Spatial Analyst is a extension within ArcGIS that provides a range of spatial modeling and analysis tools.

learn more… | top users | synonyms

2
votes
1answer
55 views

Raster statistics along polygon edges

I would like to summarize raster statistics along the edge of each parcel/polygon in a shapefile. For each parcel shown below in yellow, I would like to calculate the average, min and max value of ...
0
votes
1answer
802 views

Combining two overlapping rasters (combine cells, retain both values) using ArcGIS for Desktop?

Using ArcGIS 10.2, I am trying to combine two rasters which are identically overlapping in shape and extent, but with different values and counts. As an end result I would like each cell to retain ...
0
votes
3answers
94 views

Error in Conditional Tool of ArcGIS for Desktop?

I am trying to extract stream raster from a flow accumulation raster using Conditional Tool in Spatial Analyst. Here's my input: Input Raster: FLOWACC.tif Expression: Value >= 3.5 True Raster: 1 ...
1
vote
0answers
58 views

CostPath gives error for specific points?

I am using the tool CostPath. As an input feature destination data I've entered several points (no specific value, just distributed geographically), and as the cost distance raster I've entered the ...
2
votes
1answer
291 views

ArcGIS Viewshed without Observer Points

I want to create a viewshed around a LineFeature. The problem is, I have no observer points. I would like to create them with a gap of 10m around the line feature. The LineFeature should be 1m over ...
0
votes
0answers
25 views

Kernel Density Analysis using R and ArcGis [duplicate]

I am doing some Kernel Density Estimations, and like everyone elese I face difficulties with setting the bandwidth to create georeferenced rasters. ArcGis (10.1) does it just fine, but it has no ...
4
votes
1answer
109 views

Arcpy Cell Statistics - maximum number of input rasters

I am running cell statistics in arcpy. Essentially I am summing together a folder of grd files to create a new grd representing their sum This will eventually take place on a folder of 20,000 raster ...
4
votes
1answer
74 views

Using Spatial Analyst Classification in ArcGIS Engine?

I tend to use ML classification of Spatial Analyst ToolBox in ArcGIS Engine, I wrote this sample code: ESRI.ArcGIS.RuntimeManager.Bind(ESRI.ArcGIS.ProductCode.Desktop); IAoInitialize ...
2
votes
2answers
91 views

Arithmetic on rasters with variable names in Map Algebra/Spatial Analyst?

I'm a Python (and StackExchange) novice trying to figure out how to perform calculations on temporary rasters with variable names. My attempt at a minimum working example is below, but I would ...
2
votes
0answers
566 views

Cause of ExecuteError: ERROR 010067 from arcpy.sa.CostPath?

By using the code below that creates least-cost paths between several polygons, I obtain this error message: ExecuteError: ERROR 010067: Error in executing grid expression. Initalization failed ...
3
votes
2answers
424 views

How to use Vector Ruggedness Measure (VRM) tool from ArcScripts at latest version of ArcGIS for Desktop?

I need to use the Vector ruggedness measure (VRM) tool available from http://arcscripts.esri.com/details.asp?dbid=15423. However, I am using ArcGIS 10.2 for Desktop and these tools are made for 9.0, ...
1
vote
0answers
93 views

Error issues when using Cut Fill operation in ArcGis 10.2

I wonder if someone is able to assist with an issue I have about a series of errors I get when using the cut/fill tool in spatial analyst, ArcGis 10.2? Someone posted a question sometime last year ...
1
vote
0answers
51 views

how manage mysql spatial polygons in parent child style

I want to store location-polygon data in a parent-child relation. I am using spatial data in MySQL and Google map for polygon. Eg: World 1.1 US 1.2 China 1.3 Japan 1.4 South Africa 1.4.1 Pretoria ...
3
votes
3answers
521 views

How to extract surface from air photo avoiding trees and buildings?

I am working with Drone air images. These are geotiff images and clearly portray trees and buildings. I need to first classify the image according to land cover distribution, then need to remove the ...
4
votes
1answer
259 views

Running focal statistic with iterator in ModelBuilder?

I need to extent the Value of a grid (water mirror elevation) within the nodata area until reaching a specific barrier (the limit of the watershed), in ArcGIS 10.2 for Desktop. I am using this: ...
2
votes
3answers
160 views

Zonal Statistics as Table Tool

I have a slope dataset. I have a polygon shapefile with territory within the extent of the slope map. I have to calculate the real surface area of this shapefile using the zonal statistics as table ...
1
vote
1answer
286 views

Calculating real surface area using Zonal Statistics as Table Tool?

