Division or partition of geometric features

learn more… | top users | synonyms

1
vote
1answer
19 views

Cut/Clip/Split a polygon with another polygon from same layer (Editing) - Qgis 2.8.1

To not have overlapping polygons/features I normally use a practice where I use one or more polygons to clip/shape other polygons. This is often much faster than tracing when adding polygons etc. I ...
2
votes
1answer
497 views

Splitting large shapefile into numerous smaller files based on number of objects in each smaller file using?

I have a shapefile containing approximately 600 000 point-objects. Unfortunately, for a couple of reasons I need to split this file into a larger number of shapefiles each containing approximately ...
0
votes
1answer
42 views

Split a shape file of lines into even spaced segments

I am using ArcGIS ArcMap 10.2. I have a shapeless of polylines and want to split them each line into 100 m segments. I can see under the editor toolbar the split tool and that can divide each line ...
2
votes
0answers
49 views

Creating python script to split selected lines at a set length

I have been having trouble trying to come up with a python script that will go through a polyline feature class representing a river system and split all the streams intersecting with a central river ...
0
votes
1answer
45 views

Splitting all polygon features in a shapefile into smaller equal width polygons

I have a shapefile of thousands of polygon features, that i would like to break up into smaller pieces (i.e. break a square into 8 equal pieces). I have read all over these boards for the right ...
2
votes
2answers
68 views

Method to split line segments in a road network that are greater than X length into n smaller line segments using ArcGIS?

I'm using ArcGIS Desktop 10.2 and I'd like to take roads in a network greater than a certain length and split them into equal smaller pieces. I've noticed that splitting by percent can be achieved via ...
3
votes
1answer
101 views

Splitting street in Address table which participates in Relationship Class (1-M)?

I have a table "Addresses" and the Feature "streets". The feature "Streets" are lines. I need to do a relation with this table with this feature. What I do? I tried built a "relationship class". The ...
1
vote
0answers
27 views

need to split some linestrings by points

please help me, i'm new in gis 1) i have а table with geom railways, which are multilinestrings (for example there are 2 ways one of which is interrupted, so this way will be multilinestrings ...
4
votes
1answer
145 views

Split single line based on the 3D length

so I have a transect line which I already add the z value using the Interpolate Shape. I need to split this line into 100m in 3D length, which due to elevation must be different than 2D. However the ...
0
votes
0answers
10 views

Divide/Split single polygons from one Shapefile using ArcGIS for Desktop? [duplicate]

I have a map of Austria which shows all the federal states in own polygons. As a whole - sure - you get Austria. I know how to make several states invisible so that you can just see particular states ...
0
votes
2answers
83 views

Split polyline where it intersects with other lines in MapInfo

I have a polyline (bus route) which I want to split where it intersects with other lines (not polylines) I have created. I'm happy to initially do it manually to see how it works, although I would ...
1
vote
1answer
53 views

FeatureToPolygon (to cut polygons by line) not working correctly outside of ArcGIS

I asked a question yesterday, about splitting polygons using a line, and I ended up using the approach that is described in the comments here. Although this worked with my test data, it causes a lot ...
2
votes
1answer
345 views

Optimizing ArcPy code to cut polygon?

There is a lot of nested loops and wondering of ways I could speed up this code? Any ideas? Note: This requires ArcMap 10.2 def cut_geometry(to_cut, cutter): """ Cut a feature by a line, ...
2
votes
1answer
117 views

Cutting polygon using line - cutter, cut() - using ArcPy?

What I'd like to do, using ArcPy: use a line to split a bunch of polygons into separate parts. Here is what the inputs could look like: In this case the line should split each polygon into two ...
0
votes
0answers
11 views

Spliting Raster Ortho to 8-bit Tiles

I'm trying to split a large orthophoto to smaller tiles in order to use them as textures on DEM tiles the same size in CityEngine. I've been using the Split Raster tool in ArcGIS to try and output ...
6
votes
0answers
74 views

Best way to cut linestrings with points

i was checking the best way to cut linestrings by points. The scenario is: lots of streets, need the segments cut by intersect points, kind of this: I got linestrings (full uncuted by points) ...
2
votes
1answer
84 views

Standalone Python script to split a polyline with a point layer

I have a polyline layer and a layer of points that are on top of the polylines. I do not have the ArcGis advanced license so I can't use the Split Line at Point tool. Can someone help me with a ...
9
votes
2answers
208 views

How to ST_Split features in one table by features in another?

