# Creating randomly shaped clumps of cells in a raster from seeds of 1 cell/pixel?

As my title says, I wish to "grow" clumps of cells from seeds within a raster. My base raster is full of 1's and 0's, 1's indicate land and 0's sea/NA areas. From the 1's I wish to select 60 random pixels/cells as my seeds, and then randomly grow a connected clump of a pre-defined no. of pixels/cells limit from that seed. I've heard the technique can be referred to as 'spread dye' but haven't had any luck finding much on it. The seed cell would be turned to a value of 2 and then the next cell chosen from surrounding 1's would be converted to 2 as well. 2's are then unavailable to be converted in future.

This thread does help a bit, as I would also be willing to do this in R as I'm familiar with reading and manipulating GIS data in R. However, what I require is a set of rules to randomly select pixels surrounding an existing clump.

If anyone has done this more basic form of cellular automata in a GIS setting then I would appreciate any advice/guidance.

Example:

I have a target of 250 cells. I randomly select one cell that has a value of 1. This is turned to a value of 2. Then, one of the neighbours of the seed cell that = 1 is turned to a 2. Then, one of the neighbours of either the cells with a 2 value is selected and turned to a 2. This would continue until a continuous shape numbering 250 cells is reached.

Edit: Further Questions

Based on whuber's great answer, I have a few questions about the code:

1. How do I get allocate the values of the grown cells to just a '2' rather than variable values which represent the order in which they were created?
2. I need to create 60 clumps of cells within my area of '1's. I have devised ways to pick random starting positions but struggle to make it all work within a loop using the `expand` function which you kindly wrote. Can you suggest a way to create 60 clumps which don't clash with each other and are contained within the same final matrix?

Edit: Further Explanation of Problem

Each clump of cells will represent a protected area of a defined size e.g. 250 cells. Each area needs to start on & grow into cells with a value of 1 as this represents land and avoid cells with a value of 0, as this represents sea. I need to iterate this 1000 times with 60 protected areas in each iteration to create a null model, showing what distributions of these areas will be by chance. For this reason, the total count of cells across all 60 areas will need to be identical in each of the 1000 iterations so they are comparable. Therefore, it's ok if the areas touch, but if there is a collision, then ideally the clump would grow in another available direction until the target of 250 is reached. Future modifications to this process will involve varying the size of each of the 60 areas and potentially the shape although I understand this would be difficult.

Once each of these 1000 protected area networks are created, they will be used as a mask against other raster data such as biodiversity measures to see (a) whether they intersect particular species ranges and (b) what % of particular species ranges these random networks of protected areas cover.

Thanks to @whuber for your help so far, I don't expect you to spend more time helping me, but thought I would try and clarify my situation as you have requested.

• Besides R, what other programming languages/software are you interested in using for this analysis? – Aaron May 13 '13 at 16:01
• I would also be happy to use ArcGIS or QGIS. Unfortunately I'm not that familiar with python. GDAL through a bash terminal is also a possibility. – JPD May 13 '13 at 16:04

I will offer an `R` solution that is coded in a slightly non-`R` way to illustrate how it might be approached on other platforms.

The concern in `R` (as well as some other platforms, especially those that favor a functional programming style) is that constantly updating a large array can be very expensive. Instead, then, this algorithm maintains its own private data structure in which (a) all the cells that have been filled so far are listed and (b) all the cells that are available to be chosen (around the perimeter of the filled cells) are listed. Although manipulating this data structure is less efficient than directly indexing into an array, by keeping the modified data to a small size, it will likely take much less computation time. (No effort has been made to optimize it for `R`, either. Pre-allocation of the state vectors ought to save some execution time, if you prefer to keep working within `R`.)

The code is commented and should be straightforward to read. To make the algorithm as complete as possible, it makes no use of any add-ons except at the end to plot the result. The only tricky part is that for efficiency and simplicity it prefers to index into the 2D grids by using 1D indexes. A conversion happens in the `neighbors` function, which needs the 2D indexing in order to figure out what the accessible neighbors of a cell might be and then converts them into the 1D index. This conversion is standard, so I won't comment on it further except to point out that in other GIS platforms you might want to reverse the roles of column and row indexes. (In `R`, row indexes change before the column indexes do.)

