Return to Question

David, If you post your question on the GIS stackexchange group http://gis.stackexchange.com/ I will provide an example code that should be helpful.

David, If you post your question on the GIS stackexchange group https://gis.stackexchange.com/ I will provide an example code that should be helpful.

So upon closer inspection, it appears that gdal is unhappy with the polar stereographic projection I'm using (EPSG:3413). See lines 1570-1574 here:

So upon closer inspection, it appears that gdal is unhappy with the polar stereographic projection I'm using (EPSG:3413). See lines 1570-1582 of netcdfdataset.cpp:

====================

Update 9/3/13 17:04 PDT

Here is gdalinfo output for one of my input datasets:

gdalinfo 20120901T2024_align_x+22.19_y+3.68_z+14.97_warp.tif

Driver: GTiff/GeoTIFF
Files: 20120901T2024_align_x+22.19_y+3.68_z+14.97_warp.tif
Size is 10666, 13387
Coordinate System is:
PROJCS["unnamed",
    GEOGCS["WGS 84",
        DATUM["WGS_1984",
            SPHEROID["WGS 84",6378137,298.257223563,
                AUTHORITY["EPSG","7030"]],
            AUTHORITY["EPSG","6326"]],
        PRIMEM["Greenwich",0],
        UNIT["degree",0.0174532925199433],
        AUTHORITY["EPSG","4326"]],
    PROJECTION["Polar_Stereographic"],
    PARAMETER["latitude_of_origin",70],
    PARAMETER["central_meridian",-45],
    PARAMETER["scale_factor",1],
    PARAMETER["false_easting",0],
    PARAMETER["false_northing",0],
    UNIT["metre",1,
        AUTHORITY["EPSG","9001"]]]
Origin = (-211346.063781524338992,-2245136.291794800199568)
Pixel Size = (5.000000000000000,-5.000000000000000)
Metadata:
  AREA_OR_POINT=Area
Image Structure Metadata:
  COMPRESSION=LZW
  INTERLEAVE=BAND
Corner Coordinates:
Upper Left  ( -211346.064,-2245136.292) ( 50d22'39.70"W, 69d23'55.59"N)
Lower Left  ( -211346.064,-2312071.292) ( 50d13'22.38"W, 68d48'10.75"N)
Upper Right ( -158016.064,-2245136.292) ( 49d 1'33.33"W, 69d26'16.42"N)
Lower Right ( -158016.064,-2312071.292) ( 48d54'35.06"W, 68d50'27.28"N)
Center      ( -184681.064,-2278603.792) ( 49d38' 1.32"W, 69d 7'17.04"N)
Band 1 Block=256x256 Type=Float32, ColorInterp=Gray
  NoData Value=-32767

Following up on Luke's suggested approach.

The vrt generation works fine:

gdalbuildvrt -separate newtest.vrt *warp.tif

<VRTDataset rasterXSize="10666" rasterYSize="13387">
  <SRS>PROJCS["unnamed",GEOGCS["WGS 84",DATUM["WGS_1984",SPHEROID["WGS 84",6378137,298.257223563,AUTHORITY["EPSG","7030"]],AUTHORITY["EPSG","6326"]],PRIMEM["Greenwich",0],UNIT["degree",0.0174532925199433],AUTHORITY["EPSG","4326"]],PROJECTION["Polar_Stereographic"],PARAMETER["latitude_of_origin",70],PARAMETER["central_meridian",-45],PARAMETER["scale_factor",1],PARAMETER["false_easting",0],PARAMETER["false_northing",0],UNIT["metre",1,AUTHORITY["EPSG","9001"]]]</SRS>
  <GeoTransform> -2.1134606378152434e+05,  5.0000000000000000e+00,  0.0000000000000000e+00, -2.2451362917948002e+06,  0.0000000000000000e+00, -5.0000000000000000e+00</GeoTransform>
  <VRTRasterBand dataType="Float32" band="1">
    <NoDataValue>-3.27670000000000E+04</NoDataValue>
    <ComplexSource>
      <SourceFilename relativeToVRT="1">20110619T2024_align_x+15.51_y+1.15_z+12.10_warp.tif</SourceFilename>
      <SourceBand>1</SourceBand>
      <SourceProperties RasterXSize="10666" RasterYSize="13387" DataType="Float32" BlockXSize="256" BlockYSize="256" />
      <SrcRect xOff="0" yOff="0" xSize="10666" ySize="13387" />
      <DstRect xOff="0" yOff="0" xSize="10666" ySize="13387" />
      <NODATA>-32767</NODATA>
    </ComplexSource>
  </VRTRasterBand>
  <VRTRasterBand dataType="Float32" band="2">
    <NoDataValue>-3.27670000000000E+04</NoDataValue>
    <ComplexSource>
      <SourceFilename relativeToVRT="1">20110802T2024_align_x+16.33_y+2.14_z+12.02_warp.tif</SourceFilename>
      <SourceBand>1</SourceBand>
      <SourceProperties RasterXSize="10666" RasterYSize="13387" DataType="Float32" BlockXSize="256" BlockYSize="256" />
      <SrcRect xOff="0" yOff="0" xSize="10666" ySize="13387" />
      <DstRect xOff="0" yOff="0" xSize="10666" ySize="13387" />
      <NODATA>-32767</NODATA>
    </ComplexSource>
  </VRTRasterBand>
...

But when I attempt to translate to nc, I get the following error:

gdal_translate -of netcdf newtest.vrt newtest.nc

Input file size is 10666, 13387
Warning 1: Variable has 0 dimension(s) - not supported.
0...10...20...30...40...50ERROR 1: netcdf error #-62 : NetCDF: One or more variable sizes violate format constraints .
at (netcdfdataset.cpp,SetDefineMode,1574)

ERROR 1: netcdf error #-39 : NetCDF: Operation not allowed in define mode .
at (netcdfdataset.cpp,IWriteBlock,1435)

ERROR 1: netCDF scanline write failed: NetCDF: Operation not allowed in define mode
ERROR 1: An error occured while writing a dirty block
...ERROR 1: netcdf error #-39 : NetCDF: Operation not allowed in define mode .
at (netcdfdataset.cpp,IWriteBlock,1435)

ERROR 1: netCDF scanline write failed: NetCDF: Operation not allowed in define mode
ERROR 1: netcdf error #-62 : NetCDF: One or more variable sizes violate format constraints .
at (netcdfdataset.cpp,~netCDFDataset,1548)

So upon closer inspection, it appears that gdal is unhappy with the polar stereographic projection I'm using (EPSG:3413). See lines 1570-1574 here:

https://code.vpac.org/gitorious/gdal-netcdf-testing/gdal-netcdf-driver/blobs/8fa3582669969ad4d55e461f5846b3ed33727f63/gdal/frmts/netcdf/netcdfdataset.cpp

My projection has a latitude_of_origin specified but no standard parallels as expected by the netcdf driver.