I need to split polygons (layer 'pol') by both closed and non-closed linestrings (layer 'lin'). Unfortunately I don't get proper results running the following query. CREATE VIEW splitted_pol AS ...
5
votes
2answers
245 views

How to split lines with PostGIS and view the result in QGIS?

I have two tables, one contains lines (test_line) and the other contains the points at the vertices of the lines (test_line_vertex). I want to split the line into individual segments based on the ...
0
votes
0answers
20 views

How to split by attribute into own shapefiles? [duplicate]

I'm using ArcGIS 10.2 for Desktop. I have a shapefile with multiple polygons. I want to split the polygons into their individual shapefiles. I tried using the Split but get hung up on the ...
2
votes
1answer
278 views

Split polygon into several smaller polygons in QGIS

I have a layer of polygons depicting response boundaries, I would like to break each of these polygons into a number of sub-polygons. As this is for an exploratory project, the polygons themselves ...
1
vote
3answers
107 views

Cut polygon into new polygons using lines in ArcGIS

I'm new to GIS and I work with ArcMap. I have a layer with an orthophoto of a graveyard. On top of that, a layer with an old scanned map of the same area showing all graves. I would like to make a ...
0
votes
1answer
54 views

ModelBuilder, which tool should I use to rename layers with value from table?

Hi I have a ModelBuilder tool with an iterator that splits a feature into multiple shapefiles based on a attribute field. The problem I'm running into is instead of simply using the number values for ...
5
votes
2answers
1k views

How to split a Polyline Geometry at a certain point in ArcObjects?

I have a polyline geometry and wish to split it into two different geometries, based on a given point on that line, in ArcObjects. I have tried to find out how to do this, but to no avail. I found ...
0
votes
0answers
16 views

Using USGS Raster Split but getting errors

I am working on an issue where I am trying to split the 2011 nlcd .img file into counties. I am really just looking at the midwest, so I have state county shapefiles for IA, OH, MN, MO, IL, IN and WI. ...
2
votes
3answers
278 views

postgis linestring segmentation in 4326

How can I divide a single postgis linestring with SRID 4326 into segments (preferably an array of linestrings) with no segment longer than a given distance? I've tried st_segmentize(), but it spits ...
0
votes
1answer
484 views

How do you change starting point on a polyline? (split tool)

There must be an easy fix for this. I am using the split tool and I want it to split a polyline into equal parts. For some reason, it is starting in the middle of my polyline. How do I force it to ...
1
vote
1answer
82 views

How to split polygon features using an overlaid polygon layer in QGIS?

I have a polygon layer (pictured below) that I made by vectorizing a clip from the USDA Cropland Data Layer. The low resolution of the USDA layer causes fields that are separated by narrow roads to ...
1
vote
3answers
657 views

Divide Line Into Sections Using Points Offset from It in ArcGIS Desktop?

I have track (line) and milemarkers (point). Each point is offset by a different distance. Is there a way to find where each point would intersect the line if going perpendicularly out from the line? ...
1
vote
1answer
56 views

Ratio policy for Intersect in ArcGIS Online?

I have two polygon layers in ArcGIS Online (for organizations) stored as Feature Layers; one is population block, another is the AOI polygon. They are overlapping and I want to find out what portion ...
2
votes
2answers
507 views

Cut layer into many parts using shapefile?

I have a layer which is a map of a town, and a shapefile which shows the boundaries within that town. I wish to cut the layer up along each of the internal boundaries so that I end up with many ...
1
vote
1answer
803 views

ArcGIS 10.2 Extract Polyline from Start/End Coordinates

I have two files. A polyline shape file of highways and a spreadsheet that contains beginning and ending coordinates w/ descriptions of segments of the highways. For example: BegX, BegY, EndX, EndY, ...
2
votes
1answer
667 views

How to split zAware polyline by points programmatically with C#?

