129 reputation
8
bio website
location NC
age
visits member for 2 years, 5 months
seen Apr 25 '13 at 16:37

Nov
27
awarded  Popular Question
Sep
19
awarded  Teacher
Apr
25
comment Are there any alternatives to ArcScene?
@Jakub How did CityEngine seem?
Apr
20
comment DEM to STL (3D Printer Format)
I am going to mark this as the best answer since it worked. Converting using Global Mapper was pretty dang easy. But, I wish there was a free/open source equivalent. Additionally, I was not able to print out the surface due to the printer being too small.
Apr
20
accepted DEM to STL (3D Printer Format)
Apr
20
asked DEM to STL (3D Printer Format)
Apr
11
comment Help with Parameters for MCC-LiDAR
Okay, I will give that a shot once I figure out how to get the data in a usable format for Topo to Raster from LAS format. Previously, when I have tried to run the tool the Shape.Z Field (in the Multipoint data) has not been selectable. I suspect it has to do the the field format, but am uncertain how to translate it to a correct format.
Apr
10
comment Help with Parameters for MCC-LiDAR
I reran MCC-LiDAR using the values you suggested (1.5 & 0.07). After interpolating with an IDW, I ended up with a lower RMSE than I had in prior iterations. Thanks for your help!
Apr
10
accepted Help with Parameters for MCC-LiDAR
Apr
4
awarded  Commentator
Apr
4
comment Help with Parameters for MCC-LiDAR
Just emailed you. Thank you very much!
Apr
4
comment Processing Full-waveform Lidar?
Sorry for the terribly late reply. The file format seems to be .lwv format but is stored in WFD files. I am not 100% sure what that means.
Apr
4
asked Help with Parameters for MCC-LiDAR
Mar
24
accepted ArcScene 10.1 Orthophoto Visualization Issue
Mar
24
answered ArcScene 10.1 Orthophoto Visualization Issue
Mar
19
comment ArcScene 10.1 Orthophoto Visualization Issue
Yes, Display Quality is at it's highest setting (past Normal). I did notice when I check "Display raster resolution in table of contents" that the Res is 1:6.6677, but it should be 1:1 (I would think) after going to Base Heights > Elevation from surfaces > Raster Resolution... and setting Cellsize X and Y to 1.
Mar
19
asked ArcScene 10.1 Orthophoto Visualization Issue
Sep
19
comment Processing Full-waveform Lidar?
Thank you for that information. I've done some reading regarding additional processing and noticed MATLAB quite a bit. Is there a particular extension/add-on you would suggest? The only one I have seen noted very much is Tiffs.
Sep
7
asked Processing Full-waveform Lidar?
Aug
6
accepted ArcGIS JS API Pop-Up w/TabContainer