1

I am trying to read NMEA messages via GPSD (http://www.catb.org/gpsd/), but I do not know how to do that.

I have a GPS antenna which connects to the u-blox M8 GNSS Evaluation Kit Timin (https://www.u-blox.com/en/product/evk-8evk-m8) and this Kit is connected to Ubuntu laptop.

In the Terminal window, when I type "lsusb", it shows me the device successfully connect (for example: Bus 001 Device 036: ID 1546:01a8 U-Blox AG)

As I know when the GPS receive a signal, it should be putting NMEA messages out in each port, and should be mounted by TTYACM0.

The Laptop also installed NTP (Network Time Protocol)

My question is:

  • what does the GPSD do with that?
  • what can the GPSD log these messages?
  • How to confiure GPSD to set NMEA messages from the u-blox USB port?

closed as too broad by PolyGeo Mar 9 '17 at 20:57

Please edit the question to limit it to a specific problem with enough detail to identify an adequate answer. Avoid asking multiple distinct questions at once. See the How to Ask page for help clarifying this question. If this question can be reworded to fit the rules in the help center, please edit the question.

  • As per the Tour there should be only one question per question. – PolyGeo Mar 9 '17 at 20:58