To illustrate, this code takes a grid `x` representing land and a river-like feature of inaccessible points, starts at a specific location (5, 21) in that grid (near the lower bend of the river) and expands it randomly to cover 250 points. Total timing is 0.03 seconds. (When the size of the array is increased by a factor of 10,000 to 3000 rows by 5000 columns, the timing goes up only to 0.09 seconds--a factor of only 3 or so--demonstrating the scalability of this algorithm.) Instead of just outputting a grid of 0's, 1's, and 2's, it outputs the sequence with which the new cells were allocated. On the figure the earliest cells are green, graduating through golds into salmon colors. It should be evident that an eight-point neighborhood of each cell is being used. For other neighborhoods, simply modify the `nbrhood` value near the beginning of `expand`: it is a list of index offsets relative to any given cell. For instance, a "D4" neighborhood could be specified as `matrix(c(-1,0, 1,0, 0,-1, 0,1), nrow=2)`.

It is also apparent that this method of spreading has its problems: it leaves holes behind. If that is not what was intended, there are various ways to fix this problem. For instance, keep the available cells in a queue so that the earliest cells found are also the earliest ones filled up. Some randomization can still be applied, but the available cells will no longer be chosen with uniform (equal) probabilities. Another, more complicated, way would be to select available cells with probabilities that depend on how many filled neighbors they have. Once a cell becomes surrounded, you can make its chance of selection so high that few holes would be left unfilled.

I will finish by commenting that this is not quite a cellular automaton (CA), which would not proceed cell by cell, but instead would update whole swathes of cells in each generation. The difference is subtle: with the CA, the selection probabilities for cells would not be uniform.

``````#
# Expand a patch randomly within indicator array `x` (1=unoccupied) by
# `n.size` cells beginning at index `start`.
#
expand <- function(x, n.size, start) {
if (x[start] != 1) stop("Attempting to begin on an unoccupied cell")
n.rows <- dim(x)
n.cols <- dim(x)
nbrhood <- matrix(c(-1,-1, -1,0, -1,1, 0,-1, 0,1, 1,-1, 1,0, 1,1), nrow=2)
#
# Adjoin one more random cell and update `state`, which records
# (1) the immediately available cells and (2) already occupied cells.
#
grow <- function(state) {
#
# Find all available neighbors that lie within the extent of `x` and
# are unoccupied.
#
neighbors <- function(i) {
n <- c((i-1)%%n.rows+1, floor((i-1)/n.rows+1)) + nbrhood
n <- n[, n[1,] >= 1 & n[2,] >= 1 & n[1,] <= n.rows & n[2,] <= n.cols,
drop=FALSE]             # Remain inside the extent of `x`.
n <- n[1,] + (n[2,]-1)*n.rows  # Convert to *vector* indexes into `x`.
n <- n[x[n]==1]                # Stick to valid cells in `x`.
n <- setdiff(n, state\$occupied)# Remove any occupied cells.
return (n)
}
#
# Select one available cell uniformly at random.
# Return an updated state.
#
j <- ceiling(runif(1) * length(state\$available))
i <- state\$available[j]
return(list(index=i,
available = union(state\$available[-j], neighbors(i)),
occupied = c(state\$occupied, i)))
}
#
# Initialize the state.
# (If `start` is missing, choose a value at random.)
#
if(missing(start)) {
indexes <- 1:(n.rows * n.cols)
indexes <- indexes[x[indexes]==1]
start <- sample(indexes, 1)
}
if(length(start)==2) start <- start + (start-1)*n.rows
state <- list(available=start, occupied=c())
#
# Grow for as long as possible and as long as needed.
#
i <- 1
indices <- c(NA, n.size)
while(length(state\$available) > 0 && i <= n.size) {
state <- grow(state)
indices[i] <- state\$index
i <- i+1
}
#
# Return a grid of generation numbers from 1, 2, ... through n.size.
#
indices <- indices[!is.na(indices)]
y <- matrix(NA, n.rows, n.cols)
y[indices] <- 1:length(indices)
return(y)
}
#
# Create an interesting grid `x`.
#
n.rows <- 3000
n.cols <- 5000
x <- matrix(1, n.rows, n.cols)
ij <- sapply(1:n.cols, function(i)
c(ceiling(n.rows * 0.5 * (1 + exp(-0.5*i/n.cols) * sin(8*i/n.cols))), i))
x[t(ij)] <- 0; x[t(ij - c(1,0))] <- 0; x[t(ij + c(1,0))] <- 0
#
# Expand around a specified location in a random but reproducible way.
#
set.seed(17)
system.time(y <- expand(x, 250, matrix(c(5, 21), 1)))
#
# Plot `y` over `x`.
#
library(raster)
plot(raster(x[n.rows:1,], xmx=n.cols, ymx=n.rows), col=c("#2020a0", "#f0f0f0"))
plot(raster(y[n.rows:1,] , xmx=n.cols, ymx=n.rows),
``````

