The problem that I have is two layers are not positioning themselves correctly on the map screen, and shift position further when I pan the screen (they move closer or further away from each other, depending on the pan direction). One layer is a GeoTIFF that is correctly registered and uses CRS EPSG:32625, the other layer is a vector (country outline) that is also correctly registered with CRS EPSG:32625. The map canvas is also using the same projection.
Is there a setting somewhere that I have activated by accident?
UPDATE: it appears that that it is only the GeoTIFF that is problematic, I uploaded it to georeferencer.com and it located perfectly, while in QGIS it is constantly offset/jumps around when panning.
The data for the file reads:
Driver: GTiff/GeoTIFF Files: /Users/file.tif Size is 2047, 2079 Coordinate System is: PROJCRS["WGS 84 / UTM zone 25N", BASEGEOGCRS["WGS 84", DATUM["World Geodetic System 1984", ELLIPSOID["WGS 84",6378137,298.257223563, LENGTHUNIT["metre",1]]], PRIMEM["Greenwich",0, ANGLEUNIT["degree",0.0174532925199433]], ID["EPSG",4326]], CONVERSION["UTM zone 25N", METHOD["Transverse Mercator", ID["EPSG",9807]], PARAMETER["Latitude of natural origin",0, ANGLEUNIT["degree",0.0174532925199433], ID["EPSG",8801]], PARAMETER["Longitude of natural origin",-33, ANGLEUNIT["degree",0.0174532925199433], ID["EPSG",8802]], PARAMETER["Scale factor at natural origin",0.9996, SCALEUNIT["unity",1], ID["EPSG",8805]], PARAMETER["False easting",500000, LENGTHUNIT["metre",1], ID["EPSG",8806]], PARAMETER["False northing",0, LENGTHUNIT["metre",1], ID["EPSG",8807]]], CS[Cartesian,2], AXIS["(E)",east, ORDER[1], LENGTHUNIT["metre",1]], AXIS["(N)",north, ORDER[2], LENGTHUNIT["metre",1]], USAGE[ SCOPE["topographic mapping."], AREA["Between 36°W and 30°W, northern hemisphere between equator and 84°N, onshore and offshore. Greenland."], BBOX[0,-36,84,-30]], ID["EPSG",32625]] Data axis to CRS axis mapping: 1,2 Origin = (554638.780000000027940,7637602.000000000000000) Pixel Size = (40.000000000000000,-40.000000000000000) Metadata: AREA_OR_POINT=Area Image Structure Metadata: INTERLEAVE=PIXEL Corner Coordinates: Upper Left ( 554638.780, 7637602.000) ( 31d38'35.99"W, 68d50'39.40"N) Lower Left ( 554638.780, 7554442.000) ( 31d41'14.39"W, 68d 5'55.08"N) Upper Right ( 636518.780, 7637602.000) ( 29d36'48.13"W, 68d48'57.38"N) Lower Right ( 636518.780, 7554442.000) ( 29d43'22.79"W, 68d 4'16.86"N) Center ( 595578.780, 7596022.000) ( 30d40' 0.40"W, 68d27'37.93"N) Band 1 Block=2047x1 Type=Byte, ColorInterp=Red Band 2 Block=2047x1 Type=Byte, ColorInterp=Green Band 3 Block=2047x1 Type=Byte, ColorInterp=Blue
I am using QGIS version 3.22.3 on a Mac.