Division or partition of geometric features

learn more… | top users | synonyms

2
votes
2answers
135 views

Method to split line segments in a road network that are greater than X length into n smaller line segments using ArcGIS?

I'm using ArcGIS Desktop 10.2 and I'd like to take roads in a network greater than a certain length and split them into equal smaller pieces. I've noticed that splitting by percent can be achieved via ...
2
votes
2answers
401 views

Set a split policy/rule on a field without domain in ArcMap

Can you define a split policy or split rule on a field without a domain? When a domain is involved, you can set the default value of the field and chose a rule for when a feature is split or merged. ...
2
votes
1answer
229 views

How to split Polygons by line grid?

I want to split a polygon by a intersecting line into different parts, exactly like in this post(Qgis - Is there a way to split a polygon layer with a line layer?). I have a vector grid to cut the ...
2
votes
2answers
712 views

Using ST_split to split a line feature using nearby points

I have a line shapefile and a point shapefile, and the line has just one segment and its attribute table, the point shapefile has points near the line above, not on it and the close ...
2
votes
1answer
1k views

How to split multiple lines into equal parts or overcome split tool limitation using Basic or Standard license?

I would like to split multiple lines into equal aproximately 10m lengths. (Line length / 10m = number of segments) The split tool can only split one selected feature at a time. To overcome this I can ...
2
votes
2answers
625 views

Cut layer into many parts using shapefile?

I have a layer which is a map of a town, and a shapefile which shows the boundaries within that town. I wish to cut the layer up along each of the internal boundaries so that I end up with many ...
2
votes
1answer
626 views

Splitting large shapefile into numerous smaller files based on number of objects in each smaller file using?

I have a shapefile containing approximately 600 000 point-objects. Unfortunately, for a couple of reasons I need to split this file into a larger number of shapefiles each containing approximately ...
2
votes
1answer
56 views

Polygon split with defined area

I have polygons with interpolated data like on the picture on right. Now I want to split this polygon into smaller polygons with predefined similar area. Positions of these smaller polygons must be ...
2
votes
1answer
567 views

Split polygon into several smaller polygons in QGIS

I have a layer of polygons depicting response boundaries, I would like to break each of these polygons into a number of sub-polygons. As this is for an exploratory project, the polygons themselves ...
2
votes
1answer
139 views

How to programmatically partition a large Polygon in smaller parts within a given Area Threshold?

I'm looking for a Java library, or even an algorithm to do the following: I have a large polygon, about the size of a large city. I need to break it down into smaller polygons such that: The area ...
2
votes
1answer
523 views

Optimizing ArcPy code to cut polygon?

There is a lot of nested loops and wondering of ways I could speed up this code? Any ideas? Note: This requires ArcMap 10.2 def cut_geometry(to_cut, cutter): """ Cut a feature by a line, ...
2
votes
2answers
191 views

Mapping Russia - Int'l dateline splitting polygon

I am having the issue where the International Dateline is splitting a polygon I am working with. I have a layer of the "Federal Districts" of Russia, and the eastern most federal district is being ...
2
votes
1answer
755 views

How to split zAware polyline by points programmatically with C#?

I'm trying to split a polyline by the boundaries of a polygon using IPolyCurve2.SplitAtPoints using C#. The polyline I'm trying to split is zAware and holds elevation values at a regular interval. ...
2
votes
0answers
33 views

Split Polyline QGIS - Too Many Resultant Features

I'm trying to split a single polyline into 2 polylines (I have lines that loop back on themselves, and I need to split each one into two lines: one for going, and one for coming back). When I use ...
2
votes
0answers
254 views

Splitting Line.shp at Point.shp with Python/ogr

I'm trying to modify some ESRI Shapefiles using Python with gdal/ogr module. What I want to do is quite simple, but I didn't find any solution by now. I have two shapefiles: (1) Lines.shp and (2) ...
2
votes
0answers
258 views

How to split a raster into x tiles that overlapped by x km?

