Spatial Analyst is a extension within ArcGIS that provides a range of spatial modeling and analysis tools.

learn more… | top users | synonyms

2
votes
0answers
74 views

How to use the multiprocessing module on python to execute a spatial join?

I have several shapefiles of the entire Amazon rainforest each with millions of polygons (they are fairly detailed and take some time to draw on ArcMap). I need each of these shapefiles to be ...
0
votes
2answers
42 views

Distance to, travel only on one surface

Looking to create a distance to wetland raster. However this travel distance must be through the water only. I have tried setting land to a high cost (e.g. 99) however doing so I have to set each ...
1
vote
2answers
51 views

Low point density analysis

I'm working on a project for a conservation plan. Part of the plan requires that areas added for conservation have less than one structure per five acres (these are pretty large, mostly undeveloped ...
1
vote
1answer
35 views

Weighted Overlay Decimal Values for Evaluation Scale

I would like to do a weighted overlay of different raster datasets. I would like my evaluation scale to be from 1 to 10 with 0.1 as the incremental value. This way for example a criteria could have ...
2
votes
2answers
55 views

How does the projection of a dataset affect the results of spatial analysis?

I am planning on conducting a multi-criteria-analysis with a number of different source datasets. A number of the datasets are found in different coordinate systems and projections. Do I need to ...
0
votes
1answer
33 views

How to make sense of multi-band global radiation output raster from area solar radiation tool

So I'm running the area solar radiation tool using the time configuration and other parameters as seen here: By selecting the "Create outputs for each interval" checkbox, the global radiation ...
0
votes
0answers
58 views

How to find a least cost path through several points?

I want to do a least cost path analysis and the least cost path has to go through several different points instead of having just a start and end destination. Is this possible? I am using ArcGIS ...
0
votes
1answer
43 views

How to find out the length and friction costs of my least cost path?

I modeled different possibilities for transmission lines with the GIS tool "Cost Path". Now I would like to find out more information about my results. First of all: Where can I see the length of my ...
0
votes
2answers
31 views

Aspect Patch Count

I am using ArcMap to create aspect maps. I want to find the how many different directions the land faces (total aspect patch count) with continuous patches greater than three. So for example I want ...
0
votes
0answers
94 views

Spatial analysis using QGIS or ArcGIS for Desktop?

I am working on the spatial distribution of commercial parking public spaces. I made a database (NUMBER PARKING PLACES, NUMBER OF PARKING MONTHLY), business subjects with adresses with activity. I did ...
1
vote
1answer
70 views

Interpolate value at a specific point using kriging

Is it possible to interpolate the specific value at a point using the Kriging tool in the spatial analyst toolbox? If not, then, how can this be done in Arcgis? To my knowledge, Arcgis only produces ...
0
votes
0answers
42 views

Unusual results with Watershed geoprocessing tool

From the starting point of that I already have a flow direction raster and a pour points feature class, I get different results if I execute the geoprocessing tool Watershed using as input the raster ...
1
vote
2answers
94 views

Understanding flow accumulation

I used this youtube video: https://www.youtube.com/watch?v=FSblORbDyhc&list=PLWJ2X2wvq78QRGzl8Un5ADF0_4m5t99iD&index=11 to learn how to run flow accumulation and was successful. I realize it ...
0
votes
1answer
69 views

Obtaining ArcView 3.2 Spatial Analysis 1.1?

Is it still possible to obtain and use a copy of the Spatial Analyst 1.1 extension to ArcView 3.2 in order to finish a final project at a University?
1
vote
2answers
51 views

SplineWithBarrier (Spatial Analyst) - different results between model builder and external python script

I'm puzzled by different results I get from application of SplineWithBarrier (Spatial Analyst) using Modelbuilder and by external Python scripting: import arcpy points_shp = "pointShape.shp" ...
1
vote
0answers
96 views

Estimating parameters of a semivariogram?

I have got a shapefile of rain gauges with a field giving the precipitation amount in a particular day. I need to interpolate the precipitation values to obtain a precipitation map for a particular ...
0
votes
0answers
52 views

How to randomly generate 3 X 3 pixel window/grid size in ArcMap?

