run into a problem with a projection of a world map. I have a shapefile of all countries I downloaded from Natural Earth. After projecting it into a ...
0
votes
0answers
81 views

Why does a shapfile shift after transformation?

I have a shapefile created in the raster package (ER_14.3_2000_poly). > #read in a raster file > ER_14.3_2000<-raster('E:/Ecoregions Models/Outputs/ER_14.3/ER_14.3_ConsensusMap3.asc') > ...
3
votes
1answer
203 views

Projection of Shapefiles for Spain (INE)

I downloaded the official shapefiles for the municipalities of Spain from INE here. It has a lot of shapefiles, but I found out that the right one for what I need is esp_muni_0109.shp. I would like ...
1
vote
2answers
2k views

Choosing the correct value for proj4string for shape file reading in R “MapTools”

I am having a shape file of polygons and another CSV file which contains a list of points as (Lat, Lng) pairs.. I want to check for each (lat, lng) pair from the CSV file which polygon does it fall ...
1
vote
1answer
325 views

Python GDAL/OGR: WGS84 & meters units

I'm dealing with shapefiles projected in: GEOGCS["GCS_WGS_1984", DATUM["WGS_1984", SPHEROID["WGS_84",6378137,298.257223563]], PRIMEM["Greenwich",0], ...
1
vote
1answer
139 views

If I've given two different layers the same CRS, why won't they overlay one another?

I have a "towns" and "state" shapefile for Massachusetts as two separate vector layers in QGIS. I've set the project coordinate system to WGS 84 at the bottom of the screen (next to the "coordinate" ...
1
vote
1answer
263 views

Incorrectly Projected PostGIS data in TileMill

When I bring PostGIS data in EPSG:900913 into TileMill, my layers end up on other continents. This is my workflow: (1) Save shapefiles in QGIS to EPSG:900913 (2) Import the shapefiles using PostGIS ...
1
vote
3answers
65 views

Trying to match delimited text layer to my shapefile

I'm pretty new to QGIS and having a bit of trouble getting a text layer to match my shapefile. I'm trying to plot Canadian cities on a shapefile I have of Canada provinces. The provinces shapefile is ...
2
votes
2answers
289 views

What's the correct transformation for Lambert Conformal Conic for Wyoming?

I am a newb in QGIS. I have loaded QGIS 1.8 (Lisboa) and practicing with a number of maps for portions of the state of Wyoming. My maps are mostly in UTM 12N NAD 27 & NAD 83 some are in decimal ...
2
votes
3answers
3k views

How can I get the proj4 string or EPSG code from a shapefile .prj file? [duplicate]

I have to work with a shapefile defined in an unusual projection, which my GIS software does not know about. How can I get the proj4 definition or the EPSG code for the projection?
4
votes
2answers
319 views

How do I Capture GDAL projection and create matching output (OGR or GDAL) shape files?

Working in C++, using GDAL and OGR: Depending on what the user has supplied for image input, I need to output point (or other) shape files in the same projection as the input raster images. The ...
4
votes
1answer
2k views

How to re-project shapefiles?

I wanted to re-project a QGIS project, but there is no such option. When searching for an answer I see ogr2ogr suggested for this task, by re-projecting each vector layer (shapefile in this example). ...
6
votes
1answer
148 views

Is there a difference between projecting shapefiles then rasterizing & rasterizing shapefiles then projecting?

I currently have a project where I rasterize shapefiles into simple presence/absence (1 & 0) rasters and then add each one to a running total to create a total richness raster at the end. The ...
0
votes
2answers
2k views

How to convert projection

I got sample shape files with the following *prj file content: ...
3
votes
1answer
204 views

Is there no EPSG code to use for Behrmann equal-area projection in ogr2ogr?

I'm trying to use ogr2ogr to reproject some shapefiles. The projection I wish to use is Behrmann equal-area. I cannot find an EPSG code to use for the '-t_srs' part of the syntax. Is there any way ...
4
votes
1answer
837 views

How to use DotSpatial to project/reproject shapefiles on the fly

I would like to use DotSpatial to reproject shapefiles on the fly before loading them to GeoServer. I've been looking for tutorials on how to get started with this in vain. Any pointers on where I can ...
2
votes
1answer
373 views

Uploading unprojected shape files using GeoServer REST API

I have a number of shapefiles that lack the .prj file. I'm able to upload them to geoserver using the rest api. However, I'm unable to serve them after upload. Which brings me to the question as to ...
1
vote
2answers
332 views

How to shift the Map a little bit?

I'm having trouble with two maps, both UTM33N/WGS84. They should be exactly on top of each other but there is a slight shift between them of probably a few hundred meters or so. I Tried to adjust ...
1
vote
1answer
322 views

Looking for help identifying projections and reprojecting

Hi there at the new forum, I'm still struggling with projections in qgis. The "Vogelschutzgebiete" reprojection worked. But these ones seem to be tougher: ...
2
votes
3answers
1k views

Rendering a shapefile with a custom projection in GeoTools

I have an image, a shapefile, and a method which can translate an x/y pixel location from the image into a latitude/longitude point or vice versa. I'm trying to use Geotools to render the shapefile on ...
12
votes
2answers
3k views

API documentation for Gdal/Ogr with C#

I want to assign projection to shapefile in my web C# application, for this i am using Gdal/OGR/OSR C# bindings and add osr_csharp.dll and ogr_csharp.dll references. But i am facing some difficulty ...
4
votes
5answers
2k views

How to add a projection to a Shapefile using open-source tools?

I have been given some shapefiles WITHOUT a projection. So I need to add the projection in order to display it on google map. I found the projection information I need at ...
1
vote
1answer
663 views

Overlapping map tiles with mapnik's generate_tiles.py script

I'm trying to generate map tiles using the mapnik's generate_tiles.py script, but the resulting tiles are overlapped. Example The tiles have the following directory structure: ...
0
votes
1answer
501 views

Choosing best projection/SRID

I created a shape in OpenJump and exported it to shape(ESRI) file and then imported it to SQL2008 via shape2sql , the problem is that it shows bigger than what I want, In OpenJump it shows 1meter ...
1
vote
0answers
85 views

List of methods of determining the projection of a shapefile when .prj is missing [duplicate]

Possible Duplicate: Best practices for identifying the unknown coordinate system of a Shapefile It would be helpful to mention what information is needed to perform each technique. What are ...
6
votes
1answer
707 views

projection/pyproj puzzle, and understanding SRS format

I have a shapefile that has a .prj file, with the following wkt contents: ...
4
votes
2answers
6k views

Using ArcMap, how may I convert a shapefile to use decimal degrees?

I have a shapefile that currently uses meters as the measure for its coordinate system, but the map framework I wish to use expects decimal degrees. I'd like to reproject my shapefile to use decimal ...