0

I have created a network and have been attributing my various routes in a domain with a one-way field. At current all values are From-To (FT) in the one-way field. However the network does not honor the one-way restrictions.

I figure its within the VB script but I cannot work it out.

For example the road below has a One-Way set for FT but is not honored nor does the network recognize it if using Network Identify Tool.

Road Oneway Attributes

Network identify tool showing transferable in both directions

enter image description here

I am also using the default values Arc provides upon recognizing a field, as seen below:

From-To

enter image description here

To-From

enter image description here

Both source data and network edges are running in the correct direction (shown by arrow at end symbology). Oneway attribute is set to FT, but the network still shows its completely traversable.

Directionality

1

You may not have Evaluators set for your FT and TF fields in Network Analysis:

enter image description here

Source: https://support.esri.com/en/technical-article/000008060

FT or F indicates a one-way street permitting travel only in the digitized direction of the edge. TF or T indicates a one-way street permitting travel only against the digitized direction of the edge. N indicates a street that does not permit travel in either direction. Any other value indicates a street that permits travel in either direction.

http://desktop.arcgis.com/en/arcmap/latest/extensions/network-analyst/creating-a-network-dataset.htm

  • I believe so yea, thought I was on the right track with this here. Both From-To and To-From are Type: Field and Value: Expression with the exact expression that you have posted, with the FT/TF changed obviously. Edit: Also the default values are set to 'Use Restriction' – SapperM Apr 12 '18 at 20:59
  • Check your digitised direction of your network - see updated edit above – Mapperz Apr 13 '18 at 0:45
  • I have double and triple checked the direction of both the source data and the network edges and they are running in the correct direction. See latest edit. Still completely stumped, it's probably something simple, or its arc being arc....... thanks for your help so far though. – SapperM Apr 13 '18 at 7:59

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.