I have a slope dataset. I have a polygon shapefile with territory within the extent of the slope map. how do I calculate the real surface area of this shapefile using the zonal statistics as table ...
1
vote
1answer
132 views

ERROR 000824 while trying to run IsNull Method outside ArcGIS?

I am trying to perform IsNull function to a raster using PyScripter. This is the code I use: import arcpy import arcinfo InRaster = "C:\\data\InRaster" IsNullRa = "C:\\data\IsNullRa" ...
1
vote
0answers
28 views

Calculating average raster values around set of points using ArcGIS for Desktop (or R)? [duplicate]

I have a 30-m elevation raster as well as a set of points that overlay the raster. For each point, I want to calculate the average elevation within a 5-km radius of the point. One way I was ...
2
votes
0answers
66 views

ArcMap - proportion of polygon in lon/lat grid cells

I have a polygon representing a river basin on a 1 X 1 degree lat/lon grid. I need to create a boundary using the grid cells as the boundary to best represent the outline of the basin. I would like to ...
0
votes
0answers
124 views

How to reassign the values of a raster, based on the pixels of the raster beneath it?

In ArcMap 10.2.1, I have two rasters. Raster1 shows the extent of a habitat, and each pixel contains a categorical value for its land cover type (values 1-3). Raster1 has the smaller spatial extent of ...
0
votes
1answer
345 views

Error with the Contour (Spatial Analyst) tool in ArcGIS

I am having an issue with the Contour (Spatial Analyst) tool in ArcGIS. When I manually run the tool in ArcToolbox, it will sometimes say that the tool has failed, giving the following error message: ...
1
vote
1answer
55 views

Kriging with expectation of 0, beyond the data supports

I am trying to Krige in ArcGIS from point samples of a chemical concentration. Towards the center, most of the points are larger, and on the periphery, all of the points are 0. The generated raster ...
2
votes
1answer
67 views

strange banding in output raster after weighted overlay

I am trying to conduct a weighted overlay. I have two rasters, one is a continuous slope raster that I reclassified to have 6 classes (8bit signed integer), and one is an elevation raster that I also ...
2
votes
2answers
1k views

calculating zonal statistics of raster data in multiple overlapping zones and combining them into one table

The aim here is to calculate the max, min, mean, range, sum, count and std of raster data contained in areas delimited by polygons (much like what the Zonal Statistics as a Table tool from Spatial ...
1
vote
2answers
157 views

Feature Distance for each Raster Cell

I have a polyline layer of roads and a raster of land ownership. For each raster cell I would like to calculate the distance to the nearest road. I am on ArcMap 10.2 with Spatial Analyst and 3D ...
0
votes
1answer
104 views

Raster data with no values (ArcGIS)

Used a DEM raster and then used the extract-by-mask feature to shrink it to the shp file I'm working with. However, when I try to get unique values, it gives me the following error message: "The ...
0
votes
0answers
89 views

Choosing appropriate Interpolation Tool [duplicate]

I am interested in doing some fairly simple interpolation work in the next few weeks using ArcGIS 10.1. However, I am unsure about which interpolation tool is most appropriate for the task at hand. ...
3
votes
1answer
150 views

Creating constant slope DEM using ArcGIS Desktop?

I wanted to create a DEM of constant slope say 1/3000. How can I proceed in ArcGIS Desktop 9.3? The area may be 1000m x 1000m or any other as per convenience.
1
vote
0answers
34 views

Trying to combine 29 zip code service areas into 10 or fewer service areas

I am tasked with coming up with 10 or fewer zip code service areas based on 29 pre-existing zip code service areas. The zip codes cover 5 counties and many service areas, obviously, overlap. The ...
2
votes
1answer
233 views

Obtaining average value around polygon in raster for different cross sections?

I have elevation data in a raster, river (blue line) and the flooded area (black polygon) as shown in the image below: I want to find the water depth in the flooded area (inside the black polygon). ...
1
vote
1answer
140 views

Why is my spatial join count 0 in ArcGIS Desktop?

In arcMap, I have a list of locations with lat/long. From a previous post, I learned about the Spatial Join tool to determine the amount of joins that I have. I tried to use the tool with my states ...
0
votes
0answers
95 views

What is GDAL equivalent to ArcGIS Lookup (Spatial Analyst) tool?

