1

I am looking for a way to adjust/edit the values in a DEM file, for example, to grade a detention pond and berm into existing LiDAR data. I have tried messing around with point shapefiles and the IDW tool, but I am wondering if there is a better way. I can provide any additional details as needed.

closed as too broad by PolyGeo Oct 17 at 23:14

Please edit the question to limit it to a specific problem with enough detail to identify an adequate answer. Avoid asking multiple distinct questions at once. See the How to Ask page for help clarifying this question. If this question can be reworded to fit the rules in the help center, please edit the question.

  • 1
    What GIS software are you using? – PolyGeo Oct 16 at 22:49
  • I have access to both Standard license ArcMap 10.7 and QGIS – M. Gilliam Oct 17 at 23:02
  • Please always specify which of QGIS and ArcGIS Desktop you wish to ask about within a particular question so that it and its answers can be focussed on what you have tried and where you are stuck using that product. – PolyGeo Oct 17 at 23:16
0

QGIS has a simple and effective plugin named "Serval" that I believe will help you out. To install Serval, select Plugins > Manage and Install Plugins > All > and scroll down to Serval, and click the Install Plugin button. A Serval toolbar section is thus created.

Using Serval is pretty straightforward. It has 3 modes:

  1. Probing: Use this mode to change the value of a single cell. Click on a cell with the eyedropper cursor. The cell's band value(s) will be displayed in the Serval toolbar spinbox(es). Type in a new value(s) and - Voila! - the cell is updated.

  2. Drawing: This mode is useful if you need to adjust multiple cells to the same value(s) (for example, you want to set all the cells in your detention pond to the same elevation). Select the Serval Drawing button and then enter the new value(s) in the spinbox. With the pencil cursor, click on those cells that are to receive the new value(s) and - Voila! - the cells are updated.

  3. Erasing: When this mode is selected, clicked cells are set to the raster's NoData value.

The Serval toolbar has undo and redo buttons. However, if you exit the QGIS project, all changes are immediately applied to your raster. Thus, it is a good idea to make a copy of your raster prior to using Serval.

There is a similar product for the Arc Desktop environment: ARIS Grid and Raster Editor. However, it costs $400, and that's on top of the price to purchase Arc Desktop.

I've used Serval and ARIS, and they both get the job done just fine.

  • The Serval tool sounds PERFECT. I was not aware of that. Thank you so much for the explanation! – M. Gilliam Oct 17 at 23:03
  • You're welcome! Pretty amazing what collaborative, open-source software can do, eh? By the way, if my answer helped, please feel free to click the green check mark next to it. – Stu Smith Oct 18 at 4:38
1

If you are using ESRI products and you have point data with the proposed final elevation values of your project you can create a TIN from those points. Convert the TIN to a raster. Then replace that portion of the DEM with the raster version of your berm and pond. There is a lot of help to get you there online and these steps use standard tools.
Some considerations are:

  1. Ensure that your points use the same vertical datum as your LiDAR.
  2. Build a polygon that represents the extent of the proposed construction to act as a barrier (hard polygon in TIN speak) to limit the TIN and resulting raster to the extent of the project.
  • Yeah I have though about using points, but not about the polygon for the barrier. Thank you for the help! – M. Gilliam Oct 17 at 23:04

Not the answer you're looking for? Browse other questions tagged or ask your own question.