I have a raster image in ArcMap and I want to assess the accuracy of my raster image with a reference image. So, I need to randomly generate a bunch of (i.e 50) 3 X 3 pixel window/grid size from my ...
1
vote
1answer
22 views

How to identify downhill cells for a dispersing frog?

I'm hoping that someone on here can help me out with a task. First, let me set the scene. I'm working on a movement/cost analysis for frogs dispersing from 135 wetlands located in Maine's mountains. ...
0
votes
0answers
17 views

Is there a way to terminate the Particle Track tool based upon a specific change in direction angle (ArcGIS 10.2)?

I am currently using a Python for loop structure to process a CSV file of coordinate points through the Particle Track tool in Spatial Analyst. I understand from the tool instructions that tracking is ...
0
votes
0answers
104 views

Determining Flow Direction in ArcGIS for Desktop?

I have a problem with the Flow Direction tool ArcGIS 10.2.2. After running the tool on a digital elevation model in .tif format 16 bit unsigned integer. However the result is an image of 8 bit ...
1
vote
1answer
47 views

Is there any statistical measure/tool that compares two different sets of location configurations in R or ArcGIS/QGIS?

Here is what I'd intend to do; I have a given set of facility locations as shown below; And based on a predefined one optimization criterion, I obtained the following configuration (and there are ...
0
votes
1answer
76 views

ArcGIS Spatial Analyst in arcpy - FATAL ERROR (INFDEF) DIRECTORY FULL

I have been running into this error in several geoprocessing scripts I've written lately. When I call a spatial analyst function I return this error: FATAL ERROR (INFDEF) DIRECTORY FULL import ...
3
votes
2answers
73 views

Create map(s) to help determine site selection

I have the task of creating a map in which the objective would be to help determine a site for a conference. I have the following data: Addresses of possible conference attendees (I have already ...
2
votes
1answer
65 views

Automating estimation of invert elevations using ArcGIS for Desktop?

I’m working on a project where I need to estimate about 1400 pipe inverts using the adjoining pipes and manholes. The problem is a lot of the adjoining pipes are missing elevation data as well, so ...
1
vote
1answer
83 views

Wedge neighborhood on Focal Statistics calculation

I am using Focal Statistics in Spatial Analyst of ArcMap10.2, and use the wedge type of neighborhood for a radius of 10 km around each processing pixel. I want to calculate the maximum elevation for ...
1
vote
0answers
54 views

Assigning score to raster based on cell overlap with other raster and field value

I have a set of rasters that I've assigned scores to individually (scored based predominantly on values of other fields). The scoring scale is the same for all rasters, but the factors that determine ...
0
votes
1answer
205 views

Finding correlation between point location and raster value

I have what i thought was a very simple problem but i think i may have overthought it.... I have a population density raster and a point feature layer showing the locations of X (about 70 points). ...
1
vote
0answers
42 views

Filtering for slope using kernel size in ArcGIS Desktop?

I have problem in smoothing the slope derived from digital elevation model. I want to do filter for the slope <5 degree in 7 X 7 kernel size, 5-20 degree in 5X5 kernel and >20 degree slope in 3X3 ...
2
votes
1answer
75 views

Count Number of Times 100 Feature Classes Overlap

This must have been asked before, but I can't find the exact answer and my attempts so far have not worked. Most of the overlap questions I see are for calculating the area of overlap for portions of ...
1
vote
1answer
56 views

How can I come up with the spatial variation of ndvi using arcgis 9.3.

I would like to come up with the spatial variation of NDVI of a certain area. I have the average NDVI from 1998 to 2014. I'm using Arcgis 9.3
0
votes
0answers
44 views

Create .lyr file from a raster and add to display

I'm working with rasters, there are 3 folder (input, query, result). In the input folder are the basic rasters. The user can choose between these rasters, the code can collect the rasters into the ...
0
votes
0answers
17 views

implement aspect in least cost path analysis to account for downhill and neutral ground movement [duplicate]

I am creating a least cost path model for large species that migrate over large distances across a rugged landscape (elk, deer, etc.) To calculate movement cost I am using a slope raster but I ...
0
votes
1answer
75 views

Field calculator (using ATAN)