I use the Lookup (Spatial Analyst) tool to create several raster layers from a combined raster layer. I know ArcPy can do the same thing. However, I would like to know whether GDAL (or another ...
1
vote
0answers
198 views

How to extract NetCDF raster values to time enabled shapefiles?

Does anyone know a good way to extract NetCDF raster values to each data point from a time enabled shapefile at the correct time? I have tried using a python script tool and a loop that steps ...
0
votes
1answer
206 views

Extracting NetCDF raster values to time enabled shapefiles - what's wrong with my python script?

I'm trying to make a python script tool that extracts the values from a NetCDF raster to each data point from a time enabled shapefile at the correct time. My NetCDF raster consists of monthly sea ...
5
votes
2answers
77 views

Compare slopes between adjoining line segments

Using a DEM, I assigned slope values to individual segments in a street network feature class. In some areas the slope values seem suspect, such as where a highway overpasses a local road. Is there a ...
1
vote
2answers
207 views

Using Spatial Analyst Sample tool

I have a bunch of rasters and a point file. I need the information from ll the raster files to be added to my points. My usual workflow is to use the Spatial Analyst sample tool. It works fine and ...
0
votes
1answer
33 views

Contouring surface with barriers?

I'm using ArcGIS Desktop 9.3, and I want to contour a surface with barriers. Every time the result is a polyline contour shape file which covers only a part of the surface not the whole surface. ...
2
votes
2answers
77 views

How do I create zones using location features? [closed]

I have a list of rock art sites with a recording of every image within each site. For example, Site 1 has 4 kudu, 1 lion, 3 males and a locust; Site 2 has 2 leopards, 1 elephant and 3 giraffes; Site 3 ...
1
vote
0answers
42 views

ExtractByMask with one mask and multiple layers ArcMap

I have a multiple cost distance rasters and multiple feature layers. I need to find and join the feature layers (or associated shapefiles) that lie within a threshold of costs on the cost rasters. For ...
1
vote
1answer
72 views

Aggregate the raster from the Combine Tool in Spatial Analyst--->Local

I have a raster file created through the Combine tool (Spatial Analyst--->Local). The attribute table is showed below. Its resolution is roughly 10m. I would like to aggregate it to 50m with each ...
1
vote
2answers
277 views

Open source, Python option for Arcpy's Con tool?

I'm wondering if there is a method to perform a function similar to Arc's Con tool, using open source options in python. I have two rasters, one that shows locations of clouds and the other is just a ...
0
votes
2answers
287 views

Identifying clusters of points within a given distance

So I have a database of lats/longs representing incidents occurring on or near roadways. My goal is to identify the street block areas with the highest number of incidents in the database. I don't ...
0
votes
1answer
45 views

Z values all equal 0

I have just posted a similar question, but I solved part of it, however it has now lead to a new problem. I have a point layer, and have got the x,y and z coordinates from 'extract values to ...
3
votes
1answer
49 views

Can't save result of “Extract Values to Points (Spatial Analyst)” inside the working feature dataset!

I have a file geodatabase in which I have a feature dataset. I have some feature classes inside the feature dataset. I wonder why when I attempt to save the result of Extract Values to Points (Spatial ...
1
vote
0answers
125 views

Errors while running Region Group tool

I am getting an error while using Region Group on a large dataset. The errors are specified below: ERROR 999999: Error executing function. The table was not found. [VAT_final002] A column was ...
1
vote
2answers
2k views

AttributeError: 'int' object has no attribute 'save'

I am trying to use a conditional statement to generate a raster with binary values from a raster with probability values (floating point raster). This is easily done within ArcMap by batching the ...
1
vote
1answer
92 views

Need to calculate values for a cell based on surrounding landscape

I have a raster file with the urban development of a county mapped out (values: 1=urban 0=not urban). I also have a raster file with several blocks of forested land, each block of land has its own ...
1
vote
2answers
231 views

Avoid NoData after Focal Statistics Majority

I am currently working with some classified land cover rasters (containing 8 land cover classes) in ArcGIS 10.0. I would like to make them look smoother and have therefore used the Focal Statistics ...
1
vote
1answer
57 views

How can I calculate the nearest distance to a landscape element taking the direction into account (i.e. slope direction, prevailing winds)?

I am trying to build a layer of distance to relevant landscape elements in a watershed. To be relevant, a landscape element must be downstream with respect to the runoff direction.  Clearly, I want ...