I'm trying to split a polyline by the boundaries of a polygon using IPolyCurve2.SplitAtPoints using C#. The polyline I'm trying to split is zAware and holds elevation values at a regular interval. ...
6
votes
5answers
12k views

How to Split Features in QGIS?

I am new at using QGIS. How can I simply split features in QGIS? The manual tells to simply draw a line through the polygon you want to split. But it doesn't work. The line disappears when finishing ...
0
votes
1answer
23 views

creating many Shapefiles from from a single multi-polygonal shapefile using ArGIS tools [duplicate]

I have a country shapefile with many districts polygons which are administrative boundaries, I want to have a shapefile for each of the district, which tool in ArcGIS can I use to accomplish this
0
votes
1answer
22 views

Can A PLugIn in QGis let me cut polylines where the points of another shapefile are [duplicate]

I want to know if there is a plugin/tool in Qgis, that let me cut lines of a shapefile where the points of another shapefile are. Thanks in advance!
1
vote
1answer
148 views

QGIS - split polyline

I need to create a shapefile with crossed streets. I can't split the lines to number each segment with the house number ranges.
2
votes
1answer
106 views

Cutting rectangle set (not squares) into triangles using ArcGIS for Desktop?

I have some large features that I need to split into smaller pieces for terrain alignment through vertices in another program. I figured triangles would be the best solution. So basically I want to ...
1
vote
0answers
25 views

ArcGIS 10.1 - identify Vehicle Routes from Segment Counts

We have vehicle counts on every road segment in a small portion of our city, but we are trying to determine the route of individual vehicles on these segments. Is there an algorithm in ArcGIS 10.1 ...
1
vote
1answer
79 views

Split field name of feature class in ArcGIS

Is it possible to split a field name within an attribute table of a feature class into two new fields where just the field name is being split. Please note that I do not need to split the features ...
0
votes
1answer
149 views

Split lines with points while maintaining other dissolved lines

I am on ArcGIS 10.2. I have a line feature class of a stream network. I also have a point feature class along the main stream (line) where a catchment enters that stream. I have dissolved my whole ...
2
votes
1answer
90 views

How to programmatically partition a large Polygon in smaller parts within a given Area Threshold?

I'm looking for a Java library, or even an algorithm to do the following: I have a large polygon, about the size of a large city. I need to break it down into smaller polygons such that: The area ...
1
vote
2answers
48 views

Splitting polgons in QGIS produces topology errors

I am trying to split existing polygons but when I do, gaps and overlaps are created between the polygon I am cutting and adjacent polygons. I have snapping switched on and have enabled topological ...
1
vote
3answers
376 views

How to split a line every x meters? [duplicate]

I have a line that I ultimately want to split up into points. The points should be every 100 meter along the line. So I don't want to extract the nodes. Are there any OpenSource (QGIS, Python) tools ...
2
votes
1answer
75 views

Split point shapefile by date attribute using ArcGIS for Desktop?

I have a point shapefile composed of points created on a Garmin in 2012 and 2013. They are in the format mm/dd/yyyy (there are other fields, but this is the one of interest). I was wondering if ...
4
votes
4answers
817 views

Split lines into non-overlapping subsets based on points

Given a table with line geometry, and one or more points that are snapped to this line in a separate table, I would like to split each line with one or more intersecting points at each of the ...
0
votes
1answer
99 views

What to use as split field or target workspace with Split tool?

I'm trying to use the split tool in arcgis 10.1 but I dont know what I should use as the split field or my target workspace. W:\S&P\s&p techs\Emily\Geodatabase\Geodatabase.gdb this is what I ...
2
votes
2answers
499 views

Using ST_split to split a line feature using nearby points

I have a line shapefile and a point shapefile, and the line has just one segment and its attribute table, the point shapefile has points near the line above, not on it and the close ...
1
vote
1answer
222 views

Force St_split() to return geometries in specific pattern

I'm Using PostGIS st_split() to split a polygon geometry by a linestring. Then I use st_dump() to return each of the splitted geometry and it is working fine. But the issue is I want to force ...
5
votes
0answers
97 views

Split polygon by area using ArcGIS for Desktop (or QGIS)? [duplicate]

I'm interested to split a larger, irregular polygon into smaller ones. I know the area of the resulting polygon, and I know that the line I want to split it by should be parallel to one of the sides ...