With slight modifications we may loop over `expand` to create multiple clusters. It is advisable to differentiate the clusters by an identifier, which here will run 2, 3, ..., etc.

First, change `expand` to return (a) `NA` at the first line if there is an error and (b) the values in `indices` rather than a matrix `y`. (Don't waste time creating a new matrix `y` with each call.) With this change made, the looping is easy: choose a random start, try to expand around it, accumulate the cluster indexes in `indices` if successful, and repeat until done. A key part of the loop is to limit the number of iterations in case that many contiguous clusters cannot be found: this is done with `count.max`.

Here is an example where 60 cluster centers are chosen uniformly at random.

``````size.clusters <- 250
n.clusters <- 60
count.max <- 200
set.seed(17)
system.time({
n <- n.rows * n.cols
cells.left <- 1:n
cells.left[x!=1] <- -1 # Indicates occupancy of cells
i <- 0
indices <- c()
ids <- c()
while(i < n.clusters && length(cells.left) >= size.clusters && count.max > 0) {
count.max <- count.max-1
xy <- sample(cells.left[cells.left > 0], 1)
cluster <- expand(x, size.clusters, xy)
if (!is.na(cluster) && length(cluster)==size.clusters) {
i <- i+1
ids <- c(ids, rep(i, size.clusters))
indices <- c(indices, cluster)
cells.left[indices] <- -1
}
}
y <- matrix(NA, n.rows, n.cols)
y[indices] <- ids
})
cat(paste(i, "cluster(s) created.", sep=" "))
``````

Here's the result when applied to a 310 by 500 grid (made sufficiently small and coarse for the clusters to be apparent). It takes two seconds to execute; on a 3100 by 5000 grid (100 times larger) it takes longer (24 seconds) but the timing is scaling reasonably well. (On other platforms, such as C++, the timing should hardly depend on the grid size.) • Hi Whuber. Thanks so much for this, I really appreciate it. I'm just experimenting for a bit and may come back with a few followup questions soon. – JPD May 14 '13 at 14:47
• +1 Thank you for providing such thorough answers to some of the more complex questions on GIS SE. – Radar May 14 '13 at 21:36
• @whuber. Have expanded the question a little based on your answer. Thanks again! – JPD May 15 '13 at 15:36
• The answer to #1 is trivial: replace the line `y[indices] <- 1:length(indices)` by `y[indices] <- 2`. The answer to #2 is almost as simple: just loop. – whuber May 15 '13 at 15:50
• @whuber. Thanks again for the update. There is now the issue of clumps clashing, and resulting clumps sizing less than the number defined in `size.clusters`. How could I make sure a clump grows to the correct size, as, at the moment, I assume it tries to grow into an existing clump, fails, but still registers as a successful expansion. I then also intend to iterate the production of the 60 clumps 1000 times creating an average null model style dataset. Would the random positioning vary each time within a `for` loop? – JPD May 16 '13 at 14:38

Without ever having performed your operation, and no time to spare for play, I can only add these two links to your list:

Find the Nearest Raster Cell Value Based on a Vector Point (The first answer (with 4 votes) is what intrigued me).