I have a raster that I split into three tiles by using the function Split raster in ArcMap as follows: How can I split my raster into three tiles that overlap by 2 km as follows : ?
2
votes
0answers
44 views

Dividing a polygon into two OpenLayers

I'm using OpenLayers to draw a polygon to my users. I want the ability to implement through a line, split the polygon into two, with the cutoff line that the user drew. Does anyone know if this is ...
2
votes
0answers
169 views

Dividing a line into 250m segments

I am currently working on a hydrology project where I am trying to break a stream network into 250m segments. The problem is that the streams are not all adjacent, as I have clipped the NHD file to ...
1
vote
2answers
36 views

How to split osm data

I have a gigantic OSM geodata file of a city, and I want to split it into smaller files according to each group of tags. I googled it up and i found that there is a jar file caller splitter.jar . i ...
1
vote
3answers
856 views

How to split a line every x meters? [duplicate]

I have a line that I ultimately want to split up into points. The points should be every 100 meter along the line. So I don't want to extract the nodes. Are there any OpenSource (QGIS, Python) tools ...
1
vote
2answers
37 views

Split on a dash in python

SO I am looking to do a split on a attribute that looks like 45-4. Now all the attributes have values. here is my code so far: import fme import fmeobjects def processFeature(feature): f_type ...
1
vote
3answers
75 views

How to remove identical lines from layer in QGIS?

I converted polygon layer to line layer using "Polygons to Lines" tool. Then I used "Split" function of the Networks plugin. What I need to do next is to remove identical lines that were shared ...
1
vote
2answers
152 views

How to make digitization more detailed afterwards with QGIS?

I digitized already two areas, bordering each other on one side. Than I realized, more detail was needed! What do you suggest as a fast way to do so? Adding each time new dots/verteces takes so ...
1
vote
1answer
83 views

Split a polygons into many polygons based on points using ArcMap

I have: A polygon feature that is a national park boundary, A multi-point feature that are security guard posts (number = n ) of the same park. I want to divide the national park area into 'n' ...
1
vote
3answers
693 views

Divide Line Into Sections Using Points Offset from It in ArcGIS Desktop?

I have track (line) and milemarkers (point). Each point is offset by a different distance. Is there a way to find where each point would intersect the line if going perpendicularly out from the line? ...
1
vote
1answer
33 views

Empty feature classes made when trying to split by attribute

I am working with a Basic license of ArcMap 10.3, and I am trying to split a feature class into multiple feature classes in a geodatabase by unique values of an attribute. More specifically, I have a ...
1
vote
2answers
80 views

Splitting raster in QGIS? without cliper

I have polygon grid layer and raster image whitch want to split with my grid layer to have 9 new raster layers. I was doing it like this guy but my QGIS stop working and shut down every time when I ...
1
vote
1answer
118 views

FeatureToPolygon (to cut polygons by line) not working correctly outside of ArcGIS

I asked a question yesterday, about splitting polygons using a line, and I ended up using the approach that is described in the comments here. Although this worked with my test data, it causes a lot ...
1
vote
1answer
119 views

Split field name of feature class in ArcGIS

Is it possible to split a field name within an attribute table of a feature class into two new fields where just the field name is being split. Please note that I do not need to split the features ...
1
vote
2answers
137 views

How to get the LineStrings from a MultiLineString

I was wondering if there is a way I can extract the LineStrings from a MultiLinestring object. What I am really trying to do is look into a MultiLineString and see if I have a certain LineString. I ...
1
vote
1answer
280 views

Force St_split() to return geometries in specific pattern

I'm Using PostGIS st_split() to split a polygon geometry by a linestring. Then I use st_dump() to return each of the splitted geometry and it is working fine. But the issue is I want to force ...
1
vote
2answers
137 views

How can I split polygons in the Natural Earth 10m land shapefile?