How do I input the arc tan in the field calculator given the values of the fields to get the desired answer, I compare the answer of the manually computed arc tan value and the Atan Spatial Analyst ...
1
vote
0answers
67 views

Calculate amount of rainfall per grid

I have precipitation measurement data of some points. I calculate the spatial distribution of rainfall using thiessen polygon method with ArcGIS. This shows amount of total rainfall on polygons. How ...
1
vote
2answers
76 views

How to populate an attribute table from an interpolation (grid)

I am a novice ARC10 GIS user, with a question on how to add data from a grid file to a shapefile based on an attribute and position. I have a shapefile with fish positions (x,y) and their ...
3
votes
2answers
376 views

road density km/km2 calculation

I am trying to calculate the road density in my study landscape. I am using the spatial analyst, and the line density function. By default, the tool is setting a cell size of 3.6km*3.6km, and the ...
1
vote
1answer
50 views

Selecting different field in attribute table for kriging in ArcGIS for Desktop?

I have created a shapefile with several columns of data in the attribute table but I can not select any of the columns for a kriging except the 4 required to display (lable, northing, easting, ...
1
vote
1answer
34 views

Looking for a more effcient process for retrieving information

Using ArcGIS Desktop Standard 10.2. Need to retrieve specific information from multiple (10+) feature classes that are adjacent to/overlap/ or in close proximity to specific areas of interest ...
5
votes
1answer
117 views

Creating forest patches from land cover layer?

I have a land cover layer from which I've extracted the tree canopy class and set all values that are not tree to NULL. I've also converted it to a vector and exploded it to make single part features. ...
2
votes
1answer
185 views

Reclassify on land cover raster won't work

I'm new to GIS so I apologize if this question is basic but I couldn't find my answer online. I'm trying to reclassify a land cover raster from the National Land Cover Database. I want to reclassify ...
3
votes
1answer
195 views

Flow direction and catchment area polygons for utility water pipes

I'm working on a project where I need to show which direction the water would flow from a water pipe in case there is a pipe burst. I also need to show catchment polygons(area affected). This was ...
1
vote
0answers
90 views

Determining Euclidean Distance in Polygon using ArcGIS for Desktop?

I would like to ask about how to create an euclidean distance analysis from a polygon shapefile. I got a geology shapefile in which I want to create a "distance from geological boundary" analysis. ...
0
votes
0answers
32 views

Accessing Spatial Analysis in ArcGIS Online?

I have an ArcGIS Online Organization account but when I click the down arrow next to a layer I do not see the spatial analysis option. How do I get to the spatial analysis? I have watched Esris ...
2
votes
1answer
119 views

How to find local maximum using arcgis

I would like to find local maximum with the moving window 3x3 of a raster image but I don't know how to do this. Could you please suggest me the way to do this?
-1
votes
1answer
186 views

Calculating average NDVI

I would like to calculate average NDVI values. I have 3 values of NDVI: high:243 low:0 high:243 low:0 high:238 low:0 How can I use a a raster calculator to calculate the average valvue
3
votes
0answers
135 views

How to display the slopes that only facing west using ArcGIS for Desktop?

Here is what I am struggling with ... In ArcGIS for Desktop I have to Derive and symbolise areas considered susceptible to avalanche risk based on the following simple rules: areas with a slope ...
2
votes
2answers
149 views

How to calculate percentage of selected area from DEM?

I am working with elevation data and performed a local operation to convert it from meters to feet. I am interested in finding the area (expressed in percentage) that is above 4000 ft, but I have ...
0
votes
2answers
40 views

Creating new raster based on spatial extent and classes of one raster and average of another using ArcMap?

I have a raster that is split into classes and I wanted to make a new raster with this raster's spatial extent and classes but displaying the average values from a different raster. I am not really ...
1
vote
0answers
196 views

How to perform a weighted overlay analysis with categorical classed data?

I have several land use layers (vector polygons) that all contain a field about land use in different classification systems and would like to combine them to a single classification. I would like to ...
0
votes
0answers
83 views

How to minimize output raster errors using topo to raster tool

TLDR:Is there a way to specify an angle of rotation for an interpolation output based on the angle of input lines? In our line of work, we often create straight line contours that represent a sloping ...