# What are the units in CRS EPSG:4326?

I have been searching for an answer to this question for a while now, and for some reason, I can't seem to find it.

How are the units defined in the EPSG:4326 system?

Are longitude and latitude written in degrees, minutes and seconds or are they written in decimal?

Some sources say that WGS 84 and EPSG:4326 are exactly the same things, others say they are different, but they don't provide the differences.

How should I be writing down the longitude and latitude in the EPSG:4326 CRS system?

• Representation is a very different issue than the underlying values. The value -95.5 can be represented 95.5W, 95.30W, 95.30.00W, and -5730 minutes and still represent the same angle. You can write values down however you want, so long as you remember how you encoded it (and how to decode). Commented May 2, 2021 at 15:30
• You should be writing latitude then longitude for one thing Commented Apr 14, 2023 at 14:00

Decimal degrees. Not so much the CRS as the way computers handle floats. They use decimal numbers, not sexagesimal values. Pretty much every CRS uses decimal numbers, whether they are spheroidal or projected.

• No, it does not have to be decimal, though in all likelihood it will be. Commented Nov 21, 2022 at 4:19

Create a point-layer in EPSG:4326 (I use QGIS), add a few features and label them with `\$x` to get the value of the x-coordinate: as you can see, decimal values are used. If you go to layer properties, extent as well is shown in decimal values, see second screenshot.

• I like this answer, as it encourages people to look at data they can create themselves. Commented May 2, 2021 at 15:32

The answer has already been given, but I feel that you would benefit from knowing this resource: https://epsg.io

It references all the EPSG CRS codes and gives for each: the unit, the ellipsoid, the datum and so on.

For instance for 4326: https://epsg.io/4326 it shows that the unit is degrees. In this case your question would probably not have been fully answered but it is a nice resource anyways when wondering the unit of a coordinate system for which you know the EPSG code.

As you can see 4326 is the EPSG code representing WGS84, so yes they are the same.

Your confusion probably stems from the fact that this coordinate system is based on an ellipsoid named WGS84 and a datum also named WGS84. Ellipsoid and datum are different in the sense that the ellipsoid defines the shape of the ellipse onto which the Earth is projected and that the datum defines where this ellipsoid "anchors" on Earth. The EPSG code represents the combination of the ellipsoid and the datum, so once you know it, you do not need to worry about the rest, it fully defines the horizontal coordinates system (including its unit).

https://epsg.io/4326 says "degrees (supplier to define representation)". The page for the unit is https://epsg.io/9122-units, which clarifies by saying "The degree representation (e.g. decimal, DMSH, etc.) must be clarified by suppliers of data associated with this code." That is, as a supplier, you are at liberty to write it out as decimal degrees or as signed degrees minute second or unsigned with a hemisphere specifier. as long as the unit is degrees. As a consumer of the data it means you need to be able to parse whichever format is used or have prior knowledge of the format used.

More strictly specified units exist: https://epsg.io/9107-units, https://epsg.io/9108-units, https://epsg.io/9110-units.

WGS84 and EPSG:4326 are different. The former is an ellipsoid, the latter is a full fledged coordinate system that makes use of the WGS84 ellipsoid.