This problem, that I have also been struggling with, in QGIS 1.7.3 as well. Here are the steps to reproduce the problem: 1)Download Natural Earth 10m land shapefile from original website. *2)*Open ...
1
vote
1answer
126 views

Writing length of line along the line

I sometimes have to write out the length along a line for every couple of hundred meters or kilometers. This applies to pipes, when the construction team wants to know where along the pipe they are or ...
1
vote
1answer
52 views

using qgis to split geometry in postgis: how to add unique id and copy original data in linked tables

We have set up a postgis database to manage all our old shapefiles. There is one table that contains the geometry and some basic information. There are several tables linked to that in a 1:m ...
1
vote
1answer
62 views

Splitting a Line on a Polygon QGIS 2.10

I am currently creating a polyline shapefile and need to split a line so as to add in a new off shoot. Would anyone happen to know how to split a polyline in QGIS? I have tried the split features ...
1
vote
2answers
192 views

Cut/Clip/Split a polygon with another polygon from same layer (Editing) - Qgis 2.8.1

To not have overlapping polygons/features I normally use a practice where I use one or more polygons to clip/shape other polygons. This is often much faster than tracing when adding polygons etc. I ...
1
vote
3answers
531 views

Cut polygon into new polygons using lines in ArcGIS

I'm new to GIS and I work with ArcMap. I have a layer with an orthophoto of a graveyard. On top of that, a layer with an old scanned map of the same area showing all graves. I would like to make a ...
1
vote
1answer
122 views

Ratio policy for Intersect in ArcGIS Online?

I have two polygon layers in ArcGIS Online (for organizations) stored as Feature Layers; one is population block, another is the AOI polygon. They are overlapping and I want to find out what portion ...
1
vote
1answer
478 views

QGIS - split polyline

I need to create a shapefile with crossed streets. I can't split the lines to number each segment with the house number ranges.
1
vote
2answers
59 views

Splitting polgons in QGIS produces topology errors

I am trying to split existing polygons but when I do, gaps and overlaps are created between the polygon I am cutting and adjacent polygons. I have snapping switched on and have enabled topological ...
1
vote
1answer
49 views

Split linear features from non-linear in the same feature class

I have a vector layer (Originally a raster layer) of well sites, cut blocks, and seismic lines all lumped together in the same feature class and no distinguishing attribute between them. I want to ...
1
vote
1answer
960 views

ArcGIS 10.2 Extract Polyline from Start/End Coordinates

I have two files. A polyline shape file of highways and a spreadsheet that contains beginning and ending coordinates w/ descriptions of segments of the highways. For example: BegX, BegY, EndX, EndY, ...
1
vote
1answer
121 views

ET Geotools Split Lines at Vertices Issue

This might seem like a really simple question but for whatever reason I can't figure it out. How do I run the split line tool in ET Geotools on an entire polyline layer? I can do it for a single ...
1
vote
1answer
455 views

Splitting polygons in OpenLayers is not working

I have some WFS layers in OpenLayers, containing Polygons. I try to make a tool to split these polygnos and save them to db. //The layer which I want spliting work on var contract_layer = ...
1
vote
3answers
88 views

Split a layer into a single layer

I have two multi-polygon layers, one a map of land uses, the other borders of administrative areas. I am interested in analyzing the amount of land use in each administrative area, but the polygons ...
1
vote
1answer
250 views

Distance of many polygons to a segmented line

I have a shapefile of U.S. counties. I also have a line segment. I want to compute the distance of each county to the line. I have also divided the line segment into 10 equal segments. I want to ...
1
vote
0answers
24 views

Split Polygon Layer by other Polygon layer in QGIS

I know there is a lot of previous posts to this subject, but I simply cannot find the solution I am after in the other posts. I have to following problem: I have two very extensive polygone layers, ...
1
vote
0answers
24 views

How Do I Split a Raster into parts using GDAL? [duplicate]

I have a large Raster with High resolution DEM of a large area, and I need to split it into smaller squares of 500mx500m, so that I can run other raster functions on it. Basically I'm looking for the ...
1
vote
0answers
51 views

need to split some linestrings by points

please help me, i'm new in gis 1) i have а table with geom railways, which are multilinestrings (for example there are 2 ways one of which is interrupted, so this way will be multilinestrings ...
1
vote
1answer
199 views

How to split polygon features using an overlaid polygon layer in QGIS?

I have a polygon layer (pictured below) that I made by vectorizing a clip from the USDA Cropland Data Layer. The low resolution of the USDA layer causes fields that are separated by narrow roads to ...